wedoking True Wireless Bluetooth Headset SM168-GX User Guide

wedoking True Wireless Bluetooth Headset SM168-GX

Product Map

Charge

Before using the headset for the first time, please put it back into the charging box and close it. Use the charging cable attached in the packaging box lo connect the power supply for charging (please use a charger with rated output voltage of 5V and rated output current of 1Aor USB interface of computer to charge the device).
There are four lights in the middle of the charging box, the left is the charging indicator of the left earphone and the right is the charging indicator of the right earphone.
When the charging box has , 25% power, one LED light is on;
When the charging box has , 50% power, one LED light is on;
When the charging box has , 75% power, one LED light is on;
When the charging box has , 100% power, one LED light is on;
When the right headset is put into the charging box for charging, the white light of the headset is always on, the charging indicator of the right headset is always on, and the light goes out when it is fully charged;
When the left headset is put into the charging box for charging, the white light of the headset is always on, the charging indicator of the left headset is always on, and the light goes out when it is fully charged.

Headset Use

For a better experience, please wear the right and left ears properly. Please choose the earhook and earcap that are suitable for your ears. The factory headset has small earhook and medium earcap. Please replace them according to the following replacement method. After wearing correctly, the ear feels close, comfortable and stable.

1. First, align the headset with the round hole of the silicone earhook and install it.
   

2. Install the charging column step and silica gel square hole, and then straighten out the joint between silica gel and earphone.
   

3. Take the suitable earcap and install it into the earpiece slot.
   

NOTE: The steps of the charging column of the headset should be connected with the silica gel to ensure that the charging box placed at the back is well connected.

Power On

Method 1: Take the headset out of the charging box and turn it on. and with the prompt tone “power on”.

Method 2: when the headset is off, long press the multi-function touch key of the left and right headset for 2 seconds, the white light of the working indicator flashes quickly, and with the prompt lone” power on”

Shut down

Method 1: Put the headset back into the charging box, the charging headset will turn off automatically, and the while light of the headset is always on.
Method 2: When the headset is on, touch the multi-function key five times continuously, the white light of the working indicator flashes three times, and then turn it off.

Note: When the left and right headset are equipped, when the mobile phone is not connected, one of the headset will be turned off manually by touching the key five times continuously, and the other will also be turned off. But it won’t turn off at the same time after connecting the phone.

Connecting Smart Devices

Connecting Smart Devices in Dual Headset Mode

1. When using the headset for the first time, take out the headset from the charging box and turn it on automatically. The white light flashes for 1 second. The left and right headset enter the automatic pairing. After pairing, the white light of the main ear flashes slowly and the light of the auxiliary ear goes out (the left and right ears beep at the same time), indicating that they enter the pairing stale with the intelligent device;
2. Open the Bluetooth list of smart devices, search and connect the headset named “sm168-gx”. After pairing successfully, the left and right headset lights will not flash.

Connect Smart Devices in Single Headset Mode

When using a single ear, please take out the left or right headset from the charging box, and complete the connection with the smart device according to the above process of “connecting the smart device with dual headset mode”.

Auto Connect Back

1. Remove the headset from the charging box, and the headset will automatically connect back to the last smart device successfully connected.
2. When the headset and the smart device are disconnected beyond the effective distance, return to the effective distance within 3 minutes and automatically reconnect.

TWS Pairing of Left and Right Headsets

Original headsets, the left and right headphones have successfully completed TWS pairing, and there is no need to re pair under normal circumstances;
When you need lo pair again in case of pairing failure, please turn off the Bluetooth on your mobile phone, and then follow the steps below:

1. After power on, press the left and right headset three times at the same time, the headset enter the while light flash and start lo form a learn again for TWS pairing;
2. After TWS pairing, the white light of the main ear flashes slowly, and the light of the auxiliary ear goes out (the left and right ears beep at the same time), entering the pairing state with the intelligent device;

  * Complete the connection with the smart device according to the process of “connecting the smart device in dual Headset mode”.

Key Function Operation

Music Playing Mode

1. Double click the left/ right headset touch key to pause/ play
2. Four click the left headset touch key to play the next song
3. Three click the right headset touch key to increase the volume by one cell
4. Three click the left headset touch key to reduce the volume by one cell

Low Latency Game Mode

Operating when connected to a smart device

1. Four click the right headset multi-function touch key to enter the game mode, and the prompt tone is “game mode”
2. Click the right headset multi-function touch key again to switch back lo music mode, and the prompt lone is “music mode”
   
   Note: The original headset defaults to music mode

Call Mode

1. When a call comes, click the left ear or right headset multi-function touch key to answer the call. If you press for 1 second, you will be refused.
2. In the phone, click the left ear or right headset multi-function touch key lo hang up the phone and return lo the previous state.
3. During the call, the volume of the call can be adjusted through the mobile phone.

Switch Between Chinese and English

When the phone is not connected when the phone is on, click the left ear or right headset multi-function touch key lo switch between Chinese and English.

Battery Low Voltage Detection

1. When the battery voltage of the headset is reduced to 3.3V, the earphone will detect low voltage, and it will prompt “low power” every 5 minutes ;
2. When the battery voltage of the headset drops to 3.2V, the headset detects low voltage, and the headset will shut down automatically after 60 seconds.
   Note: when the headset detects low voltage, please charge the headset immediately to avoid affecting the battery life.

Reminder

To ensure your listening, please do not listen lo music at high volume for a long time, and do not let children or pets play with products, packaging and accessories, so as to avoid suffocation risk caused by misfeeding.

How to Deal With the Problem of Bluetooth Headset

According to the feed beck of customer service colleagues, this paper summarizes the most frequently asked questions of users, hoping to be helpful to you.
The influence of intermittent situation when listening to music with Bluetooth headset judge the customer factors, the matching program error between the mobile phone and the headset, the distance between the mobile phone and the headset, the player (network, mobile phone), the power of the mobile phone and the headset, end the reasons of the mobile phone system

1. If there is a problem with the connection audio, the media audio will be checked again and the phone will be restarted (Or restart the headset or mobile phone)
2. Try to use the mobile phone player to play local songs.
3. Full of headphones and mobile phone power, allowing customers to listen to local songs with their own mobile phone player.
4. ROM version problem of mobile phone system: due to the simplification and optimization of the system, the receiving signal of mobile phone is abnormal, so customers can try to change a mobile phone.

Bluetooth Headset can’t Listen to Music

1. Try to enter Bluetooth settings – connected (sm168-gx) and press the prompt to check whether the mobile phone audio and media audio have been checked. lf so, please check again and restart the mobile phone.

The Other Party Can’t Hear

1. Lei customers test whether they can hear their own voice with their own wechat audition. If you can hear the explanation that there is a problem with the connection of the headset, try reconnecting the mobile phone or re speaking the audio of the mobile phone. Tick✓ and re switch the Bluetooth of the mobile phone.
2. Try to reset the headset
3. Let’s ask if the customer uses the mobile phone of BOC.

The Headset Doesn’t Charge

1. After using the headset, if there is sweat or dirt on the surface of the headset, please use a clean and soft cloth to clean your headset, keep the surface of the headset clean for next use, and keep the charging column clean for better charging and melting.
2. Please wear the headset ear hook neatly to prevent bad connection caused by silicone top headset.
3. Check whether the charging box still has power. If there is no power, please plug it in.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>