Maxax T124 Bedside Natural Rattan Table Lamp Set Instruction Manual
- October 30, 2023
- Maxax
Table of Contents
Maxax T124 Bedside Natural Rattan Table Lamp Set
Information
Dear Customer
Thank you for your business!
If you have any questions or problem, please send us an email to
support@4modernhome.com or call us at
870-949-8466. We will do everything possible to make you completely satisfied
with your purchase. Product reviews help future customers to make their
purchase decision. You are encouraged to share your experience by leaving a
short product review on the platform where you bought this product.
Thank you!
Zgear Team
Warning: If any special control devices are used with this fixture, follow the instructions carefully to assure full compliance with N.E.C. requirements If there are any questions, contact a qualified electric contractor.
Warning: California Residents Proposition 65. This product contains lead, a chemical known to the state of California to cause cancer and birth defects or other reproductive harm. Do not place the product in your mouth. Wash your hands after handling this product.
Caution: It is highly recommended to get an electrician to install this light. Please make sure to turn the electricity off at the main circuit breaker before beginning installation. All glass is fragile. Use care when handling glass components) and/or lamp(s)
Using Instructions
- Unpack all parts from cartons carefully.
- Carefully pull-out excess power cord from the lamp base while assembling to prevent the cord from becoming twisted.
- Tighten the lamp socket(B)into the body(A)until tight.
- Place the harp(D)onto the saddle(C).
- Place the shade(E)onto the harp(D).
- Tighten the finial(F)into the harp(D)until tight.
WIRE CONNECTION DIAGRAM
- Wires meeting safety standards are required to connect the electical circuit
CAUTION: Risk of fire.
PARTS INCLUDED
ASSEMBLY INSTRUCTIONS
STEPS TO ASSEMBLE THE LAMPSHADE
- Take out the lampshade and 2 wrought iron frames.
- Unfold the fabric lampshade
- Fix the two frames with velcro along the edge of the lampshade
- Mount the harp and install the bulb (Not included)
- Tighten the finial to secure the lampshade
MADE IN CHINA
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>