OPTONICA 5723 LED SMD Floodlight Black Body IP65 Instructions
- June 4, 2024
- OPTONICA
Table of Contents
OPTONICA 5723 LED SMD Floodlight Black Body IP65 Instructions
Please take time to read this leaflet carefully and retain it for future reference.
Diagram:
Important Safety Information
- Do not wire this lantern into the lighting circuit – use a switched fuse spur.
- Before installation and servicing, disconnect the electrical supply at the mains.
- Carefully observe all instructions or warnings that are labelled on, or supplied with, your product.
- This product is suitable for outdoor use. If in any doubt, consult a qualified electrician.
Fixing instructions
- Do not wire this lantern into the lighting circuit – use a switched fuse spur.
- This fitting must be earthed. contact a qualified electrician to install a suitable earth facility.
- Ensure the electricity is turned off at the mains before installing or maintaining any electrical fitting
- Please note: For new installations, check for any electrical cables or pipe work (gas/water) in the nvicinity of the intended mounting point for this product, before proceeding with the installation
General Information
Do not mount ceiling/wall fittings onto damp surfaces such as newly painted or
plastered areas
as this may cause discolouration of the finish
Tools which may be required:
- Dril
- Cross Head Screwdriver
- Small Electrical Slotted Screwdriver
- Insulation Tape
Installation
This product should be disposed of responsibly at the end of its life. Please
recycle
where facilities exist. Check with your Local Authority or retailer for
recycling advice
(Waste Electrical and Electronic Equipment Directive)
IMPORTER: Prima Group 2004 LTD, Bulgaria, 1784 Sofia, Miadost 1, bl. 144,
Ground Floor;
Phone: +359 2 988 45 72;
Read More About This Manual & Download PDF:
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>