ZYXEL NWA90AX 802.11ax Dual-Radio PoE Access Point User Guide
- June 4, 2024
- ZYXEL
Table of Contents
NWA90AX 802.11ax Dual-Radio PoE Access Point
User Guide
**Quick Start Guide
**
Video tutorials
How to Configure NWA90AX Access Point with Nebula
APP
How to Configure NWA90AX Access Point with Nebula – Web Version
How to Configure Zyxel Access Point with Local Web Interface
Hardware Installation
Connect the UPLINK port to a router with Internet access. If you are not using PoE, connect the Zyxel Device power socket to an appropriate power source.
Option 1 A Nebula Registration with the App
Use the Zyxel Nebula Mobile app to register the Zyxel Device to the NCC using
the QR code.
Where to find QR code:
Download and open the Zyxel Nebula Mobile app. Log in with your Zyxel account.
Create an organization and site or select an existing site. Scan the Zyxel
Device’s QR code to add it to the site. (You can find the QR code in its web
configurator or on a label on the device or its box.)
Note: The Zyxel Device will go into cloud management mode automatically
after it is registered to a site.
Option 1 B Nebula Registration with the Web
Use the Zyxel Nebula portal to register the Zyxel Device to the NCC using the
MAC address and serial number.
Follow the steps below to manage the Zyxel Device through the Zyxel cloud-
based network management system.
Note: Make sure the connected router has Internet access.
-
Go to the Zyxel Nebula Control Center (NCC) website (https://nebula.zyxel.com). Click Get Started to sign up for my Zyxel account and log in.
-
Create an organization and a site (network) in the NCC.
-
Enter the Zyxel Device’s LAN MAC address and serial number (S/N) (see the label on the device) in the NCC configuration screen.
Note: The Zyxel Device will go into cloud management mode automatically after it is registered to a site. See the NCC User’s Guide for more information about configuring the Zyxel Device through the NCC.
Option 2 Direct Management
Use the web configurator to directly manage the Zyxel Device.
1-a WiFi connection
http://1.1.1.1orsetup.zxyel.com (First-time configuration only)|
---|---
User Name: admin Login Password:1234 (default)
I C) From a WiFi-enabled computer, search for the Zyxel Device’s default WiFi
network name (Zyxel-XXXX, where XXXX is the last four characters of the MAC
address) and connect to it.
Open your web browser and enter “http://1.1.1.1(setup.zyxel.com)” for
initial configuration. Enter the default user name (admin) and password
(1234). Click Login.
Note: If the Zyxel Device cannot connect to the Internet, use the DHCP-
assigned IP address of the Zyxel Device to access its web configurator. Check
the connected router or DHCP server for the IP address of the Zyxel Device.
1-b Wired connection
http://192.168.1.2|
---|---
User Name: admin Login Password:1234 (default)
(1-b) Use an Ethernet cable to connect your computer to the UPLINK port of
the Zyxel Device through a PoE injector or PoE switch.
Use its DHCP-assigned IP or default static IP address littp://192.168.1.2N
to access the web configurator. Make sure your computer IP address is in the
same subnet as the Zyxel Devices.
2. The wizard appears automatically.
Use the wizard to set up your Zyxel Device.
Note: It takes 1 to 2 minutes to apply your wizard changes. The LED turns
steady blue if you change the Zyxel Device default settings and the WiFi is
on.
3. Use the Zyxel Device’s new wireless settings (SSID and key) to re-connect
to the Zyxel Device’s WiFi network for Internet access if you change them in
the wizard (or log in to the web configurator when the Zyxel Device is using a
WiFi connection). The LED turns steady green when WiFi clients connect to the
Zyxel Device.
Note : 1.11.1 (setup.zyxel.com) is for initial setup only. It is not
usable after the Zyxel Device is configured.
Note : Check the Dashboard screen and note down the Zyxel Device’s IP
address in case you need to access its web configurator again.
Wall / Ceiling Mounting
The mounting kit is for wall or ceiling mounting. You need to choose how you
want to mount your Zyxel Device first.
1-a Wall mounting: Drill two holes for the screw anchors (A), 62.4 mm
apart. Insert the screw anchors into the wall.
1-b Ceiling mounting: Drill two holes for the screw anchors (A), 62.4 mm
or 701 mm apart. Insert the screw anchors into the ceiling.
2. Install two mounting screws through
the holes on the bracket (B) into the plugs/anchors to secure the bracket to
the wall/ceiling. Make sure the screws are snugly and securely fastened to the
wall/ceiling.
3. After the bracket is attached to the wall/ceiling, slide the Zyxel Device
onto the bracket until it clicks into place.
T-bar Ceiling Mounting
Clips (ACCESSORY-ZZ0105F) are sold separately.
- Attach two clips to the ceiling grids as shown.
- Install two screws to secure the bracket to the clips.
- Slide the Zyxel Device onto the bracket until it clicks into place.
Note: Clips (ACCESSORY-ZZO105F) are sold separately.
Desk Mounting
- Remove the adhesive backing from the rubber pad.
- Align and attach the rubber pad to the gray square to stabilize the Zyxel Device.
- Place the Zyxel Device on the desk.
Support Information
EU https://support.zvxeL.eu
EU, Russia https://supoort.zvxel.eu
Taiwan
+ 886 2 2739 9889
retail@zyxel.com.tw
USA
+1 800 255 4101
support@zyxel.com
See the User’s Guide at www.zyxel.com for more
information, including customer support and safety warnings.
EU Importer
Zyxel Communications A/S Gladsaxevej 378, 2. th. 2860 Soborg, Denmark
https://www.zyxel.com/dk/da/
UK Importer
Zyxel Communications UK Ltd. 2 Old Row Court, Rose Street, Wokingham, RG40
1XZ, United Kingdom (UK) https://www.zyxel.com/uk/en/
US Importer
Zyxel Communications, Inc 1130 North Miller Street Anaheim, CA 92806-2001
https://www.zyxel.com/us/en/
Copyright © 2022 Zyxel and/or its affiliates. Al l Rights Reserved.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>