BESIGN BK07 Wireless Receiver User Manual
- June 5, 2024
- BESIGN
Table of Contents
BESIGN BK07 Wireless Receiver
Package Contents
Product Overview
Connect to the First Phone
- Plug the BK07 Receiver into the car USB port and 3.5mm port.
- It will automatically turn on and enter into pairing mode in 3-4 seconds when starting your car. Pairing mode: blue and red LED lights flashing alternately.
- Open your smartphone bluetooth setting, search “BK07” and connect.
- The BK07 LED turns solid blue after the Bluetooth connection is completed.
- If you want to disconnect it, you could turn off the bluetooth of your phone stop the USB port power supply or switch off the car. It will automatically reconnect to your phone next time after you power on this device.
Connect to the Second Phone
- Turn off the bluetooth of the first phone (tablet or computer) after successful pairing.
- This BK07 will enter into pairing mode in seconds with blue and red LED lights flashing alternately.
- Open your second phone bluetooth setting, search “BK07” and connect.
- The BK07 LED turns solid blue after the Bluetooth connection is completed.
- Connect the first phone with BK07 manually, now BK07 is connected with two phones at the same time.
Note:
Only one phone can play music at any time. You must stop the music on one
phone to play on the other phone.
If the Connection Fails
If the pairing is not established within 5 minutes, you can:
- Keep the receiver within the transmission range of 10m/32ft.
- Replug the USB connector of this unit.
- Reset the bluetooth on your phone.
Turning the BK07 Receiver On/Off
-
Turn on
Plug the BK07 Receiver into the car USB port with the power supply, the Blue LED indicator will stay on for 1 second. -
Turn off
Stop the car USB power supply, the Red LED indicator will stay on for 1 second.
Suggested Care & Maintenance
- Please power off when not in use or before storing.
- Please keep away from excessive heat and humidity.
- Do not use chemicals or detergents to clean this product.
- Extreme temperatures can shorten the lifespan of internal components.
- Keep out of reach of children.
- Please store this unit in dry, clean and moderate climates if you will not use this unit for a long time.
WEEE Compliance
- Correct Disposal of This Product (Waste Electrical& Electronic Equipment )(Applicable in countries with separate collection systems
- This Marking shown on the product or its literature indicates that it should not be disposed of with other household wastes at the end of its working life.
- To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate this from other types of waste and recycle it responsibly to promote the sustainable reuse of material resources. Household user should contact either the retailer where they purchased this product, or their local government office, for details of where and how they can take this item for environmentally safe recycling.
- Business users should contact their suppliers and check the terms and conditions of the purchase contract. This product should not be mixed with other commercial wastes for disposal.
FCC Statement
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
This device has been tested and found to comply with the limits for a Class B digital device, under Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This device generates, uses and can radiate radio frequency energy and, if not installed and used under the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this device does cause harmful interference to radio or television reception, which can be determined by turning the device off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the device and receiver.
- Connect the device to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
IC Statement
This device complies with Industry Canada licence-exempt RSS standard(s).
Operation is subject to the following two conditions:
- This device may not cause interference;
- This device must accept any interference, including interference that may cause undesired operation of the device.
Warranty & Customer Support
For questions, assistance, support, or warranty claims please contact us at the E-mail address as follows:
Made In China
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>