Translation of the original instructions
Bench drill

GTB 14/509
55201

GTB 14 Column Drill

 Please read the instructions carefully before starting the machine.

EU Declaration of Conformity

  DELIVERED ITEMS

Assembly

Spindle speed

Clamp drill

Clamp the workpiece

Operation

Maintenance

Technical Data

Noise details
Sound pressure level LpA
Sound power level LWA| 58 dB (A)
71 DB (A)
Wear ear protectors!|

The numerical values given are emission levels and not necessarily safe working levels. Although there is a correlation between the emission levels and the acceptable exposure levels, they cannot be reliably used to determine whether or not any additional safety measures are necessary.
The characteristics of the workspace, and other sources of noise, i.e. the number of machines and other processes running in the vicinity, and so on, are all factors that can influence the actual exposure levels of the employees.
Moreover, the acceptable exposure levels can vary from country to country. This information should enable the machine‘s operator to carry out a better assessment of the risks and hazards.

 Read and understand the operating instructions before using the appliance. Familiarise yourself with the control elements and how to use the appliance properly. Abide by all the safety measures stated in the service manual. Act responsibly toward third parties.
The operator is responsible for accidents or risks to third parties.
Persons over 16 years of age can only work on the appliance. An exception includes youngsters trained in order to reach knowledge under the supervision of the trainer during occupational education.
In case of any doubts about connection and operation refer, please to our customer center

Specified Conditions Of Use
Bench drilling machine for light and medium drilling work in wood, metals, and plastics.
The machine may only be used in a technically perfect condition and take into account all safety information.
Do not use this product in any other way as stated for normal use. Not observing general regulations in force and instructions from this manual does not make the manufacturer liable for damages.

 It is strictly prohibited to disassemble, modify and purposely remove the protective equipment on the unit and fit other protective equipment instead.

Even when the device is used properly and all safety regulations are complied with, there still may be some residual risks.

• noise emissions

• dust emissions

• vibrations to hands and arms

• Danger of burns
  Tool and workpiece heat up during operation.

• Risk of injury
  Sharp tools and workpiece edges

Emergency procedure
Conduct a first-aid procedure adequate to the injury and summon qualified medical attendance as quickly as possible. Protect the injured person from further harm and calm them down. If you seek help, state the following pieces of information: 1. Accident site, 2.
Accident type, 3. A number of injured persons, 4. Injury type(s)

Symbols

Wear ear protectors!
| Keep dry at all times. Never expose the tool to rain.
| Always keep children and unauthorized persons out of reach of the appliance.
| Forbidden operation for persons with chainlet
| Forbidden operation for persons with long hair.
| Do not operate the power tool when wearing a tie
| Any damaged or disposed of electric or electronic devices must be delivered to appropriate collection centers.
| CE marking

General safety information

WARNING!
When using electric tools the following general safety instructions must be obeyed to protect yourself from electric shocks, injury, and fire risks.
Read all these instructions before using this electric tool and keep the safety instruction in a safe place.
Keep your work area clean and tidy. Untidy workplaces and workbenches increase the risk of accidents and injuries.
Do not expose the appliance to rain and do not use it in wet or moisture conditions.
Provide adequate lighting or good lighting conditions when working with the machine.
Do not work with electric tools in conditions with flammable liquids, gases, or dust. Electric tools produce sparks able to ignite dust or fumes.
Protect yourself from electric shock.
Avoid body contact with earthed objects (for example pipes, radiators, electric stoves, and cooling units). There is an increased risk of electric shock if your body is earthed. Keep children and bystanders away while operating a power tool. Do not touch the electric tool or the cable. When not concentrated, you may lose control over the machine.
Ensure that you store electric tools in a safe place.
Tools that are not in use must be stored in a dry place as high as possible out of the reach of children or in an inaccessible place.
Do not overload the machine. Use appropriate electric tools for your work. Working with appropriate electric tools is better and safer when within the specified power range. They will work better and more safely in the specified power range.
Do not use the electric tool for purposes for which it is not designed. For example, do not use a manual circular saw for cutting branches or logs.
Dress properly. Do not wear loose clothing or jewelry. Keep your hair, clothing, and gloves away from moving parts.
We recommend that you wear non-slip shoes when working outdoors. Wear a hairnet if you have long hair.
Use protective equipment which fits you. Wear safety goggles and ear protection at all times. A dust mask or respirator is also required. Wear tight-fitting gloves at all times when handling sharp blades and saw blades, If dust exhausters and catchers are to be installed, make sure they are fitted and used properly.
Using a dust exhauster may reduce the exposure to dust. Do not use the cable in conflict with its designation, to carry or hang electric tools, or to pull the plug out of the socket. Protect the cable against high temperatures, oil, sharp edges, or moving parts of the machine.
Damaged or entangled cables increase the risk of electric shock. Secure the workpiece. Use clamping equipment or a vice to secure the workpiece. This will be safer than holding it in your hand. Avoid any abnormal body posture.
Provide good stability and keep the balance at all times. By this, electric tools are better controlled in unexpected situations. Treat electric tools carefully. Keep the cutting tools sharp and clean. Carefully treated cutting tools with sharp edges get stuck less often and are easier to guide.
Follow the instructions for lubricating and changing tools.
Check the connection cable on the electric tool at regular intervals and have it replaced by an expert if it is damaged.
Check the extension cables at regular intervals and replace them if they are damaged.
Keep the handles dry, clean, and free of oil and grease.
Pull the plug out of the socket and/or remove the battery when the tool is not in use before you make machine settings or change accessories, such as the saw blade, drill bit, or cutter. This safety measure prevents the unintentional starting of the electric tool.
Before starting any electric tool, remove any adjusting wrenches and screwdrivers. A tool or a wrench present in the rotating part of the machine may lead to injuries.
Prevent the machine from unintentional starting.
Before plugging and/or connecting the machine to the battery, handling, or carrying, make sure the electric tools are switched off. Having a finger on the switch when carrying the electric tool or when the machine is on when plugging it may lead to injuries.
If you wish to work outdoors with an electric tool, only use extension cables that are approved for outdoor use and are marked accordingly. Using an extension cable suitable for outdoor use reduces the risk of electric shock.
Be careful, pay attention to what you are doing, and use common sense when working with electric tools. Do not use electric tools when you are tired or under the influence of drugs, alcohol or pharmaceuticals. A moment of inattention when using electric tools may lead to serious injuries.
Check the machine for any damage: Before using the equipment again, the protective equipment must carefully be checked if safe and working as designated.
Check the moving parts for perfect functioning, if working smoothly and if no parts are damaged. To provide safe operation of the equipment, all parts must be installed properly and meet all conditions.
Damaged protective equipment and parts must be professionally repaired or replaced by a recognized professional workshop unless otherwise specified in the Operating Instructions.
Do not use electric tools with a defective switch.
An electric tool that cannot be switched on or off is dangerous and must be repaired.
Has your electric tool been repaired by an electrician?
These electric tools comply with the relevant safety regulations. Repairs may only be carried out by an electrician using genuine spare parts; otherwise, the user may suffer accidents.

Caution!

The machine must be secured to the floor using suitable screws since otherwise there is a risk that it will tip over.

Inspect before each use.

• Proper function of the on and off button, incl. the emergency switch.
• Carry out a visual inspection before switching the appliance on.
• Check especially the safety equipment, electrical control elements, power lines, and screw couplings for any damage and if they are tightened appropriately. If necessary, replace damaged parts before operating.
• Ensure that the bench clamping lever is tightly secured before starting up the machine.
• Ensure that the drill is safely secured in the clamping chuck.
• REMOVE ADJUSTING KEYS AND WRENCHES. Form a habit of checking to see that keys and adjusting wrenches are removed from the tool before turning it “ON”.

Risk of injury!
Keep body parts and clothes away from rotating parts of the device.
Use protective equipment which fits you.
Wear a hairnet if you have long hair.
Do not wear gloves when operating a drill.
Do not attempt to drill into a material that does not have a flat surface, unless you are using suitable support.
Never start the drilling machine with the drill pressed against the workpiece.
Always use clamps, chuck jaws, or a vice to secure the workpiece to the bench.
Set the drilling machine to a speed that is appropriate for the specific job.
In the event of a blockage, switch off the machine immediately. Pull out the mains plug and remove the jammed workpiece.
Chips and splinters must not be removed while the machine is running.

Mains Connection
 Operation is only allowed with a safety switch against stray current (RCD max. stray current of 30mA).
Connect only to a single-phase AC current supply and only to the mains voltage specified on the rating plate. Must only be used from sockets with earth wire.
Only plug in when the machine is switched off.

Maintenance

  Unplug the machine before any work on it.
Carry out a visual inspection before switching the appliance on. The appliance must not be used if damaged or safety equipment is defective. Replace any worn-out and damaged parts.
Caution!  If the power cord of the appliance gets damaged, it must be replaced by the manufacturer or its customer service or a similarly qualified person to avoid danger. Repairs and works specified in these Instructions may only be performed by qualified authorized staff. Use only original accessories and original spare parts. Keep the device, in particular the air vents, clean at all times. Never spray water on the device’s body!
Do not clean the plastics with solvents, flammable or toxic fluids. For cleaning, use a damp cloth only. Apply environment-friendly oil to all moving parts. Only a regularly maintained and treated appliance can serve as a satisfactory aid. Insufficient maintenance and care can lead to unforeseen accidents and injuries. If required, you can view the spare parts list on the homepage of our service partner Güde GmbH & Co. KG at www.guede.com.

Guarantee

The warranty period of 12 months applies to commercial use and 24 months applies to private use and commences on the day of purchase of the device.

The guarantee solely covers inadequacies caused by a material defect or manufacturing defects. An original payment voucher with the date of the sale needs to be submitted for any claim in the guarantee period.

The guarantee does not cover any unauthorized use such as appliance overloading, use of violence, or damage as a result of any unauthorized interference or caused by foreign items.
Failing to follow the operating and assembly instructions and common wear are also not included in the guarantee.

Important information for the customer
Please be sure to know that returning the product in or after the warranty period must be made in the original packaging.

Service

Do you have any technical questions? Do you have a complaint? Do you require spare parts or an operating manual? You can get quick and unbureaucratic assistance in the Service section on the homepage of our service partner Güde GmbH & Co. KG (www.guede.com). Please help us to help you. In order to be able to identify your device in the case of a complaint, our service partner will require its serial number, article number, and year of manufacture. All this information can be found on the nameplate.

Tel.: +49 (0) 79 04 / 700-360
Fax: +49 (0) 79 04 / 700-51999
E-Mail: support@ts.guede.com

Inspection and maintenance plan

Regular servicing period| Before any start-up| After every start- up| If necessary
---|---|---|---
Check the safety devices| √| |
Inspect and, if necessary, tighten the fan belts| √| |
Lubricate the columns and the bench with a thin layer of oil| | √|
Clean the tapered mandrel| | | √
Clean the machine of drilling dust or metal shavings| | √|

Translation of the EC-Declaration of Conformity
We, hereby declare the conception and construction of the below mentioned appliances correspond – at the type of construction being launched – to appropriate basic safety and hygienic requirements of EC Directives.
In case of any change to the appliance not discussed with us the Declaration expires.

Bench drill

55201 / GTB 14/509

Appropriate EU Directives

Annex IV
Notified Body
No: 0123

Name: TUV SUD Product Service GmbH
Adress: Ridlerstrasse 65
80339 München Germany

Type Ex. Cert.-No.:

97/68/EC_
Emission No.: 2000/14/EC_2005/88/EC
Method of compliance assessment
Wolpertshausen, 31.08.2015

Harmonized standards used

EN 61029-1:2009/A11:2010
EN ISO 12100:2010
AfPS GS 2014:01 PAK
EN 55014-1/A2:2011| EN 55014-2/A2:2008
EN 61000-3-2/A2:2009
EN 61000-3-3:2013
---|---

Guaranteed sound power level:  LWA dB (A)
Measured sound power level:  LWA dB (A)

Helmut Arnold: Managing Director
Authorized to compile the technical file

GÜDE GmbH & Co. KG Birkichstrasse 6
74549 Wolpertshausen Deutschland
Tel.: +49-(0)7904/700-0
Fax.: +49-(0)7904/700-250
eMail: info@guede.com

TN 55201 2016-05

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>