SFAIH SFMA0021AW White Liquid Chalk Markers Instructions
- June 1, 2024
- SFAIH
Table of Contents
Valve Action Markers
Instructions
SFMA0021AW White Liquid Chalk Markers
Step1 Point the pen tip upward, shake vertically with cap on
– It is best to shake it until you can clearly hear the crisp sound
of the collision between steel ball and plastic parts inside. Avoid using it
without shaking it thoroughly, which may cause color discrepancies.
Step2 Open the pen cap, press the pen tip 2-3 times with the pen
tip upward to fully exhaust the air inside
– If the air in the pen is not completely exhausted, it may cause
ink sprays or leakage.
Step3 Gently press the tip down 2-3 times on the chosen surface,
wait a few seconds until the tip is filled with paint
– Avoid pressing the tip continuously to cause ink accumulation or overflow.
Step4 Cover the cap after use
– If the cap is not capped properly, the ink on the outside of the
valve may solidify and become unusable.
Tips If there is too little ink or no ink comes out during subsequent use,
repeat step 3
How to use valve action markers
Documents / Resources
|
SFAIH SFMA0021AW White Liquid Chalk
Markers
[pdf] Instructions
SFMA0021AW White Liquid Chalk Markers, SFMA0021AW, White Liquid Chalk Markers,
Liquid Chalk Markers, Chalk Markers, Markers
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>