EMERSON 52M GO Switch Proximity Sensor Instructions

: June 4, 2024
: Emerson

Table of Contents

Wiring Configurations
EU Declaration of Conformity
Documents / Resources

EMERSON 52M GO Switch Proximity Sensor

Wiring Configurations

GO™ Switches operate on the principle of magnetic attraction, reacting to ferrous metal or magnetic targets as they come within the switch’s sensing range.

Although switches vary in design according to their intended applications, all GO™ Switches use permanent magnets which, when actuated by the presence of a ferrous or magnetic target, change the state of electrical contacts.

Sensing distance is the maximum distance between the switch and target when the switch first operates; the trip point. The differential, also known as deadband or hysteresis, is the distance that the target must move from the sensing area in order to allow the switch to reset.

Electrical Ratings:
DC = 2A@24V
AC = 2A@120V

Differential:
0.3mm Approx

Target material:
Ferrous metal
Optional Target Magnets

For optimum performance, provide sufficient mass of target, and choose the appropriate GO™ Switch model to match the application requirements for operating frequency, type of load, etc.
Greater target mass and target movement fully into and out of sensing range will increase contactpressure. This is helpful in low current controls applications
GO Switch 52M can be mounted in a flush or NonFlush configuration Target MUST cover at least 75% of sensing face

Max torque on threads:
35 in-lbs

Once the switch is set, and the target travels to the same position every time (within .002”), the GO™ Switch will maintain calibration for life. Set it and forget it!

All GO™ Switches are “pure” contact switches, meaning they have no voltage drop when closed, nor do they have any leakage current when open.

If a voltage drop is detected (greater then 10%) then the contacts have reached end of life and the switch needs to be replaced

EU Declaration of Conformity

The products described herein, conform to the provisions of the following Union Directives, including the latest amendments:
Low Voltage Directive (2014/35/EU) EMD Directive (2014/30/EU)

Visit www.topworx.com for comprehensive information on our company, capabilities, and products – including model numbers, data sheets, specifications, dimensions, and certifications.

info.topworx@emerson.com | www.topworx.com

GLOBAL SUPPORT OFFICES

Americas
3300 Fern Valley Road
Louisville, Kentucky 40213 USA
+1 502 969 8000
Europe
Horsfield Way
Bredbury Industrial Estate Stockport
SK6 2SU
United Kingdom
+44 0 161 406 5155
info.topworx@emerson.com

Africa
24 Angus Crescent
Longmeadow Business Estate East
Modderfontein
Gauteng
South Africa
27 011 441 3700
info.topworx@emerson.com

Middle East
P.O. Box 17033
Jebel Ali Free Zone
Dubai 17033
United Arab Emirates
971 4 811 8283
info.topworx@emerson.com

Asia-Pacific
1 Pandan Crescent
Singapore 128461
+65 6891 7550
info.topworx@emerson.com

© 2013-2016 TopWorx, All rights reserved. TopWorx™, and GO™ Switch are all trademarks of TopWorx™. The Emerson logo is a trademark and a service mark of Emerson Electric. Co.
© 2013-2016 Emerson Electric Company. All other marks are the property of their respective owners. Information herein – including product specifications – is subject to change without notice.