PHILIPS BRP130 Smart Bright Road LED Lighting Instruction Manual

June 4, 2024
Philips

PHILIPS-logo

PHILIPS BRP130 Smart Bright Road LED Lighting

Mounting Instruction

Type

|

LEDs

|

Power/W

|

CCT/K

|

*Light Source Energy Efficiency Class

|

Maximum Number of Luminaire on MCB 16A Type B

|

Inrush Current

|

Voltage

---|---|---|---|---|---|---|---
BRP130 LED88/WW 70W 220-240V DM GM| 82| 70| 3000|

D

|

50

|

15A/1.5μs

|

220-240~

50/60Hz

BRP130 LED88/NW 70W 220-240V DM GM| 82| 70| 4000
BRP130 LED88/CW 70W 220-240V DM GM| 82| 70| 5700
BRP131 LED125/WW 100W 220-240V DM GM| 112| 100| 3000|

D

|

35

|

15A/1.5μs

BRP131 LED125/NW 100W 220-240V DM GM| 112| 100| 4000
BRP131 LED125/CW 100W 220-240V DM GM| 112| 100| 5700
BRP132 LED175/WW 140W 220-240V DM GM| 154| 140| 3000|

D

|

25

|

15A/1.5μs

BRP132 LED175/NW 140W 220-240V DM GM| 154| 140| 4000
BRP132 LED175/CW 140W 220-240V DM GM| 154| 140| 5700

This product contains a light source of energy efficiency class: see table

PHILIPS-BRP130-Smart-Bright-Road-LED-Lighting-fig-1

Type Weight(kg) L×W×H(mm) Wind force area(m²)
BRP130 2.6 382.5×248.4×85 0.08
BRP131 3.2 453.8×277.2×85 0.11
BRP132 4 508.2×325.5×85 0.14
  1. Connect the power cord PHILIPS-BRP130-Smart-Bright-Road-LED-Lighting-fig-2
  2. Pole mountingPHILIPS-BRP130-Smart-Bright-Road-LED-Lighting-fig-3
  3. Anti-drop stainless steel rope and locknut for luminaire
  4. Surge production device (SPD) replacementPHILIPS-BRP130-Smart-Bright-Road-LED-Lighting-fig-5

Warning

  1. The luminaire shall be installed by a qualified electrician and wired in accordance with the latest IEEE electrical regulations or the national requirements.
  2. Turn the power off before inspection, installation, or removal.
  3. If the external flexible cable or cord of this luminaire is damaged, it shall be exclusively replaced by the manufacturer or his service agent or a similarly qualified person in order to avoid a hazard.
  4. Use IP66 rated environmentally sealed power connector with a cable clamp to ensure IP66 ingress protection
  5. Ensure power supply cables (L-N / L-N-E) are connected correctly before switching on.
  6. The light source contained in this luminaire shall only be replaced by the manufacturer or his service agent or a similarly qualified person.

Maintenance

  1. Ensure the power supply is switched off before attempting any maintenance work.
  2. Periodic cleaning of the luminaire optical lens cover will ensure maximum optical efficiency.
  3. Luminaire optical lens cover shall be cleaned with clean water and non-abrasive soap, cleaner or detergent solution.

Caution
The Luminaire must be used within the applicable product specifications, installation instructions and environmental conditions for storage & operations according to application guidelines provided by Signify for the product Warranty to be valid.

Warning

  1. The luminaire shall be installed by a qualified electrician and wired in accordance with the latest IEEE electrical regulations or the national requirements.
  2. Turn the power off before inspection, installation or removal.
  3. Refer to the technical datasheet for additional electrical properties to ensure safe installation.
  4. Luminaire installed must not be in contact with combustible materials.
  5. Ensure power supply cables (L-N/L-N-E) are connected correctly before switching on.
  6. The luminaire should be positioned so that prolonged staring into the luminaire at a distance closer than 3 m is not expected
  7. Do not stare at the operating light source.
  8. The light source and/or control gear and/or the external flexible cable contained in this luminaire shall only be replaced by the manufacturer or his service agent or a similarly qualified person.

Maintenance

  1. Ensure the power supply is switched off before attempting any maintenance work.
  2. Periodic cleaning of the luminaire optical lens cover will ensure maximum optical efficiency.
  3. Luminaire optical lens cover shall be cleaned with clean water and non-abrasive soap, cleaner or detergent solution.

Caution
The Luminaire must be used within the applicable product specifications installation instructions and environmental conditions for storage & operations according to application guidelines provided by Signify for the product Warranty to be valid.

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals