VANBAR D700 4K WiFi Trail Camera User Manual

: June 6, 2024
: VANBAR

Table of Contents

Packing List
Function Overview
Preparing the Camera
Using the Camera and Set Up
Operating Buttons
Settings
WiFi and APP Connection
Mount Your Camera
Simple Trouble Shooting
Maintenance and Disposal
Read User Manual Online (PDF format)
Download This Manual (PDF format)

D700 4K WIFI Trail Camera

User Manual

If you have any questions or problems
Please contact us by
VANBAR-Service@outlook.com

We will offer prompt and authoritative reply within 24 hours and try our best to resolve your problem ASAP.

More Safe Guarantee with VANBAR !

Packing List

Please carefully unpack camera and check that below accessories are contained in the box.

Function Overview

1. Strap Slot
2. Lock Hole
3. Fixing nut
4. DC Power Input| 5. Infrared LEDs
6. PIR Indicator
7. WIFI Status Indicator
8. Microphone| 9. Lens
10. PIR sensor
11. Fixed button
12. PIR Sensor
---|---|---

13. LCD Screen
14. Shot Button
15. Right
16. UP / Video| 17. Menu Button
18. Left / WIFI
19. Reply
20. Down / Photo| 21. OK
22. Memory Card Slot
23. Mini USB Port
24. Mode Switch(ON/TEST/OFF)
25. Battery Compartment
---|---|---

Note:

The monitor is only switched on in the TEST mode for changing menu settings or viewing existing photos and videos.
Amicro memory card must have been inserted into the memory card slot to Save photos and videos.
Using the mini USB connection (USB 2.0), the camera can be connected to a computer to download photos and videos.
Using the mode switch, the three operating modes:OFF, TEST and ON can be selected.

Preparing the Camera

The camera must be inserted 8 x 1.5V AA batteries

Do not mix old and new batteries of different types.
Batteries are not included. Please prepare separately.
If you do not use the product for a long time, remove the battery and store it.
For best using experience, we recommend using 8 alkaline batteries to power the camera, lithium-ion rechargeable batteries are not ecommended because rechargeable batteries have lower voltage output and poor performance under low temperature, 2. AC adapter
At the bottom of the camera, there is an external power supply port, which support DC12V 2A power, power plug size is 3.5 X 1.35mm.
1. Insert a micro SD card (Class 10 TF card, Support up to 128G Max)
  Camera can’t operate without an micro SD memory card installed.
  Please install/uninstall the memory card when the camera is in the power-off State.
  *Please format the memory card before the first use.

Using the Camera and Set Up

Mode Switch
The Power Switch is used to control the camera working status.

TEST:
Under this mode, the camera screen is on. You can

Setup the menu.
Take photos or record videos manually
Check and replay.

Note: In TEST mode, if you do not operate for a long time, the camera will enter the power saving mode and the screen will turn off. The screen can be turned on by pressing any button on the camera.

ON:
When the camera is switched from TSET mode to ON mode, it will enter standby with low power consumption, screen display will turn off and button operation will be disabled. The camera will respond to the PIR sensors only. It will turn on and take photo or record videos when the PIR sensor is triggered, then return to standby afterwards.

OFF:
The camera is completely off, only in this mode, you can unplug the memory card, replace the batteries.

Operating Buttons

Set the mode switch to TSET and the camera and monitor are turned on. Using the operation buttons, different functions can now be activated and the settings can be changed. For this purpose, the following operation buttons are provided on the display panel.

Photo Mode

[Step 1] Press DOWN to get into Photo Mode.
[Step 2] Press SHOT to capture a photo and save it to your memory card.
[Step 3]Press REPLAY, the press to find the photo you’d like to check.
[Step 4] Press REPLAY to back to Photo Mode.
[Step 5) Press UP to switch to Video Mode.

Video Mode

[Step 1] Press UP to get into Video Mode.
[Step 2] Press SHOT to start recording a video and press it again to stop and save the video to your memory card.

Tip: The maximum length of each video is 10s by default. You can change it in Menu>Video Length
[Step 3] Press REPLAY, the press to find the video you’d like to check.
[Step 4] Press OK to play the video and press it again to stop.
[Step 5] Press REPLAY to back to Video Mode.
[Step 6] Press DOWN to switch to Photo Mode.

Delete/Lock Files
When replaying the photo or video, press MENU to bring up the Settings interface.
[Delete Current File] : To delete the file you are checking.
[Delete All Files): To delete all files.
[Activate Slide Show]: To make photos play in a loop.
[Write Protect]: To lock the files so that you can’t delete them. The protected file has an icon “ “. CED Back GS Select

Settings

Mode
Photo, Video, Photo + Video, select whether photos or videos should be taken when motion is detected. When in Photo + Video mode, the camera first takes a set of photos before recording a video.

PIR Interval
5 seconds – 60 minutes are available.
This function is to set the time interval for the PIR Sensors to detect motion.

When the PIR Sensors detect motion caused by people or animals, the camera Starts to record video or take photos. After finishing recording video or taking photos, the camera will enter standby mode. If you select 15 seconds as the time interval, the PIR Sensors will start detecting motion again after 15 seconds.

Note: Setting a long PIR interval prevents the memory card from filling up with many redundant images. And it also can reduce the battery consumption and ensure a long time usage.

PIR Level
High/Middle/Low.

Capture No
1P, 2P, 3P are available.
Select the number of pictures to be taken when this camera is triggered.

Video Length
Default 10 seconds, optional 3s-10 minutes.
Specify the duration of a video recording when the camera is triggered automatically.

Video Size (Resolution)
4K(3480×2160,10FPS), 2.7K(2688×1520, 20FPS), 1080P(1920×1080), 720P (1280×720), 720x480P, 640x480P. Select the desired video resolution.
Higher resolutions produce higher quality video, but as a result the recorded files will also be larger and require more space on the memory card.

Language
For the first use, please select the language for your camera.

Set Clock
For the first use, please set the date and time according to your location.

Stamp
To enable/disable the display of local time and date on the captured photos.

Photo Size
48MP, 32MP, 24MP, 20MP, 16MP, 12MP, 8MP, 5MP are available. Select the desired resolution for photos.

Software
To check the version of your camera software.

Audio Recording
On/Off. To set whether there is audio for the video or not.

Time Lapse
If you enable this function, the PIR Sensors of the camera will be deactivated. The camera will take photos at the time interval you set. These photos will be formed to a video, and you can only watch the video on a computer.

Timer Setting
You can enable it to set a working period for the camera. It will enter the standby mode if the time is not within the period.
If the start time is earlier than the current time, the setting will take effect the next day.
If the start time is later than the current time, the setting will take effect on the same day.

Loop Record
When the memory capacity is insufficient, the new video will overwrite the old video in time sequence.

Camera Name
You can enable it to name your camera with 4 digits.

Security Code
You can enable it to set a password for your camera with 4 digits.

Note: If you forget the password, please hold down the “MENU” and “REPLAY” buttons and at the same time,turn the switch to the “TEST” position.

Auto WIFI Off
Setup the time so the camera will automatically turn off WiFi when it is not connected a smart phone within the preset time.

Format
Format the memory card.

Default
Restore the camera to factory settings.

WiFi and APP Connection

App Installation
Before using the WIFI function, please install the APP on the smartphone device.

You can scan the below QR code to get the APP : VENARI.

http://www.dvplayer.net/venari.html

Before using the WIFI function, please install the APP on the smartphone device.

WiFi Connection
There are two methods to turn on the wifi.

Connect to camera wifi
Connect the Bluetooth to turn on wifi.
Note : Before using the “VENARI” APP, please make sure the phone’s Bluetooth and WiFi functions are turned on.

Connect to camera wifi

In “TEST” mode, press the “ ” button to turn on WiFi of the camera, the camera screen will display WiFi SSID and password (see picture below).
Open the “VENARI” APP on the smartphone and then click the “Connect to Camera WIFI”
The phone will automatically enter the WIFI connection interface, search for the WIFI named “TJ48K1W. And enter the password: 12345678

Connect the Bluetooth
Set the power button to “TEST” mode or “ON” mode.
Step 1: Open the “VENARI” APP on the smartphone and then click the ”
Bluetooth turn on WIFI” to enter the Bluetooth list.
Step 2: Select the corresponding Bluetooth name.(Hownic)
Step 3: The phone will automatically enter the WIFI connection interface, search for the WIFI named “TJ48K1W: And enter the password: 12345678
Return back to APP after the WIFI successful connection. On the APP, you can preview the picture being taken in real time, record videos, take pictures, menu settings, file playback/download/delete, and download files can be viewed in the APP album, and can be deleted or shared individually.

Note:

When the WIFI is waiting for connection, WIFI status indicator will flash frequently.
When the WIFI connected, the WIFI status indicator will flash once every second.

APP Operation
After successful connection, you can watch live video in the APP choose to take photos/ record videos, change setup and download the files to your phone, and manage the files in the APP menu.

Exit WIFI :
Method 1: Press the back button at the top left of the app (as shown in the picture “Home Screen”) and prompt “Turn off the camera”. Click”confirm” then WIFI will exit and turn off. The camera will also return to the preview screen.
Method 2: Short press the ~ LEFT button on the camera to exit WIFI. the camera will return to the main screen and the indicator will turn off. At the same time, the APP will exit the connection screen simultaneously.

Mount Your Camera

For security, please close the cover, fix it with back cover via the buckles, then lock the camera with a padlock (not included)

It is recommended that you mount your camera at an approximate height of your target animal and the views of the camera should not be obstructed.
Face the camera north or south to avoid over exposure from the sun.

OPTION 1:
Mount your camera with the Adjustable Webbing Strap (included)

NOTE:
A Cable Lock(not included) can be used for protecting it from being stolen

OPTION 2:
Mount your camera to a stand (included) through the Screw Hole on the bottom of the camera.

Model	D700
Image Sensor	48 MP CMOS sensor
Photo Resolution	48MP/ 32M/ 24M/ 20M/ 16M/ 12M/ 8M/ 5M
Screen	2.0″ color TFT LCD
Storage	Micro SD Card up to 128GB (NOT included)
Video Resolution	4K(3480×2160,10FPS), 2.7K(2688×1520, 20FPS),

Simple Trouble Shooting

The camera will not turn on.| 1. Please check whether the batteries are installed in proper way.
2. Check if the battery capacity is low or exhausted. If so, please replace by new batteries.
---|---
The camera turns off automatically.| 1. Please check whether the battery capacity is low or exhausted. If so, please replace by new batteries for outdoor using or connect AC adapter for indoor using.
Please check if SD card is full. If so, please transfer images and videos to your computer or delete some files in the REPLAY mode.
It shows “SD card Error”| 1. Please ensure that SD card is with class 10 standard or higher level.
Please use the camera to format SD card at the first time.
Videos are choppy or jumpy when played on a computer| 1. Try to use different media players such as VCL player.
Ensure AVI format Video clip can be played on your computer.
The image is not clear| Please ensure that you have removed the protective films on IR LEDs and lens before using.
The camera does not take images or record videos| Check if the capacity of the SD card is full, transfer images or videos to your computer or delete some files in the REPLAY mode.
Are rechargeable batteries allowed?| 1. No, because, rechargeable batteries are normally 1.2V, but the
camera needs at least a batter y pack of 8*1.5V batteries.
Sometimes shoot blank photos with no moving targets in it.| 1. The PIR sensor is very sensitive so that it will be triggered by some environmental factors such as a piece of falling leaf when the setting is at high level, so it is strongly recommended that the setting should be made at the medium level.
The “Video” and “Photo+ video” functions are not optional.| Please turn off the “Time Lapse” function.

Maintenance and Disposal

Care
Do not use any corrosive cleaners, such as methylated spirits, thinners, etc. To clean the camera housing and supplied accessories. When required, the clean system components with a soft dry cloth.

Storage
If the camera is not used for a period of time, be sure to remove the battery from the housing and store the battery separately. The battery can be stored in a dry place out of reach of children during daily work and for longer periods of time.

Care
For disposal, the packaging should be divided into different types and disposed of in the collection containers provided in accordance with environmental regulations. Batteries and accumulators shall not be disposed of in household waste. The law obliges consumers to return used batteries to public collection points.

FCC Warnning:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

This device may not cause harmful interference, and
this device must accept any interference received, including interference that may cause undesired operation.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body.