QAZQA Baleno WL 2 AR70 Lux Modern Wall Lamp Instruction Manual

June 1, 2024
QAZQA

QAZQA Baleno WL 2 AR70 Lux Modern Wall Lamp

Product Information

  • Specifications:
    • Input: 220-240V~
    • Frequency: 50Hz
    • Max. Wattage: 2x35W
    • IP Rating: IP44
    • Model: Baleno WL 2 AR70 Lux
    • Overall Sizes:
    • Width: 83mm
    • Length: 210mm
    • Height: 92mm

Product Usage Instructions

  • Ensure the input voltage is within the range of 220-240V~.
  • Mount the light fixture securely in a suitable location.
  • Connect the appropriate electrical wiring following standard procedures.
  • To turn the light on, switch it to the “ON” position.
  • To turn the light off, switch it to the “OFF” position.
  • Regularly clean the fixture to maintain optimal performance.

FAQs

  • Q: What is the maximum wattage supported by this light fixture?
    • A: The maximum wattage supported is 2x35W.
  • Q: What is the IP rating of this light fixture?
    • A: The IP rating of this light fixture is IP44, indicating protection against solid objects larger than 1mm and water splashes from any direction.
  • Q: Where can I find more information about the manufacturer and support?
    • A: You can visit the official websites of FittinQ B.V. and FittinQ LTD for more details and support.

Safety Precautions

QAZQA-Baleno-WL-2-AR70-Lux-Modern-Wall-Lamp-FIG-1
\(16\)

INSTALLATION INSTRUCTION

  • Baleno WL 2 AR70 Lux 104091 / 104092 / 107550

QAZQA-Baleno-WL-2-AR70-Lux-Modern-Wall-Lamp-FIG-1
\(1\) QAZQA-Baleno-WL-2-AR70-Lux-Modern-Wall-
Lamp-FIG-1 \(2\)

DIMENSION

Overall Sizes:

  • Important: The product must be installed by a qualified electrician
  • Automatic: Fitting will operate on and off automatically at dusk and dawn.
  • Time Delay: Fitting incorporates a time delay to prevent accidental trigger operation by car headlights and flashes. Pre-set 15-30sec delay to avoid false trigger (approx.).
  • Ambient Light: 5 ~45Lumen (approx.). Avoid a position where direct light from another source can fall on the control. Position out of direct sunlight if possible (not essential).

SAFETY INSTRUCTION

Please study the instruction manual and the below information carefully before installing or using this product. Please keep this user manual for further reference

  1. The luminaires may only be installed by authorized and qualified technicians according to the valid regulations for electrical installation.
  2. Maintenance of the luminaires is limited to their surfaces. During maintenance, no moisture can come into contact with any areas of the terminal connections or voltage control parts.
  3. The electrical supply must be switched off at the outset, preferably using a switch in the distribution
  4. box, before any installation, maintenance, or repair work is undertaken. Exterior lighting must not be installed during rain.
  5. Take account of the minimal separation distance from other objects and the room required around the fitting.
  6. If in any doubt, consult a professional, taking local installation requirements into account. Some countries stipulate that lighting may be installed only by registered installers.
  7. Clamping screws in electrical connections must be adequately tightened. This is particularly the case with 12V low-voltage conductors.
  8. Clean with a clean, dry cloth or brush, use no solvents or abrasives. Avoid dampness on all electrical components
  9. Take account of all available technical information.
  10. Meaning of symbols:
    • This icon indicates the level of water-proof and dust-proof
    • Protection Class I: the fitting must be earthed
    • Protection Class Il: the fitting is doubled insulated and does not require earthing
    • Protection Class Ill: the fitting is low-voltage
    • Minimum distance from lighted objects (meters)
    • The type of lamp and maximum size and wattage indicated in each lighting unit must not be exceeded; different items require different kinds of light sources with different bulb icons
    • The armature is designed to work only with the indicated voltage. Different items require different working voltages.
    • The luminaire can be used in combination with a dimmer
    • The luminaire can be dimmed by a wall switch
    • The reference light angle and light space of the luminaire
    • This luminaire cannot be disposed of together with normal domestic waste in a standard rubbish can, but you have to bring it to a staging area for electrical waste.
  11. Take note of the symbols when connecting wires:

CONTACT

  • FittinQ B.V.
  • Smaragdweg 52, 5527 LB Hapert,
  • The Netherlands
  • www.qazqa.nl.
  • FittinQ LTD
  • 55 Baker Street,
  • London, WIU 7EU
  • United Kingdom

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

QAZQA User Manuals

Related Manuals