KROAK S41610 Car Refrigerator User Manual

June 5, 2024
KROAK

KROAK S41610 Car Refrigerator CAR REFRIGERATOR
Model S41610

Product function introduction

  • Using high-quality DC inverter compressor and drive module to create an efficient, energy-saving, and stable mobile refrigeration system.
  • Microcomputer intelligent control system, easy to operate, and precise temperature control.
  • Innovative and intelligent independent dual temperature and dual control, the freezer/refrigeration space can be switched at will to meet different storage needs.
  • Compatible with a variety of power inputs, intelligent identification of
  • DC12/24V voltage, to meet the needs of various scenarios, car, marine, home, outdoor as you like.
  • With voltage detection and low-voltage protection functions, it can effectively prevent the over-discharge of car batteries.
  • The inner tank is made of food-grade plastic material, which is safe, leak-proof, and odor-proof.
  • Built-in LED lighting, is more convenient to use at night.
  • High-definition LED digital display.
  • Intelligent touch operation buttons and keyboard child lock function to prevent false triggering.

Product use safety

  • Do not touch the exposed power cord with your hands.
  • Do not touch power sockets and power strips with wet hands as this can cause danger.
  • When using this product on board, please ensure that the power supply lines and fuses have sufficient carrying current.
  • When using AC devices on cars, RVs, and yachts, professional installation is required.
  • Make sure the power connection is correct.
  • Do not immerse this product in water.
  • Do not put cans, beer, etc. in the refrigerator to freeze at low temperature.
  • Do not place any electrical equipment in the refrigerator.
  • Professionals are required to perform maintenance services, or please contact your seller.
  • Do not use this product by exposing it to rain or strong sunlight for a long time.
  • After the refrigerator is received and unpacked, please stand for more than 6 hours.

Simple operation instructions

KROAK S41610 Car Refrigerator -
instructions

Temperature control range: -20℃-20℃ (-4℉∽68℉)
Temperature display range: -30℃-40℃ (-22℉∽104℉)
Standard voltage input range: DC12V/24V, up to DC30V

  1. Open and close the refrigerator: Connect the correct DC12/24V power supply. If the refrigerator is in the standby state, the “OFF” symbol will appear in the middle of the display after the refrigerator self-test is completed. At this time, you need to press and hold the “Power button” for 3 seconds to complete the startup. After the refrigerator is turned on, the display will show the current temperature and working mode of the refrigerator. After waiting for the power-on delay (the factory default is 1 minute), the refrigerator enters the working mode, and the compressor starts to work to cool down. To turn off the refrigerator, press and hold the “Power button” for 3 seconds while the keyboard is unlocked.
  2. Refrigerator keyboard locking and unlocking operations: For example, when the keyboard is locked (the child lock icon is on in the lower right corner of the display screen), long press the “UP/DOWN” button for 3 seconds to unlock, and the child lock icon will not light up, and the keyboard will be locked automatically if there is no operation for 30 seconds.
  3. Compressor working mode setting: In the unlocked state of the keyboard, press the “Set button” to freely switch the compressor working mode “ECO/MAX”, if you need to quickly cool down to a lower temperature, switch to “MAX” mode, if you only need to refrigerate or keep warm, you can set the It is set to “ECO” mode to save energy.
  4. Low voltage protection function setting: This product has a low voltage protection function. When it detects that the battery voltage is lower than the set value, it will automatically turn off the compressor to prevent over-discharge from damaging the battery or causing the car to fail to start normally. At this time, the “EI” code prompt will be displayed on the display screen, such as 1 minute after the voltage returns to normal, the refrigerator will automatically enter the working state. The factory default is “Mid-Range”, if you need to change it, follow the steps below: Unlock the keyboard Press and hold the “Set button” for 3 seconds, release it after hearing the “di” sound of the buzzer, and then briefly press the “Set button” again, and one of the battery protection level icons “L, M, H” on the display will flash. Display and then press the “UP/DOWN” to change the setting. Refer to the following table for specific values: a: b:
    battery protection| 12V disconnect| 12V start| 24V| 24V start
    ---|---|---|---|---
    L| 9.6 V| 10.9 V| 21.3 V| 22.7 V
    M| 10. 4 V| 11. 7 V| 22.8 V| 24.2 V
    H| 11.1 V| 12.4 V| 24.3 V| 25.7 V

Note: If your refrigerator enters battery protection early, it is likely that the low voltage protection value is set too high due to insufficient power supply voltage. Or your DC power supply is wired incorrectly and cannot provide enough current. Check whether the power wiring is suitable, and consider lowering the battery protection gear appropriately. In order to ensure that the car can be started normally, it is recommended to set the protection level to “H” when using the refrigerator in the car.

  1. Refrigerator temperature setting operation: In the unlocked state of the keyboard, the temperature settings of the L temperature zone and the R temperature zone can be set by pressing the “Set button”, and then the “UP/DOWN button” can be used to adjust the temperature rise or fall of the refrigerator (a group of temperature values on the display screen flashes to display the current setting value, the temperature rises or falls by 1 degree each time), if you press and hold it, you can quickly adjust to the required temperature value, if there is no change within 5 seconds, the set value will be automatically saved.
  2. Refrigerator L temperature zone and R temperature zone close setting operation: (L and R temperature zones cannot be closed at the same time) In the unlocked state, when setting the temperature, press the “Set button” to switch,the L temperature zone and the R temperature zone will flash, if the L temperature zone is flashing, press the “power button” at this time, the L temperature zone will be turned off, and “OFF” will be displayed. Press the “power button” again to switch to the normal temperature value display. Press “SET” again, the R temperature zone flashes, press the “Power button” at this time, the R temperature zone is turned off, the display “OFF” is turned off and then press the “Power button” to turn to the normal temperature value display.
  3. APP operation instructions
  4. The car refrigerator is connected to the power supply and the Bluetooth icon flashes on the display.
  5.  Download and install the Tuya Smart APP program, turn on the Bluetooth of the mobile phone, and click to enter the Tuya Smart APP program
  6. Under normal circumstances, the device can be automatically discovered, click the add button. Tuya Smart
  7. If the phone cannot automatically discover the device, click Add DeviceKROAK S41610 Car Refrigerator - automatically
  8. After discovering the device, click Add
  9. After the device is successfully connected, click the “Done” buttonKROAK S41610 Car Refrigerator - successfully
  10. Enter the Bluetooth APP control interface

If the Bluetooth connection is not successful, you can press and hold the “Settings” and “Power On/Off” buttons at the same time for three seconds, and wait for the Bluetooth logo on the screen to reset and flash, and then connect again.

Error code description

When the compressor, module, fan, and temperature sensing head are abnormal and the input voltage is too low, an error code will appear on the display screen, and the compressor will stop working. When the abnormality is eliminated, unplug the power supply and plug it back in to return to the temperature display in the box and the compressor cooling mode will start to work after 1 minute.

See the table below for code description

Error code Problem description Solution
E 0 The temperature sensor is damaged Check or replace the temperature

sensor
E 1| The input voltage is too low| Check the input voltage
E 2| DC fan overcurrent protection| Check the cooling fan
E 3| Compressor starts abnormal protection| Power off and stand for 30 minutes to restart
E 4| Compressor speed abnor- mal protection| Adjust compressor operating mode (MAX/ECO)
E 5| The module temperature is too high| Move the refrigerator to a ventilated

Technical Parameters

Model ED40 ED50 ED60
Input voltage DC 12V/24V, AC 100-240V
Temperature control range -20<C-20<C(-4°F-68°F)
Refrigerant R134a
Insulation materials Polyurethane foam
Electricity power 60W±20%
Rated current 5.0A/2.5A
Net weight 15.5Kg 15.9Kg 16.3Kg
Product size(LWH)mm 674409466 674409516 674409583
Packing size(LWH)mm 770520525 770520575 770520642

Standard packing list

1. Portable car refrigerator
2. L=3.5m DC cigarette lighter

Optimal Storage Temperature Recommendations

| Purified water| 5 °C (41°F)
---|---|---
| Drink| 5 °C (41°F)
| Fresh juice| 8-10 °C ((46-50°F)
| Wine| 13°C ((55°F)
| Fruit| 5-8 °C ((41-46°F)
| Vegetable| 3-10 °C ((37-50°F)
| Delicatessen| 4 °C ((39°F)
| Seafood| -3 °C ((27°F)
| Seafood| -18°C ((-0°F)
| Frozen food| -18 °C ((-0°F)

FCC WARNING
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.
    To maintain compliance with FCC’s RF Exposure guidelines, This equipment should be installed and operated with a minimum 20cm distance between the radiator and your  body: Use only the supplied antenna.

MANUFACTURER NAME
Anhui Saichao Electric Co., Ltd
MANUFACTURER ADDRESS
Building 4, magnetoelectric Industrial Park, Huaining Industrial Zone, Anqing
City, Anhui Province
SCHEUFER Technologies GmbH
Address: Hertleinstrasse 37, 91052, Erlangen, Germany
E-mail: Mark.Zhang@scheufer.com
VISHTEC UK Co.,Ltd
Address: Unit G25 Waterfront Studios,1 DockRoad,London,E16 1AH
E-mail:Vincent.feng@vish-tec.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals