wedoking Sleep True Wireless Bluetooth Headset User Guide

wedoking Sleep True Wireless Bluetooth Headset

Note: Earphones are not touch sensitive, need to be used with charging case and mobile phone!

1. Charging Case
2.  Charging Case Status Lights
3. Charging Pins
4. Magnetically Snap
5.  Charging Contacts
6. Earbud Nozzles
7. Reset Button Embuds Microphone
8. Typc-C Earbuds Status Charging Light/ Port

ACCESSORIES CONTENTS

1. Eartips (sizes S and L)
   NOTE: Size M earllps and short c:;ips l’HA alt..iched to the earhuds

2.  2x L/S Short EarOud Caps

3. 3x SIM/L Long Earbud Caps

4. Type-C Cable

Tips: Please peel off the protective film for the earbuds before initial use

TRY ANOTHER EARTIP SIZE

Wear secure. the or earbuds sound for an quality isnextended ‘t as period expected, of time. If another the eartips earlip don’t size. feel comfortable
or The size is marked on the bottom of each eartip try with a small, medium, or large. The size M eartlps and caps come attached to the earbuds. 11 size M feels too loose. You try size may S. If need it to feels try all too three tight, try eartip size sizes L. or use a different size eartip for each ear.

CHANGE THE EARTIPS

1. Holding the earbud, gently stretch the eartip base and peel ii away rrorn the earbud
   CAUTION: To prevent tearing, DO NOT pull on the top of the eartip.

2.  Align Choose the a new earbud eartip nozzle size.

3. with the back of the eartip, and slide the earbud nozzle

4.  onto Gently !he earlip. stretch the eartip base around the nozzle, and press down until the eartip

5. clicks Insert the securely earbuds Into place. and choose a new ear cap to press down.

6. Tips; Check the fit

CHARGE THE EARBUDS

contacts on the left earbud with the charging pins on the left side

1. Align the charging charging case.
2. Place the earbud in the charging case until it according magnetically to the charging snaps into status. place.
3. Made Repeat sure steps the 1 -earbud 2 for the status right light earbud. glows
4.  NOTE: Close If the the case charging is also case. charging, it can remain open.

CHARGE THE CHARGING CASE
Please with the chargin!] case closed, connect the USB cable to wall charger (not The provided) charging case stntus lig his glow nccording to the charging status.
Shows Batlery the status charging case battery level.

NOTE: When the c.:ise is charging, the last light blinks according lo the current solid ballery wt1ite. level. When it is fully charged, all four charging case slatus lighls glow

POWER ON

1. place both ear buds in the charging case until they magnetically snap into place,  and The the earbuds earbuds power status on lights when you display lake it charge out of status. the charging case.
2. The earbud  status lights glow till you hear ‘slar up”.

POWER OFF

1. Place both  earbuds in charging case
2. The earbud status lights the glow according . lo the charging status
3. Close the case. the earbuds keep charging and Bluetooth connection is off. snap
   NOTE: into Make place, Sure and to the place Barbuds both status earbuds in lights the display charging charge case slat until us. they magnetically

Eartlps

| Remove the tips from theearbuds and wash them wi th a mild detergent and water.

NOTE: Make sure you thoroughly rinse and dry the tip s

before re-attaching them to the earbuds.

Ear bud Nozzle s

| Wipe 011ly with a dry, sort eoli an swab or equivale11l. CAUTI ON: NB ver insert any cleaning tool into the nozzle.
Chargin g Contacts (on earbuds)

Charging Pins (in chargi ng case)

|

To preve nt rusting for daily maintenance. wipe with alcohol. soft cotton swab or equiv alent and keep them dry.

Cha rging Caso| Wipe only with a dry, soft cotton swab or equiva lent.

“When you’re not using the earbuds, store them in the charging case. Close the charging case to help preserve battery life and keep the charging case free of debris

Dual CONNECT Earbud USING Mode THE BLUETOOTH MENU ON DEVICE

1. When take the both earbuds out of the charging case at the same time, the ear buds status I ights glow one second.
2. Please peel off the protective film for the earbuds before initial use
3. When you’re wearing the earbuds and hear the indic.1ted voice, you can connect the 8/111:l/0ulfi named (SLEEP] on your device.

Single Earbud Mode

1.  Either earbud can be used individually.
2. When take the earbud out of the charging case, the earbuds status lights glow
3. Please peel off the protective film for the earbuds before initial use.
4. When you’re wearing the earbuds and hear the indicated voice, you can connect the Bluetooth named [SLEEP) on your device.

RECONNECT A MOBILE DEVICE

When powered on, the e::.:irbuds lry to connect with the most recently- connected device.

ATTENTION
WITHOUT touch control function
Music Play Mode
Please adJUSt lhe volume, pause or play, previous or next track on your device.
Phone call modes
earbuds Call has Mode call function, you need to answer or reject the call on your device. When Battery the &tatu& earbuds are connecting with the device. the earbud battery status shows on power the display). Bfuetoot’1 symbol. (Depend on whether your device support the B/uerooth Recommend to use the Single Earbud Mode to ally check turn off each without earbud’s any indicated power. When notice. the (Made earbuds sure power sleep is free low, from it will interference) automatic

FCC  Statement

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
•  Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
•  Consult the dealer or an experienced radio/TV technician for help

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions (1)this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>