Trackunit Spot 2 Installation Guide

: June 3, 2024
: Trackunit

Table of Contents

Spot 2
Help is here. Whenever and however you need it.b
Product Information
Overview
How to Install the Spot
Help is here, whenever you need it.
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Trackunit Spot 2
Installation Guide

Spot 2

Find the accessories you’re looking for.

Raw Shield Mount
Made to protect Raw in harsh environments, adding an extra layer of protection.
Trackunit Spot 2 - Fig RFID Card Reader
USB RFID card reader is an easy tool to activate DualID RFID card access for operators.

Ferrite
Designed and certified for use in Japan with TU-501 and TU600-x models.

Power Cable
Versatile solutions to connect Trackunit Raw to any type of machine. DualID Cards
The DualID RFID card is an easy way to control access to your equipment.

Splash Proof Relay
Used when required, to interface Trackunit Raw to specific machine wiring signals or controls.

Temperature Sensor
Connect to Raw to measure temperature conditions in your environment. Trackunit Spot 2 - Fig 6

Dublin II Bracket
Made to protect DualID II in harsh environments, adding an extra layer of protection.

Standard Relays
Used when required, to interface Trackunit Raw to specific machine wiring signals or controls.

Help is here. Whenever and however you need it.b

Help Center
Installation, activation, and onboarding info can be found at help center .trackunit.com Trackunit Spot 2 - Fig 9

Customer Success
Please reach out to our experienced support team at support@trackunit.com

Order
Already know what you need? Place your order at trackunit.com
Trackunit Spot
Empowering Non-Powered Equipment

One Platform Add attachments and unpowered equipment to the same platform. att
One View Track your equipment and achments alongside the rest of your fleet.
One Minute On-site installation takes only one minute.

Product Information

Trackunit Spot 2 - Trackunit Spot 3

Compatible With

Overview

Trackunit Spot is a battery-powered telematics solution that provides performance, durability, and flexibility to manage your fleet of non-powered assets, machines, or equipment.
Dimensions

Length: 121.6 mm (4.79”)
Width: 53.3 mm (2.10”)
Height: 32.2 mm (1.27”)
Weight: 150g (5.3 oz)

Tech Specs

Network: LTE-M1 / NB-IoT
Approvals: CE, FCC/IC, and PTCRB
GNSS: GPS, GLONASS, BeiDou, Gallieo, and QZSS
Battery: 3.6V / 2 x 3.6Ah
Capacity: 4000 pings
Temperature: – 30°C to + 60°C (- 22F to + 140F)
Environmental Class: IP66K, IP69K, and UL94-V0
3 Axis Accelerometer

Included

Spot
2x M4 (5/32”) Screws
User Guide

Installation

How to Install the Spot

Mounting Orientation
To get the most optimal performance out of the Spot:
Vertical Mounting
Mount the Spot upright with the Antenna facing the sky. The LED on the front will be on the bottom of the device.
Horizontal Mounting
Mount the Spot horizontally with the Antenna facing the sky. The LED on the front will be on the bottom of the device.
Mounting the Spot
Install the Spot by inserting the two M4 (5/32”) screws through the Mounting Holes and into the Mounting Surface. Use a TX20 (0.6 Nm) screwdriver to tighten the M4 crews; be careful not to overtighten.
Mounting Location
Avoid mounting the Spot under metal objects or next to electrical wiring.
Screw Mounting
• Mounting Hole: 4 mm (0.15”)
• Screw Type: M4 (5/32”) Screws
Activating the Spot
Remove the activation sticker from the front of the Spot and expose it to direct light to trigger device activation. Activate the Spot after installation or after the onboarding process.
Note: You need to activate the Spot before it transmits data.
Remove the activation sticker covering the light sensor.
The LED indicator on the front of the Spot will flash green, indicating the device is active.
Use Trackunit Manager to configure how often Spot transmits an updated location (default is one time per day)

Note: During the activation process, it can take up to 3 seconds for the LED Indicator on the Spot to start flashing.
Trackunit Spot
How to Use the Spot Trackunit Spot 2 -Spot

Meet Trackunit SPOT, a battery-powered telematics device that tracks your equipment. Trackunit Spot 2 -Spot 1 Track your equipment 1, 2, 3, or 4 times per day or even every second, the choice is yours
Turn on movement detection so you never have to worry about theft or unauthorized use.
Turn on the tracking feature, allowing you to follow and locate your equipment.