wedoking SM168-GX Bluetooth Sleep Headphones Instruction Manual

wedoking SM168-GX Bluetooth Sleep Headphones

OVERVIEW

ACCESSORIES CONTENTS

1. Eartips (sizes S and L)
   NOTE: Size M eartips and short caps are attached to the earbuds.

2. 2x L/S Short Earbud Caps

3. Type-C Cable

TRY ANOTHER EARTIP SIZE

Wear the earbuds for an extended period of time. If the eartips don’t feel comfortable or secure, or sound quality isn’t as expected, try another eartip size.
The size is marked on the bottom of each eartip with a small, medium, or large.
The size M eartips and caps come attached to the earbuds. If size M feels too loose try size S. If it feels too tight, try size L.
You may need to try all three eartip sizes or use a different size eartip for each ear.

CHANGE THE EARTIPS

1. Holding the earbud, gently stretch the eartip base and peel it away from the earbud.
   CAUTION: To prevent tearing, DO NOT pull on the top of the eartip.

2. Choose a new eartip size.

3. Align the earbud nozzle with the back of the eartip, and slide the earbud nozzle onto the eartip.

4. Gently stretch the eartip base around the nozzle. and press down until the eartip clicks securely into place.

5. Insert the earbuds and choose a new ear cap to press down.

6. Check the fit.

Tips:
The short ear caps are more comfortable to wear, and the long ear caps are more soundproof.

CHARGE THE EARBUDS

1. Align the charging contacts on the left earbud with the charging pins on the left side of the charging case.
2. Place the earbud in the charging case until it magnetically snaps into place.
3. Made sure the earbud status light glows according to the charging status.
4. Repeat steps 1 – 2 for the right earbud.

CHARGE THE CHARGING CASE
Please with the charging case closed, connect the USB cable to wall charger (not provided).
The charging case status lights glow according to the charging status.

Battery status
Shows the charging case battery level.

NOTE: When the case is charging, the last light blinks according to the current battery level. When it is fully charged, all four charging case status lights glow solid white.

POWER ON

Method

1. The earbuds power on when you take them out of the charging case.
   The earbud status lights glow till you hear “start up”

2. Take them out of the charging case and long press the touch area 2 seconds. The earbud status lights glow till you hear “start up”

POWER OFF

Method

1.  Place both earbuds in the charging case, the earbud status lights on according to the charging status.
2. Close the case, the earbuds keep charging and Bluetooth connection is off.

Method 2

1. When the earbuds are disconnected from the phone, tap the touch area 4 times continuously.
2. The earbuds lights glow 3 times then power off.
   Please note method 2 is not available when the earbuds is paired with the phone.
   Recommend use method to power on or off.
   NOTE: Make Sure to place both earbuds in the charging case until they magnetically snap into place, and the earbuds status lights display charge status.

CONNECT USING THE BLUETOOTH MENU ON DEVICE

Dual Earbud Mode

1. When take both earbuds out of the charging case at the same time, the earbuds status lights glow.
2. When one earbud light glows slowly and the other light stops lighting, both of them at beep at the same time.
3. Connect the Bluetooth named [SM168-GX] on your device.

Single Earbud Mode

1. Either earbud can be used individually.
2. When taking the earbud out of the charging case, the earbuds status lights glow.
3. Connect the Bluetooth named [SM168-GX] on your device.
   Please peel off the protective film for the earbuds before initial use.

RECONNECT A MOBILE DEVICE

When powered on, the earbuds try to connect with the most recently-connected device

NOTES:

• The device must be within range (33 ft or 10 m) and powered on.
• Make sure the Bluetooth feature is enabled on your mobile device.

Touch Function

• Music Play Mode
  • Tap 2 times Left/Right: PAUSE or PLAY
  • Tap 3 times Left: PREVIOUS TRACK
  • Tap 3 times Right: NEXT TRACK

Please adjust the volume on your device.

Phone Call Mode

• Tap 1 time Left/Right: ANSWER THE CALL
• Long Press 1 Second Left/Right: REJECT THE CALL
• When calling, tap the left/right earbud to hand up the phone.

Please adjust the volume on your device.

Battery Status
When the earbuds are connecting with the device, the earbud battery status shows on the Bluetooth symbol. Depend on whether your device supports the Bluetooth power display).

Recommend using the Single Earbud Mode to check each earbud’s power.
When the earbuds power is low, it will automatically turn off without any indicated notice. (Made sure sleep free from interference).

CLEAN THE EARBUDS AND CHARGING CASE

When you’re not using the earbuds, store them in the charging case. Close the charging case to help preserve battery life and keep the charging case free of debris.

WARNING:

• CHOKING HAZARD — Small parts. Not for children under 3 years.
  Please Let We Know If we can be of any assistance: 297284962@qg.com

FCC Statement

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions (1)this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>