EGLO 205306A TARBES wall light Instructions

June 4, 2024
EGLO

EGLO 205306A TARBES wall light

SAFETY PRECAUTIONS

  1. Turn off electrical power at the breaker panel before starting the installation of light fixture (see fig. A)
  2. This product must be installed in accordance with the applicable installation code by a person familiar with the construction and operation of the product and the hazards involved.

NOTE: product may not look exactly as shown in figures.EGLO-205306A-
TARBES-wall-light-fig-1

INSTRUCTIONS

EGLO-205306A-TARBES-wall-light-fig-2

If the fixture doesn’t light, check the switch on fixture to make sure it is turned on. If installing on the ceiling using a wall switch, make sure the switch on fixture is left in on position.

Installations

EGLO-205306A-TARBES-wall-light-fig-3 EGLO-
205306A-TARBES-wall-light-fig-4

If the fixture doesn’t light, check the switch on fixture to make sure it is turned on. If installing on the ceiling using a wall switch, make the sure switch on fixture is left in on position.

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals