INALTO ICI30T.1 30cm Induction Cooktop Instruction Manual
- June 4, 2024
- INALTO
Table of Contents
INALTO ICI30T.1 30cm Induction Cooktop
THE CONTROL PANEL
LEGEND
- ON/OFF control
- Power / Timer regulating controls
- Heating zone selection controls
- Timer control
- Lock control
USING YOUR COOKTOP
To start cooking:
-
Touch the “ON/OFF” control and all the indicators will show “-”.
-
Make sure the bottom of the pan and the surface of the cooking zone are clean and dry.
Then place a suitable pan on the cooking zone that you wish to use. -
Touch the heating zone selection control for your desired zone. The indicator will flash.
-
Select a heat setting by touching the “-” or “+” button controls. The options range from 0–9. You can modify this temperature at any time during cooking. If you don’t choose a heat setting within 1 minute, the induction cooktop will automatically switch off. You will
need to repeat the previous steps.
To end cooking:
- Turn the whole cooktop off by pressing the “ON/OFF” button.
- Alternatively you can select your desired zone and use the “-” or “+” button controls to change the temperature of this zone to zero “0”. After a cooking zone is turned off, the corresponding indicator will show “H” until the zone has cooled to a safe temperature.
Note: For further operation instructions refer to pages 10 – 12 of your user manual.
DETAILS
Dimensions (W, D, H mm): 288 × 520 × 56
Built-in Dimensions (W, D mm): 268 × 500
Warranty: 3 Years (2 + 1 on registration)
SUPPORT
Telephone: 1300 11 4357
Email:
[email protected]