BOSCH SMI4IMS62T/33 Built In Dishwasher Installation Guide
- June 5, 2024
- Bosch
Table of Contents
BOSCH SMI4IMS62T/33 Built-In Dishwasher
Product Specifications
- Model: 64x AX Integr. Kusto-Leisten 81.5 cm – k. SW 9001 881 843 (0310) 9001881843
- Adjustability: 0 – 60 mm
- Tool Required: Torx T20
- Max Pressure: 10 l/min
- Max Torque: 10 Nm
- Dimensions: 26.4 mm x 20.9 mm
- Connection Sizes: (G 3/4), (G 1/2)
Product Usage Instructions
Installation
- Ensure the area is clear and ready for installation.
- Use the Torx T20 tool to adjust the product to the desired width within the range of 0 – 60 mm.
- Secure the product in place without pinching any parts to avoid damage.
- Check for proper alignment and adjust as needed to ensure a vertical fit.
- Remove any protective discs before using the product.
Maintenance
- After each use, verify the seal integrity following a washing cycle.
- Regularly inspect for leaks or loose components and tighten if necessary.
Storage
Store the product in a dry and secure location away from moisture and
direct sunlight.
PARTS AND TOOLS
INSTALLATION INSTRUCTION
DIMENSION
MORE INFORMATION
64x AX Integr. Kusto-Leisten 81,5 cm – k. SW 9001 881 843 (0310)
Frequently Asked Questions
- Q: What is the maximum torque required for this product?
- A: The maximum torque required is 10 Nm.
- Q: What tool should be used for adjustments?
- A: Use a Torx T20 tool to adjust the product width.
- Q: What are the dimensions of the product?
- A: The product dimensions are 26.4 mm x 20.9 mm.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>