ThreeH BK431 Bicycle Rear Rack Adjustable Aluminum Alloy Installation Guide
- June 4, 2024
- ThreeH
Table of Contents
ThreeH BK431 Bicycle Rear Rack Adjustable Aluminum Alloy
DIRECTIONS FOR USE
- Put the main cargo rack against the seat post.
- Aiming at quick release in right angle and fasten the screw.
Instructions
- Each bracket is equipped with a gasket to protect the frame. Place it in the correct position when installing.
- Tighten the support to the upper tube at the rear of the frame and tighten the screws.
- Loosen the screws on the support rod to adjust the length of the support rod.
- After adjusting the height, tighten the screws and washers, and then tighten the screws for adjusting tl1e length of the support rod.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>