tommee tippee 0549402 Insulated Flip Top Sportee Instruction Manual

: June 9, 2024
: Tommee Tippee

Table of Contents

tommee tippee 0549402 Insulated Flip Top Sportee
SAFETY GUIDANCE
STORAGE AND USE
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

tommee tippee 0549402 Insulated Flip Top Sportee

Please read and keep these instructions

SAFETY GUIDANCE

For your child’s safety and health WARNING!

Always use this product with adult supervision. Accidents have occurred when babies have been left alone with drinking equipment due to the baby falling or if the product has disassembled.
Never use feeding spouts or straws as a paciﬁer.
Continuous and prolonged sucking of ﬂuids will cause tooth decay. Tooth decay in young children can occur even when non-sweetened ﬂuids are used. This can occur if the baby is allowed to use the cup for long periods through the day and particularly through the night, when saliva ﬂow is reduced or if it is used as a paciﬁer.
Always check food temperature before feeding.
Always stir heated food to ensure even heat distribution and test the temperature before serving.
Throw away at the ﬁrst signs of damage or weakness.
Keep all components not in use out of the reach of children.
Never attach to cords, ribbons, laces or loose parts of clothing. The child can be strangled.
To avoid scalding, do not use the cup with hot liquid.
• Do not use the cup or any part of the cup as a toy.

STORAGE AND USE

Inspect before each use.
Do not store or leave in direct sunlight or near a source of heat.
Do not store with or allow to come into contact with solvents or harsh chemicals.
Not suitable for use in a conventional oven, a combination microwave oven or any other heating device.
Not suitable for microwave use. See cleaning and sterilization instructions.
As with most sippy cups, ours are to be used with milk, water or juices that don’t contain pulp.
DO NOT use with ﬁzzy (carbonated) beverages, formula or hot liquids.

INSTRUCTIONS FOR CLEANING
Before ﬁrst use, disassemble and thoroughly clean. This is to ensure hygiene. Before each and every use clean carefully. Always wash the product immediately after use.

Unscrew the lid and open the ﬂip cap to expose the spout (A).
Remove the straw (D).
Use your thumb to push out the hard valve from under the lid.
Pinch the base of the spout either side and push through the lid to remove.
Wash all parts thoroughly in warm soapy water and rinse in clean water. To prevent damage, avoid using a brush on the soft part of the valve.
- Do not clean with solvents or harsh chemicals.
- All parts can be washed in the dishwasher (top shelf only).
- Do not allow product to come into contact with oil based food (e.g. oil/tomato based sauces) as staining will occur.
- Our insulated cups are suitable for sterilization by cold water tablet/liquid solution only.
  INSTRUCTIONS FOR REASSEMBLING YOUR CUP
  Please follow these important instructions. Always shake parts after washing to remove excess water and leave to air dry before reassembling. Your cup could leak or be difficult to drink from if not assembled correctly as follows:
Align the silicone spout (A) and the hard valve (C), press together. Ensure part B of the soft side is fully pushed through the hole of the hard side (C). This is essential to make sure the valve functions correctly.
&b. Install the silicone spout (A) with the hard valve (C) from under the lid, pull the spout (A) until it clicks and push the hard valve (C) ﬁrmly until the three prongs lock into place.
Reassemble the hard straw (D) by pushing ﬁrmly into the hard valve (C).
Screw on lid.
If the sleeve is removed for cleaning, ensure the arrow on the sleeve is pointing upwards when reassembling.