HAVIT Lighting HV3591RGBW-BLK Halo RGBW LED Wall Light Instructions
- June 5, 2024
- Havit Lighting
Table of Contents
HAVIT Lighting HV3591RGBW-BLK Halo RGBW LED Wall Light Instructions
Important Safety Issues:
- This product must be installed by a qualified electrician according to AS/NZS 3000.
- Ensure all electrical mains are disconnected before any installation.
- Modification of this product will void any warranty.
- Havit Lighting does not take responsibility for wrong installation, incorrect use, or use of installation material that does not belong to the system.
- Aluminium and 304SS fittings must not be installed within 5km of any salt water environments.
- All o-rings and seals must be in place correctly to maintain warranty
- This form may be updated at any time due to product improvements, please check online installation form for most current version.
Steps for Installation:
- Make sure that the electrical circuit is free of voltage (master switch off )
- Loosen allen screws on side of fitting
- Remove base plate from fitting
- Install base plate to wall in desired location using appropriate screws for application.
- Seal all holes including cable entry hole and mounting screws.
- Use an appropriate 12v DC LED Driver – DO NOT CONNECT LIGHT FITTING DIRECT TO 240V
- Connect the cable, Connect live then neutral wires.
- Reattach fitting to base plate making sure allen screws are tight to avoid water penetration
- Apply silicon around edge of base to prevent any water from getting inside to electrical connections.
- See APP Installation Instructions for connection to tablet or smartphone.
- All connections must be carried out carefully, inspect all contacts before switching back on the electric circuit.
Steps for Connection to Smartphone or Tablet:
- Download EASYLIGHTING App from APP Store or Scan QR Code
- Change WIFI to Easylighting
- Open APP on Smartphone or Tablet
- Use direct connection with WIFI Controller
- Press Learn button on receiver
- Press Wheel on APP
- Light will flash when pairing is Successful.
Steps for Connection to Home Network:
- Connect Controller to home network
- Press I got it and then Yes
- Select WIFI you wish to connect to.
- Enter Password
- Close APP and Reopen
- Controller will now be connected to Home Network
Controls for Smartphone or Tablet:
Must be installed by a licensed electrician
Contact Details:
143 Beauchamp Road
Matraville NSW 2036
Australia
Tel: 02 9381 8300
Fax: 02 9666 8881
Email: sales@havit.com.au
Web: www.havit.com.au
**Warranty Terms & Conditions***
Additional Information
Documents / Resources
|
HAVIT Lighting HV3591RGBW-BLK Halo RGBW LED Wall
Light
[pdf] Instructions
HV3591RGBW-BLK, HV3591RGBW-WHT, HV3592RGBW-BLK, HV3592RGBW-WHT, HV3593RGBW-
BLK, HV3593RGBW-WHT, HV3594RGBW-BLK, HV3594RGBW-WHT, Halo RGBW LED Wall Light,
HV3591RGBW-BLK Halo RGBW LED Wall Light
---|---