Maxax MX19169-4BG-P Hartford 4-Light Black-Gold Small Chandelier Instruction Manual
- October 30, 2023
- Maxax
Table of Contents
Maxax MX19169-4BG-P Hartford 4-Light Black-Gold Small Chandelier
Instruction Manual
Dear Customer:
Thank you for your business!
If you have any questions or problems, please send us an email to
support@4modernhome.com or call us at
469-312-6428. We will do everything possible to make you completely satisfied
with your purchase.
Product reviews help future customers to make their purchase decision. You are
encouraged to share your experience by leaving a short product review on the
platform where you bought this product.
Thank you!
Zgear Team
Assembly & Installation Instructions
Warning: If any special control devices are used with this fixture, follow the instructions carefully to assure full compliance with N.E.C.requirements. If there are any questions, contact a qualified electric contractor.
Warning: California Residents Proposition 65 This product contains lead, a chemical known to the state of California to cause cancer and birth defects or other reproductive harm. Do not place the product in your mouth. Wash your hands after handling this product.
Caution: It is highly recommended to get an electrician to install this
light. Please make sure to turn the electricity off at the main circuit
breaker before beginning installation. All glass is fragile.Use care when
handling glass component(s)and/or lamp(s)
Step 2
2A. Lock the crossbar to the junction box of the ceiling by using 2 pcs
of 5/32 screws in the accessories bag.
2B. Connect the wires. The hot/positive (+) wire is the one which has
writing on it. The negative (-) wire is the one which has no writing.
2C. Cover the celing canopy and attach the screws to the canopy
( Rated 110-130V/60Hz, bulb 60W maximum.)
- Light Bulb (Not included)
WIRE CONNECTION DIAGRAM
Wires meeting safety standards are required toconnect the electrical circuit.
CAUTION: Risk of fire
Please read all instructions carefully. Before youproceed to install, make sure that the power supplyis turned off and remains off until installation iscompleted.
PARTS INCLUDED
| Code | Part Description | QTY |
|---|---|---|
| A | Mounting Bracket | 1 PCS |
| B | Mounting Screw | 2 PCS |
| C | Canopy | 1 PCS |
| D | Slings Chain | 1 PCS |
| E | Lifting Ring | 1 PCS |
| F | Chandelier Body | 1 PCS |
| G | Connector | 1 PCS |
| H | Sling Rod | 1 PCS |
| I | Lamp Holder Group | 4 PCS |
| J | Lamp Plate | 1 PCS |
| K | Decorative Nut | 1 PCS |
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>