Maxax F71 Oklahoma 59 Inch Black Torchiere Floor Lamp with Crystal Shade Instruction Manual
- June 4, 2024
- Maxax
Table of Contents
Maxax F71 Oklahoma 59 Inch Black Torchiere Floor Lamp with Crystal Shade
Assembly & Installation Instructions
Dear Customer:
Thank you for your business!
If you have any questions or problems, please send us an email to
support@4modernhome.com or call us at
870-949 -8466. We will do everything possible to make you completely satisfied
with your purchase. Product reviews help future customers to make their
purchase decision. You are encouraged to share your experience by leaving a
short product review on the platform where you bought this product.
Thank you!
Zgear Team
Warning:
If any special control devices are used with this fixture, follow the
instructions carefully to assure full compliance with N.E.C. requirements. If
there are any questions, contact a qualified electrical contractor.
Warning:
California Residents Proposition 65 This product contains lead, a chemical
known to the state of California to cause cancer and birth defects or other
reproductive harm. Do not place the product in your mouth. Wash your hands
after handling this product.
Caution:
It is highly recommended to get an electrician to install this light. Please
make sure to turn the electricity off at the main circuit breaker before
beginning installation. All glass is fragile. Use care when handling glass
component(s) and/or lamp(s)
OVERVIEW
PARTS INCLUDED
| A | Base | 1 |
|---|---|---|
| B | Tube | 1 |
| C | Tube | 1 |
| D | Tube | 1 |
| E | Lamp socket | 1 |
| F | Shade | 1 |
| G | Locking ring | 1 |
ASSEMBLY
- Unpack all parts from cartons carefully.
- Carefully pull-out excess power cord from the lamp base while assembling to prevent the cord from becoming twisted.
- Tighten the tube(B)into the base(A)until tight.
- Tighten the tube(C)into the tube(B)until tight.
- Tighten the tube(D)into the tube(C)until tight.
- Tighten the lamp socket(E)into the tube(D) until tight.
- Tighten the shade(F)onto the lamp socket(E) until tight.
- Tighten the locking ring(G)into the lamp socket(H)until tight.
WIRE CONNECTION DIAGRAM
Wires meeting safety standards are required to connect the electrical circuit
CAUTION: Risk of fire
Please read all instructions carefully. Before you proceed to install make
sure that the power supply is turned off and remains off until installation is
completed.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>