JBL TUNE 115TWS Manual: Comprehensive Guide to Wireless Earbuds
- June 2, 2024
- JBL
Table of Contents
The JBL TUNE 115TWS Manual is a comprehensive guide to using the wireless earbuds. This manual provides detailed instructions on how to wear, power on and connect, pair, and power off the earbuds. It also includes information on manual controls and button commands, as well as how to charge the earbuds and understand their LED behaviors. The manual also provides technical specifications and information on battery life. It is important to note that to prolong the battery lifespan, the earbuds should be fully charged at least once every three months. Additionally, the manual includes IC RF exposure information and statements, which provide guidelines for maintaining compliance with RF exposure requirements. The JBL TUNE 115TWS Manual is available in both optimized and original PDF formats and is a valuable resource for anyone looking to get the most out of their wireless earbuds.
_ **JBL TUNE 115TWS Manual**_
JBL TUNE
115TWS Quick Start Guide
JBL
TUNE 115TWS Box Content
JBL
TUNE 115TWS How to Wear
JBL TUNE 115TWS power on & connect
JBL TUNE 115TWS Pairing
JBL TUNE 115TWS Power Off
JBL TUNE 115TWS Manual Controls
JBL TUNE 115TWS BUTTON COMMAND
JBL TUNE 115TWS Charging
JBL TUNE 115TWS LED Behaviors
JBL TUNE 115TWS TECH SPEC
TO PROLONG BATTERY LIFESPAN, FULLY CHARGE AT LEAST ONCE EVERY 3 MONTHS. BATTERY LIFE VARIES BY USE AND SETTINGS.
IC RF Exposure Information and Statement
The SAR limit of Canada (C) is 1.6 W/kg averaged over one gram of tissue.
Device types: (IC:6132A-TUNE115TWS) has also been tested against this SAR
limit According to this standard, the highest SAR value reported during
product certification for head use is 0.197W/kg. The device was tested for
typical bodily operations where the product was kept 0 mm from the head. To
maintain compliance with IC RF exposure requirements, use accessories that
maintain a separation distance of 0mm between the user›s head and the back of
the headset. The use of belt clips, holsters and similar accessories shall not
contain metal parts in its assembly. Use of accessories that do not meet these
requirements may not comply with IC RF exposure requirements and should be
avoided.
Head operation
The device was subjected to a typical head manipulation test. In order to
comply with RF exposure requirements, a minimum separation distance of 0 cm
must be maintained between the user›s ear and the product (including the
antenna). Head exposure that do not meet these requirements may not meet RF
exposure requirements and should be avoided. Use only the supplied or approved
antenna.
IC:6132A-TUNE115TWS
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by HARMAN International Industries, Incorporated is under license. Other trademarks and trade names are those of their respective owners.
FCC ID: APITUNE 115 TWS
JBL TUNE 115TWS Manual – Optimized PDF
JBL TUNE 115TWS Manual – Original PDF
SPECIFICATION
Product Specifications
|
Details
---|---
Model
|
JBL TUNE 115TWS
Manual Formats
|
Optimized PDF, Original PDF
Wearing Style
|
In-ear
Connectivity
|
Wireless Bluetooth
Controls
|
Manual and button commands
Battery Life
|
Varies by use and settings
Battery Charging
|
Full charge at least once every 3 months
LED Behaviors
|
Indicates charging and pairing status
Technical Specifications
|
IC RF Exposure Information and Statement
IC RF Exposure Requirements
|
Use accessories that maintain a separation distance of 0mm between the user’s head and the back of the headset. The use of belt clips, holsters and similar accessories shall not contain metal parts in its assembly. Use of accessories that do not meet these requirements may not comply with IC RF exposure requirements and should be avoided.
FCC ID
|
APITUNE 115 TWS
Bluetooth®
|
Registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by HARMAN International Industries, Incorporated is under license. Other trademarks and trade names are those of their respective owners.
FAQS
How do I maintain compliance with IC RF exposure requirements?
Use accessories that maintain a separation distance of 0mm between the user’s head and the back of the headset. The use of belt clips, holsters and similar accessories shall not contain metal parts in its assembly. Use of accessories that do not meet these requirements may not comply with IC RF exposure requirements and should be avoided.
How often should I fully charge the earbuds?
To prolong the battery lifespan, the earbuds should be fully charged at least once every three months.
How long does the battery last?
Battery life varies by use and settings, but the earbuds can last up to six hours on a single charge. The charging case can provide an additional 15 hours of battery life.
What do the LED behaviors indicate?
The LED light on the front of the charging case will flash different colors to indicate the battery level of the case and earbuds, as well as when the earbuds are in pairing mode or charging.
How do I charge the earbuds?
Place the earbuds back into the charging case and ensure that they are properly aligned with the charging pins. The LED lights on the front of the case will indicate when the earbuds are charging.
What are the button commands for the earbuds?
The button commands include pressing and holding either earbud for two seconds to activate your device’s voice assistant, and pressing and holding both earbuds for three seconds to enter pairing mode.
What are the manual controls for the earbuds?
The manual controls include tapping once on either earbud to pause/play music or answer/end calls, tapping twice on the right earbud to skip to the next track, and tapping twice on the left earbud to go back to the previous track.
How do I power off the earbuds?
To power off the earbuds, place them back into the charging case.
How do I pair the earbuds with a new device?
Put the earbuds back into the charging case and press and hold the button on the back of the case until the LED light flashes white. Then, follow the same steps as when you initially connected the earbuds to a device.
How do I power on and connect the earbuds?
To power on the earbuds, remove them from the charging case and they will automatically enter pairing mode. To connect them to your device, go to your device’s Bluetooth settings and select “JBL TUNE 115TWS” from the list of available devices.
How do I wear the JBL TUNE 115TWS earbuds?
The earbuds should be placed in your ears with the JBL logo facing upwards and the ear tips inserted into your ear canal.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>