JBC HT470K Heavy Duty Tweezers Kit Instruction Manual
- June 4, 2024
- JBC
Table of Contents
www.jbctools.com
INSTRUCTION MANUAL
HT470K
Heavy Duty Tweezers Kit
This manual corresponds to the following reference: KHT470A
The following items are included:
Packing List
Features
HT470-A Changing cartridges
| 
---|---
1. Unlocking
Unlock the fixing screws.| 2. Removing
Place the cartridges in the extractor and pullthe tweezers to remove them.
| 
3. Inserting
Use the grooves to insert the cartridges as far as the mark*.| 4. Locking
Lock the fixing screws.
*Important
It is essential to insert the cartridges as far as the mark for a proper
connection.
Adjustable Stand
Maintenance
Before carrying out maintenance or storage, always unplug the stand from the station and the tool.
- Use a damp cloth to clean the stand. Alcohol can be used only when cleaning the metal parts.
- Check periodically that the metal parts of the tool/stand are clean so that the station can check the tool’s status.
- Periodically check all cables and tube connections.
- Replace any defective or damaged parts. Use original JBC spare parts only.
- Repairs should only be performed by a JBC-authorized technical service.
Safety
It is imperative to follow safety guidelines to prevent electric shock, injury, fire, or explosion.
-
Do not use the stand for any other purpose than soldering or rework.
-
The power cord must be plugged into approved bases. Be sure that it is properly grounded before use. When unplugging it, hold the plug, not the wire.
-
The tool should be placed in the stand when not in use in order to activate the sleep mode.
The soldering tip, the metal part of the tool and the stand may still be hot even when the station is turned off. Handle with care, including when adjusting the stand position. -
Avoid the contact of flux with skin or eyes to prevent irritation.
-
Be careful with the fumes produced when soldering.
-
Keep your workplace clean and tidy. Wear appropriate protection glasses and gloves when working to avoid personal harm.
-
Utmost care must be taken with liquid tin waste which can cause burns.
-
This appliance can be used by children over the age of eight and also persons with reduced physical, sensory or mental capabilities or lack of experience provided that they have been given adequate supervision or instruction concerning the use of the appliance and understand the hazards involved. Children must not play with the appliance.
-
Maintenance must not be carried out by children unless supervised. 80 mm 60 mm 50 mm 40 mm
Specifications
HT470K
Heavy Duty Tweezers Kit Ref. KHT470A
Ref. HDT-SE
– Includes| Sleep Mode, Hibernation Mode
---|---
Ref.: HT470-A
– Cable Lenght:| 1.3 m
– Total Net Weight:| 1.67 kg / 3.68 lb
– Total Package Dimension / Weight| : 440 x 210 x 220 / 2.51 kg
(L x H x W)| 17.32 x 8.27 x 8.66 / 5.53 lb
Complies with CE standards ESD safe
Warranty
JBC’s 2-year warranty covers this equipment against all manufacturing defects,
including the replacement of defective parts and labor.
The warranty does not cover product wear or misuse.
In order for the warranty to be valid, equipment must be returned, postage
paid, to the dealer where it was purchased.
Get 1 extra year of JBC warranty by registering here:
https://www.jbctools.com/productregistration/ within 30 days of purchase.
This product should not be thrown in the garbage.
In accordance with the European directive 2012/19/EU, electronic equipment at
the end of its life must be collected and returned to an authorized recycling
facility. a manuales – color gris