savio LZ-11 Power Strip Surge Protector User Manual
- June 3, 2024
- Savio
Table of Contents
savio LZ-11 Power Strip Surge Protector User Manual
Thank you for choosing Savio product!
If our product meets your expectations, share your opinion with other people
on the portal ceneo.pl, social media or on the website of the store where you
made the purchase.
If you want to show our device on SAVIO Facebook Page, we will be very
pleased.
If there is something that we could improve on our products, please write to us at support@savio.net.pl
Thanks to your feedback, we will be able to better adapt the product to your expectations.
Before starting the use of purchased device it is recommended to read the whole manual.
-
Device installation:
1.1 Connect the plug of the LZ-11 strip to the 230V socket.
1.2 Start the power strip with the On / Off button. The readiness of the power strip will be signaled by the diode located below the switch, which will glow red.
1.3 Connect the plugs of the devices to the sockets of the LZ-11 strip. -
Package content:
• SAVIO LZ-11 Power strip surge protector 4 sockets with USB-A: QC 3.0 and USB-C: PD 18W, 1.5 m.
• User manual.
-
**Technical specification:
**
- **USB charger information:
**
- Safety conditions:
• Protect from moisture and flooding.
• Do not use damaged product.
• Carrying out repairs and modifications to the device will void the warranty and may damage the product.
• It is recommended to connect devices with ground protection (connecting an unprotected ground devices, can be dangerous and may cause electric shock).
• Connect only to sockets with a ground protection.
• Expand the wire before use.
• Do not cover.
Warranty:
The warranty covers a period of 24 months. Independent repairs and modifications result in automatic loss of the warranty. Warranty card is available for download on our website: www.savio.net.pl/en/service
Information for customers and contractors and communication regarding complaints:
Pursuant to Article 13 section 1 and 2 ofa the General Data Protection Regulation (EU) 2016/679 of the European Parliament and of the Council of 27 April 2016 (hereinafter referred to as GDPR), please be advised that Elmak Sp. z o.o., with its registered seat at ul. Morgowa 81; 35-323 Rzeszów becomes the Administrator of your personal data. The Specialist for General Data Protection (SODO) can be contacted in writing to: SODO, Elmak Sp. z o.o., ul. Morgowa 81; 35-323 Rzeszów, via e-mail address: sodo@elmak.pl, and by phone at +48 (17) 854 98 14. Your personal data will be processed in order to perform the contract, in accordance with Article 6(1)(b) of the aforementioned regulation, to the extent resulting from tax laws and financial regulations. Recipients of your personal data include entities authorized by legal regulations to obtain personal data as well as processing entities providing services to Elmak Sp. z o.o. Your personal data will be stored on the basis of Administrator’s legitimate interest. You have the right to access your data, and the right to rectify, delete or limit processing of your data. You have the right to lodge a complaint to the supervisory body if you believe that the processing violates the GDPR. The provision of personal data is voluntary, however, a failure to provide such data may result in a refusal to conclude or in termination of a contract. Your personal data will not be subjected to automated decision making, including profiling referred to in Article 22 section 1 and 4 of the GDPR of April 27, 2016.
Information of the utilization of electrical and electronic equipment
This symbol indicates that electrical appliances should not be discarded with other household waste. Used equipment should be handed over to a local collection point for this type of waste or to a recycling center. Please contact your local authorities for information about disposal methods available in your area. Waste electrical equipment may contain hazardous substan
PRODUCER:
Elmak Sp. z o.o.
ul. Morgowa 81
35-323 Rzeszów
www.savio.net.pl