HAVIT Lighting HV5522T-BLK Polly + Gleam Recessed LED Downlight Instruction Manual
- June 4, 2024
- Havit Lighting
Table of Contents
Lighting HV5522T-BLK Polly + Gleam Recessed LED Downlight
Instruction Manual
Product Specification
Model No.| HVSS22T-BLK| HVSS22T-WHT| HV5528T-BLK|
HV5528T-WHT| I HVSS28D2W-BLK| I HVSS28D2W-WHT
---|---|---|---|---|---|---
Name| Polly| Gleam
Material| Polycarbonate| Polycarbonate Face with Aluminium Body
Colour| Black| White| Black| I White| I Black| I White
Cut Out| 90mm| 90mm
IC Rating| IC-4| IC-4
IP Rating| IP54 – Front of fitting only| IP54 – Front of fitting only
Input Voltage| 240v AC| 240v AC
Protection Class| 2 (No Earth Required)| 2 (No Earth Required)
Lamp Base| Built-in LED| Built-in LED
Lamp Wattage| lx 8w| lx 9w
Colour Temp| TRI Colour – 3000k, 4000k, 5500k| TRI Colour – 3000k, 4000k,
5500k| Dim to Warm
Lumens| 6351m,9131m,841Im| 680lm, 7951m, 7451m| 6851m
CRI| > 80| > 80
Dimmable| Yes – Triac Dimmable| Yes – Triac Dimmable
Warranty| 3 Years Replacement| 3 Years Replacement*
Dimensions
| HV5822 Dimension | HV5822 Dimension |
|---|---|
| HV5522 Installation Daigram | HV5522 Installation Daigram |
Important Safety Issues:
- A qualified electrician must install this product according to AS/NZS 3000.
- Ensure all electrical mains are disconnected before any installation.
- Modification of this product will void any warranty.
- Havit Lighting does not take responsibility for wrong installation, incorrect use, or use of installation material that does not belong to the system.
- All 316 stainless steel fittings must have regular cleaning maintenance to prevent any tea staining on the fitting. (Warranty does not cover Tea Staining) Only LED
- The fitting can be installed under insulation, LED Driver must not be covered to allow for ventilation.
- This fixture must not be installed with loose fill insulation such as macerated paper and wool. LED driver must be mounted above any insulation covering the fixture.
- These instructions may be updated at any time due to product improvements. Please visit the website for the most current installation instructions.
Steps for Installation:
- Make sure that the electrical circuit is free of voltage (master switch off)
- Cut out the hole using the dimensions in the table above making sure each hole is not under joists or
- Fitting is provided with flex and plug, Plug cable into plug base installed earlier.
- For TRI Colour Models, Fitting is preset to 3000k, to change the slide switch on the back of fitting to desired color temperature.
- Pull back springs on fitting and insert into
- Once the fitting is in the hole, release clips, These springs will hold the fitting in
- All connections must be carried out carefully, inspect all contacts before switching back on the electric circuit.
Must be installed by a licensed electrician
Contact Details:
143 Beauchamp Road Matraville NSW 2036 Australia
Tel: 02 9381 8300 Fax: 02 9666 8881 Email:
sales@havit.com.au Web:
www.havit.com.au
**Warranty Terms & Conditions***
https://havit.com.au/pages/warranty-terms-and-conditions
Additional Information
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>