TandG TG-191 Bluetooth Speaker User Manual
- June 1, 2024
- TandG
Table of Contents
TandG TG-191 Bluetooth Speaker
Product Information
Specifications:
- Compliance: Part 15 of FCC Rules
- Conditions: Must not cause harmful interference, must accept any interference
Product Usage Instructions
Safety Precautions:
Before using the product, carefully read all safety instructions provided in the user manual.
Installation:
Place the device in a well-ventilated area with sufficient clearance around it to prevent overheating. Ensure a stable and flat surface for placement.
Powering On:
Connect the device to a power source using the provided power cable. Press the power button to turn on the device.
Operation:
Follow the on-screen prompts or refer to the user manual for specific operations and functions of the device.
Maintenance:
Regularly clean the device with a soft, dry cloth. Avoid using harsh chemicals or abrasive materials that may damage theproduct.
FAQ (Frequently Asked Questions)
-
Q: What should I do if the device is not powering on?
A: Check the power connection and ensure the power source is functioning properly. If the issue persists, contact customer support for assistance. -
Q: Can I make modifications to the device?
A: No, any changes or modifications not approved by the responsible party could void your authority to operate the equipment.
PRODUCT SPECIFICATIONS
- Wireless: V5.3
- Working distance:10M
- SNR:?:90db
- Battery: 3.7V 1200mah
- Normal volume playing time:3H
- Speaker driver: ¢45mm*2
- Speaker Power: 4 Q /5W * 2
- Frequency response: 120HZ-20KHZ
- Unit size:18273.569.2mm
- Unit weight: about 413 G (not include accessories)
- Charging:5V/500MAH
- Charging time:3-4H
PRODUCT FEATURE
- international advanced wireless chip and circuit design techniques, support wireless devices.
- With FM function, can search radio station broadcasts automatically.
- With a Hi-Fi speaker, to make sure a clear and bright sound.
- Support Micro SD card and USB card, play MP3 format audio.
- The wireless working distance is 10 meters.
- With AUX line in, can directly connect the outside devices, for example, tablet PC/TV/cell phones.
- it will close automatically after 30 minutes if disconnected Wireless
- Support TWS
KEY AND SLOT FUNCTION
- USB slot: It can decode and play MP3 format audio when the USB card into the slot.
- TF slot: It can decode and play MP3 format audio when put TF card into the slot.
- DC 5V slot: Use the standard Micro USB V8 charging cable for power charging.
- AUX line in the slot: Use the Mini 3.5 head input through outside devices.
- Power switch: Press long for power on /power off. When playing music,(USB card/TF card/Wireless/line in), short press for “play/pause”. In FM mode, press short to search station automatically, and press again to stop searching. Under wireless mode with mobile paired, when call comes, press short to answer a call hands-free, press again to hand up, and press twice to ring up a call.
- When playing music, Press short for last song, long press to turn down the volume.
- When playing music, press short for the next song, long press to turn up the volume
- short press to switch model (USB card/TF card/Wireless/ line in/FM).
Keep the two speakers under Wireless mode without pairing, press the “M” key for 3 seconds on either of the speakers until hear a hint and the meantime the button light stops flashing, now it is TWS mode ,then can paire the mobile.
NOTE: In the FM mode, pull in the AUX cable to increase the radio signal
Reset button built-in the LINE-IN hole
FCC
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, according to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used by the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>