Vybra VSA001 Arch Bladeless Cooling Heating and Air Purifying Fan Instruction Manual

Vybra VSA001 Arch Bladeless Cooling Heating and Air Purifying Fan

Product Specifications

• Product Name: PTC HEATER, BLADELESS COOLING FAN & UVC AIR STERILISER
• Model: VSA001
• Rated Voltage: 220-240V
• Operating Frequency: 50-60Hz
• Rated Capacity: 45W (Fan), 2000W (Heat)
• Oscillation: Yes
• Timer: 1-8 hours
• Size: 255 x 255 x 700 mm
• Weight: 4.6kg
• Scope of Supply: Host, Remote, User Manual

Assembly and Parts

• Magnetic remote control
• Air outlet
• Magnetic top cover of purifying filter
• Air inlet
• Power button LED Screen
• Safety lock power ON/OFF button

Important Information

1. Remove all packaging materials before use.
2. Ensure the fan is on a flat and stable surface before operation.
3. Set all controls to the OFF position before plugging into a compatible socket.
4. Avoid inserting objects through the grill when the product is operating.
5. Unplug the product when moving it to a different location.
6. Always unplug before removing grills for maintenance.

Product Usage Instructions

Setting Up the Vybra ARCH 3-in-1 Heater, Fan, and Air Sterilizer

1. Place the product on a flat, stable surface away from heat sources or direct sunlight.
2. Ensure all controls are in the OFF position before plugging into a compatible power outlet.
3. Remove any packaging materials and assemble the included parts according to the user manual.
4. If using the remote control, ensure the batteries are correctly inserted.

Operating the PTC Heater and Bladeless Fan Functions

1. To use the PTC Heater function, press the corresponding power button on the device or remote control.
2. Adjust the temperature settings as needed using the controls provided.
3. To activate the Bladeless Cooling Fan mode, switch to the fan function and adjust speed settings if applicable.

UVC Air Sterilizer Usage Instructions

1. Ensure the air sterilizer function is turned on separately from the heater or fan modes.
2. Follow safety guidelines regarding UVC light exposure and avoid direct contact with eyes or skin.

IMPORTANT SAFEGUARDS

Please read all instructions before using this product and keep these safety instructions for future reference. When using electrical appliances, basic precautions should always be followed to reduce the risk of fire, electrical shock and injury to persons, including the following:

1. This product is only suitable for indoor use and should not be used outdoors;
2. Non-professional personnel or unauthorised repair personnel may not repair or modify the machine by themselves;
3. Before plugging in the power supply, please check the rated voltage matches the voltage in your home;
4. Keep at least 1.5 meters away from fire source and avoid direct sunlight;
5. Do not use near objects that are flammable, explosive, subject to heat, deformation, discolouration or deterioration;
6. Do not use in places with severe dust;
7. To avoid overheating and fire risk, do not cover the heater;
8. To avoid electric shock, do not insert any wire or other foreign matter into any hole of the machine;
9. Do not use the heater against the power outlet or under the power outlet;
10. The power outlet should be placed behind the fan when the heater is in use;
11. Do not share the socket with other high-power appliances;
12. Do not use this heater in the bathroom, or near water;
13. This product must be equipped with a UKCA-approved fixed socket that is consistent with the rated working current. Do not use a mobile multi-purpose socket;
14. If the heater fails, please turn off the power and unplug the power cord immediately;
15. Before use, check the power cord and the plug. If the power cord is damaged, please do not switch on, but contact the seller;
16. For safety reasons, children, elderly people or patients who have lost their ability to take care of themselves should use this appliance under the supervision of a responsible adult.

PRODUCT SPECIFICATIONS

Product Name

| PTC HEATER, BLADELESS COOLING FAN & UVC AIR STERILISER
---|---
Model| VSA001| Rated Voltage| 220-240V

Operating frequency

|

50-60Hz

|

Rated capacity

| 45W (Fan)

2000W (Heat)

Oscillation

|

80±5°

|

Timer

|

1-8H

Size

| 255 x 255 x 700

(mm)

|

Weight

|

4.6kg

Scope of supply: host, remote, User Manual

ASSEMBLY AND PARTS

IMPORTANT INFORMATION

1. Remove all packaging materials
2. Before using the fan, make sure that it is on a flat and stable surface. Damage may occur if it is placed on an incline or a decline.
3. Set all the controls to the OFF position and insert the plug into a socket outlet that is compatible with the rating label on the product.
4. Never insert fingers, pencils or any other object through the grill when the ARCH is operating.
5. Unplug the ARCH from the power supply when moving it from one location to another location.
6. Unplug the ARCH from the power supply when removing the grills for cleaning
7. Avoid blocking the air inlet and keep away from material, such as curtains, to keep the air inlet clear
8. Avoid placing objects within 30 cm of the outlet

OPERATING INSTRUCTIONS

1. Power ON/OFF
   • Press for 1 second to Power on.
   • Press and hold for 2 seconds to Power off.
   • Press for 5 sec to connect WIFI.
2. Cool Fan speed – when the fan is operating:
   • Press repeatedly to adjust the fan speed (up to 9-speed settings).
3. Heater speed – when the heater is operating
   • Tap to display the environmental temperature.
   • Tap repeatedly the button to adjust the heater speed (up to 4-speed settings).
4. Oscillation – when the fan is operating:
   • Tap and hold the button for 1 sec, the fan will start to oscillate
   • Tap and hold the button for 1 sec again to stop oscillation.

SCREEN MANUAL

• Insert the power plug into the socket
• Turn the power switch ON
• The LED display will turn ON

Wind Circle Adjustment

• After the operation stops, swing in the direction you like;
• Please hold down the main unit with one hand, and adjust the wind ring by 15 degrees front and rear.

ON / Standby Operation

• After connecting the power, turn on the power switch and enter the standby state;
• Click the power button of the main unit, the buzzer will beep once to start operation;
• Press and hold the power button of the main unit for 2 seconds, the buzzer prompts two beeps, and when you let go, it stops running.

Air Volume Shift

• When the host is running:
• Cold wind mode: Press the power button of the main unit, and the air volume will switch from gear 1 to gear 9.
• Warm air mode: Press the power button of the main unit, and the air volume will switch from gear 1 to gear 4.

Oscillation

• When the host is running:
• Press and hold the power button of the main unit again for 1 second, the buzzer will make a beep, and when you let go it will oscillate.

HEATER OPERATION

• Press “heater mode sign” to turn on heater mode.
• The LED screen will display the ambient temperature* (tempºC). Adjust the temperature setting, the number shown in the screen will flash ranging from 1-30ºC, it will stop flashing after 5 seconds if no button is pressed,
• The thermostat is set.
• As soon as the room temperature has dropped below the set temperature, the unit will switch itself on automatically until the set temperature has been reached again. In this way, the room temperature remains constant with the most economical use of electricity.
• NOTE : heater default temperature setting is 25ºC
• When the ambient temperature drops below 0°C, the display will show the ambient temperature as “01” instead of displaying a negative temperature.
• After 9 hours of warm air operation, the fan will automatically stop running and enter the standby state.
• NOTE : Heater will first deliver heat from left side air outlet, and will deliver heat from the right side after 20 seconds. This is normal.
• The temperature setting in the heating mode can only be adjusted using the remote control

UVC STERILISATION RANGE

• Cool Fan Air Circulation: Delivery up to 4.5m (max.)
• Heater Air Circulation: Delivery up to 3.6m (max.)
• Make sure to leave at least 30cm of space around the product, insufficient ventilation may cause overheating or fire hazards.

REMOTE CONTROL

Battery

1. Before first use: remove the clear contact-prevention strip coming out of the closed battery compartment.
2. Battery replacement: as shown in the following picture. Please note the battery direction.
3. Do not install the positive and negative poles of the battery in the wrong position.
4. Use only the specified battery.
5. Do not recharge, this is a non-rechargeable battery.
6. Take out the battery when not in use for more than 2 months.
7. The remote control should be pointed at the remote control receiver found on the LED screen.

OPERATION
Your fan may be operated by using either the manual controls located on the front of the fan or by your remote control.

CLEANING & MAINTENANCE

This appliance requires little maintenance. It contains no user-serviceable parts. Any servicing requiring disassembly, other than cleaning, must be performed by a qualified appliance repair technician.

• CAUTION : To prevent damage to the appliance do not use alkaline cleaning agents when cleaning, use a soft cloth and a mild detergent.
• Regular maintenance of your product will keep it in safe and proper working order.

BEFORE CLEANING

• When not in use or before cleaning, always disconnect the appliance from the mains supply.
• Never immerse the motor unit in water or any other fluid, do not rinse under the tap.
• Use only a moist cloth to clean the motor unit.

CARE AND CLEANING

• The ARCH should be cleaned with a mild soap (detergent) and a damp cloth or sponge. Ensure that all traces of soap film are removed with a damp cloth or sponge after cleaning.
• Do not use spray cleaners
• A vacuum cleaner can be used to lightly vacuum dust from the vents.
• NOTE : Do not wash the filter directly.

NOTE : When you operate the remote control, the fan will ‘beep’.

UPGRADE:
Should you wish to remove air particles from your room as well, the Vybra Arch has the option to be fitted with a Hepa Filter.

Please contact sales@vybrasolutions.co.uk

TROUBLESHOOTING

No power

| ****

– The power cord is not connected

– There is no power from the socket

– The power switch is not on

– The machine is damaged

| ****

– Connect the power cord

– Check the socket is turned on

– Turn the unit on

– Contact Vybra Solutions: sales@vybrasolutions.co.uk

Odour emission from unit

| ****

New Unit – when the unit is used for the first time, the fan motor may produce an odour that will dissipate within a week of use

| ****

No action required

Strong vibrations and noise

| ****

– The fan is not positioned on a flat surface

– The fan may be damaged

| ****

– Place the ARCH on a flat surface

– If the fan is damaged, unplug the ARCH and contact the service centre

Remote Control issues

| –  The battery is depleted or discharged

–  The battery is incorrectly installed

–  The remote control is not properly aligned with the signal receiver

| –  Replace the battery

–  Reinstall the battery correctly

–  Point the remote directly at the display

How to Connect the VYBRA ARCH to the App

1. Your phone must be connected to a Wi-Fi network.
2. Download the “TUYA smart” or “SMART life” app or scan one of the following QR codes:
3. When you use the app for the first time, you will need to create an account.
4. Press and hold the LED display for 5 seconds until it beeps 3 times. When “F” appears and blinks, press “confirm” to continue. Select your Wi-Fi network and enter your password. Press “confirm” to continue.
5. Sign in to the app and click “+” or “add device” in the upper right corner. Click “all devices” on the right side and select the fan.
6. The app will automatically pair to the appliance. Once the appliance has been found, you will be notified. You can now rename your appliance. Press “done” to finish the process.

Please scan the QR code to download a copy of your Vybra ARCH User Manual

• A guide to 2.4GHz and 5GHz networks
  If you own a “dual band” router (identified on the sticker on the back), you will have the option of using two bands throughout your home: 2.4GHz and 5GHz.

• What’s the difference between 2.4GHz and 5GHz?
  Each WiFi enabled device in your home can connect to one of the 2.4GHz or 5GHz bands at one time. The 2.4GHz network is slightly slower, but can cover a large area, as the signal is more effective at penetrating thick walls. The 5GHz network is faster but has a shorter range, offering a better connection for devices within close proximity. It’s worth noting some connected devices, such as older smart phones, are not compatible with 5GHz networks.

• How do I find out which band I’m using by default?

  • Most dual band routers will be set up with two separate WiFi networks by default. Often the 5GHz network will often have “5G” or “AC” at the end of its name. If this isn’t the case, either the router may be selecting the band automatically, or the router or device may not support 5GHz. (Note: 5GHz WiFi is not to be confused with 5G wireless mobile networks).
  • Some routers will automatically do a quick scan to determine which channels have the least interference and choose the best option for your device. In other cases, your device will connect to its preferred network, which could be the one you most recently connected to, or the one you have manually selected the most often.
  • To see which band you’re connected to, open the WiFi preferences on your device. Whether you’re using a phone, tablet, computer, TV or another connected device, you should be able to see two WiFi network options in the settings. From there you can select which one you’d prefer to use.

• Adjusting the settings on a router
  Every router has an IP address (e.g. 192.168.1.1) displayed somewhere on the device. Type that into a web browser while you’re connected to your WiFi network. You’ll reach a login page – use the default login  details (written near the IP address on the device) to proceed. Once logged in you’ll see a configurationpage where you can edit network preferences, as needed.

Switching between 2.4GHz and 5GHz

• Windows
  • Click on the WiFi icon in the bottom right corner of the taskbar.
  • Then click on the network you want to use from the list of available networks.
  • Click Connect (type in the password and click Next if it’s your first time connecting to this network).
• Apple Mac
  • Click on the WiFi icon in the top menu bar
  • Then select the network you want to use from list of available networks.
  • If applicable: type in the password when prompted and click Join.
• Apple IOS
  • iOS devices: tap Settings > WiFi
  • Select the network from the list of available networks
  • Type in the password > Join
• Android
  • Settings > Connections > WiFi
  • Select the network from the list of available networks
  • Type in the password > Connect

vybrasolutions.co.uk | sales@vybrasolutions.co.uk

FAQ

Q: Can I use the Vybra ARCH outdoors?
A: No, the product is only suitable for indoor use as stated in the safety instructions.

Q: How do I clean the air filter?
A: Refer to the user manual for instructions on how to safely remove and clean the air filter of the Vybra ARCH.

References

• Vybra for clean air & comfortable living

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>