SKY DEVICE SKYPLATP4 Smartphone Owner’s Manual
- June 5, 2024
- SKY DEVICE
Table of Contents
SKY DEVICE SKYPLATP4 Smartphone
General Information
Profile
Please read this pamphlet carefully in order to make your phone in perfect
condition. Our company may change this mobile phone without prior written
notice and reserves the final right to interpret the performance of this
mobile phone. Due to different software and network operators, display on your
phone may be different, refer to your phone for details.
Safety warning and attention
Safety warning
-
ROAD SAFETY COMES FIRST
Do not use a hand-held phone while driving. Use hands-free fittings when calls are unavoidable while driving. In some countries, dialing or receiving calls while driving is illegal! -
SWITCH OFF IN AIRCRAFT
Wireless devices can cause interference in aircraft. Using a mobile phone in flight is illegal and risky.
Please make sure that your mobile phone is powered off in flight. -
SWITCH OFF BEFORE ENTERING RISKY AREAS
Strictly observe the relevant laws, codes, and regulations on the use of mobile phones in risky areas. Turn off your mobile phone before entering a place susceptible to explosion, such as an oil station, oil tank, chemical plant or a place where a blasting process is under way. -
OBSERVE ALL SPECIAL REGULATIONS
Follow any special regulations in force in any area such as hospitals and always switch off your phone whenever it is forbidden to use it or, when it may cause interference or danger. Properly use your mobile phone near medical apparatuses, such as pacemakers, hearing aids and some other electronic medical devices, as it may cause interference to such apparatuses. -
INTERFERENCE
The conversation quality of any mobile phone may be affected by radio interference. An antenna is built inside the mobile phone and located below the microphone. Do not touch the antenna area during a conversation, lest that the conversation quality deteriorates. -
QUALIFIED SERVICE
Only qualified personnel may install or repair phone equipment. Installing or repairing the mobile phone on your own may bring great danger and violates the warranty rules. -
ACCESSORIES AND BATTERIES
Use only approved accessories and batteries. -
USE SENSIBLY
Use only in a normal and pro -
EMERGENCY CALLS
Ensure the phone is switched on and in service, enter the emergency number, e.g. 112, then press the Dial key. Give your location and state your situation briefly. Do not end the call until told to do so.
Note: Just like all other mobile phones, this mobile phone does not necessarily support all the features described in this manual due to network or radio transmission problems. Some networks even do not support the emergency call service. Therefore, do not rely solely on the mobile phone for critical communications such as first aid. Please consult the local network operator.
Precautions
This mobile phone is well designed with fine art. Please exercise special care when using it. The following suggestions will help your mobile phone survive the warranty period and extend its service life: -
Keep the mobile phone and all its fittings beyond children’s reach.
-
Keep the mobile phone dry. Keep away from rain, moisture, liquid or other substances that may corrode electronic circuits.
-
Do not use or store the mobile phone in dusty places; lest that active parts of the mobile phone be damaged.
-
Do not store the mobile phone in a high-temperature place. High temperature will shorten the life of electronic circuits and damage the battery and some plastic parts.
-
Do not store the mobile phone in a chilly place. Otherwise, moistures will be formed inside the mobile phone to damage electronic circuits when the mobile phone is moved to a constant temperature place.
-
Do not throw, knock or shock the mobile phone, as that will destroy the internal circuits and high-precision components of the mobile phone.
Your phone
Phone overview
Functions of Keys
The mobile phone provides the following keys:
-
Power key
Power key situates at the right side of the phone. While using the phone, you can press this key to lock screen; if you press and hold this key, a phone- options dialog would pop out. Here, you can select to power off, reboot, screenshot and emergency. -
Volume key
Volume key situates at the right side of the phone. You can press it to adjust ringer volume.
Functions of icons
-
Menu icon
Touch this icon to access options of a selected function; -
Home icon
Touch it to open home screen. If you’re viewing the left or right extended Home screen, touch it can enter the home screen. -
Back icon
Touch this icon to return to the previous screen;
Getting started
Installing the SIM Card and the Battery
A SIM card carries useful information, including your mobile phone number, PIN
(Personal Identification Number), PIN2, PUK (PIN Unlocking Key), PUK2 (PIN2
Unlocking Key), IMSI (International Mobile Subscriber Identity), network
information, contacts data, and short messages data.
Note:
After powering off your mobile phone, wait for a few seconds before removing
or inserting a SIM card. Exercise caution when operating a SIM card, as
friction or bending will damage the SIM card. Properly keep the mobile phone
and its fittings such as the SIM cards beyond children’s reach.
Installation
- Hold the power key for a while and select power off to power off the mobile phone.
- Take the back cover away.
- Locate the SIM card slot, and then insert the SIM card with its gold contacts facing down and its cut-off corner facing out the card slot. Slide the SIM card completely into the slot.
- With the metallic contacts of the battery facing the metallic contacts in the battery slot, install the battery.
Note:
The SD card is a miniature object. Keep it out of the reach of children for
fear that children swallow it!
Charging the Battery
- Your mobile phone can monitor and display the battery state.
- Normally the remaining energy of the battery is indicated by the battery level icon at the upper right corner of the display screen.
- When the battery energy is insufficient, the mobile phone prompts “Battery low”.
- Using a travel adapter:
- Install the battery into the mobile phone before charging the battery.
- Connect the adapter of the travel charger with the charging slot in the mobile phone. Ensure that the adapter is fully inserted.
- Insert the plug of the travel charger to an appropriate power outlet.
- As the battery is being charged while the device is on, a charging icon appears in the title bar of the Home screen. After the battery has been fully charged, a full battery icon appears in the title bar of the Home screen.
Note:
Ensure that the plug of the charger, the plug of the earphone, and the plug of
the USB cable are inserted in the right direction. Inserting them in a wrong
direction may cause charging failure or other problems.
Before the charging, ensure that the standard voltage and frequency of the
local mains supply match the rated voltage and power of the travel charger.
Optimizing battery life
You can extend your battery’s life between charges by turning off features
that you don’t need. You can also monitor how applications and system
resources consume battery power. To guarantee the optimal performance of your
battery, please stick to the following rules:
- Turn off radios, Wi-Fi®, Bluetooth®, or GPRS in any situation, that you aren’t using.
- Turn down screen brightness and set a shorter screen timeout.
- If you don’t need them, turn off automatic syncing for Gmail, Calendar, Contacts, and other applications.
On the Home screen, press Menu icon and touch Settings > Battery. The top of
the screen displays when the battery should last.
Linking to the Networks and devices
Your phone can connect to a variety of networks and devices, including mobile
networks for voice and data transmission, Wi-Fi® data networks, and Bluetooth®
wireless connection devices, such as headsets. You can also connect your phone
to a computer, to transfer files from your phone’s SD card and share your
phone’s mobile data connection via USB.
Connecting to mobile networks
When you assemble your phone with a SIM card, your phone is configured to use
your provider’s mobile networks for voice calls and for transmitting data.
Connecting to Wi-Fi® networks
Wi-Fi® is a wireless networking technology that can provide Internet access at
distances of up to 100 meters, depending on the Wi-Fi® router and your
surroundings. Touch Settings>Network > Wi-Fi®. Check Wi-Fi® to turn it on. The
phone scans for available Wi-Fi® networks and displays the names of those it
finds. Secured networks are indicated with a Lock icon.
Note: If the phone finds a network that you connected to previously, it
connects to it. Touch a network to connect to it. If the network is open, you
are prompted to confirm that you want to connect to that network by touching
Connect. If the network is secured, you’re prompted to enter a password or
other credentials. Connecting to Bluetooth® devices Bluetooth® is a short-
range wireless communications technology that devices can use to exchange
information over a distance of about 8 meters. The most common Bluetooth®
devices are headphones for making calls or listening to music, hands-free kits
for cars, and other portable devices, including laptops and cell phones. Touch
Settings>Connected devices. Check Bluetooth® to turn it on. You must pair your
phone with a device before you can connect to it. Once you pair your phone
with a device, they stay paired unless you unpaired them. Your phone scans for
and displays the IDs of all available Bluetooth® devices in range. If the
device you want to pair with isn’t in the list, make it discoverable.
Connecting to a computer via USB
You can connect your phone to a computer with a USB cable, to transfer music,
pictures, and other files between your phone’s SD card and the computer.
Using the touch screen
-
Touch
To act on items on the screen, such as application and settings icons, to type letters and symbols using the onscreen keyboard, or to press onscreen buttons, you simply touch them with your finger. -
Touch & hold
Touch & hold an item on the screen by touching it and not lifting your finger until an action occurs. For example, to open a menu for customizing the Home screen, you touch an empty area on the Home screen until the menu opens. -
Drag
Touch & hold an item for a moment and then, without lifting your finger, move your finger on the screen until you reach the target position. -
Swipe or slide
To swipe or slide, you quickly move your finger across the surface of the screen, without pausing when you first touch it (so you don’t drag an item instead). For example, you slide the screen up or down to scroll a list.
Lock screen
When Screen lock in Security setting is enabled, press Power key to lock the
handset. This helps to prevent accidental touching of keys and as well as
power saving. When Screen timeout in Display setting is enabled, after the
handset device has been idle for preset period, the screen will be locked
automatically to save power.
Unlock screen
Press Power key to switch on the handset device. The lock screen appears.
Touch and slide Up to unlock screen, and the screen being locked last time
will show.
Using the onscreen keypad
You enter text using the onscreen keyboard. Some applications open the
keyboard automatically. In others, you touch a text field where you want to
enter text to open the keyboard. You can also enter text by speaking instead
of by typing.
-
To enter text
Touch a text field, and the onscreen keyboard opens. Some applications open the keyboard automatically. In others, you touch a text field where you want to enter text to open the keyboard. -
Touch the keys on the keyboard to type.
The characters you’ve entered appear in the text field, with suggestions for the word you are typing below. -
Use the Delete icon to erase characters to the left of the cursor. After finishing typing, touch Back icon to close the keyboard.
Dialing Calls
-
Dialing a call to a number in the contacts
Touch the Phone icon or the phone application icon on the Home screen, then select the Contacts tab. Swipe or slide upward/downward to pick out the target contact. Then you can touch the dial icon to originate a call. -
Dialing a call to a number in call log
Touch the Phone icon or the phone application icon on the Home screen, then select the call log tab. Swipe or slide upward/downward to pick out and touch the target contact. Then you can originate a call. -
Answering incoming calls
- Touch the Answer icon to answer an incoming call.
- Touch the End icon to end the current conversation.
- To reject an incoming call, touch the Decline icon.
-
Managing multiple calls
If you accept a new call when you’re already on a call, you can touch the Answer icon to answer the current calls. -
Call history
- The missed call icon appears in the title bar when you missed a call.
- Use ‘Call history’ tab to check who the caller was, or view all your dialed numbers, and received calls. To open ‘Call history’ tab, touch ‘Call history’ button in the phone screen to enter the call history list.
- Scroll to select the contact or number you want to dial, touch ‘Call ’ button.
- Tap and hold the selected contact you want to call, and then you can make to do the following options of call, send message or add to a contact on the shortcut menu.
Using the Menus
Google Chrome
You can use Chrome to view web pages and search for information on the
web.When you open Chrome, your home page opens. The web address (URL) of the
current page is displayed at the top of the window.
Camera
Touch the Camera icon in the main menu interface or on the home screen, you
can touch the camera icon to take a photo, touch photo and slide right to
switch between photo, video and gif
Contacts
The contacts on your phone are synced with your account contacts stored on the
Web. To view the contacts on your phone, select Contacts. Browse through your
contacts by sliding your fingertip up and down on the screen. Another way to
find a contact quickly is to use “Search contacts” button, input the first
letter of the name you’re looking for and touch search icon, the matching
contacts are appeared on the screen.
From the Contacts tab, you can:
- Go to Contact details: Select the contact’s name to open the Contact details screen, where all screen the information you’ve saved for this contact is displayed.
- Take action on a contact: On the Contact details screen, you can view call the contact’s number, send a text message, add or remove a star or edit the contact details.
- On the Contact details screen, press MENU to open the context menu. From the menu you can select to share, add to on home screen, or delete the contact and so on.
Gmail
You use the Gmail application to read and send email. There are many email
address to choose Touch email icon to access it. If the Email account has not
been set up, you can set up an Email account in a few steps.
-
Account setup
Enter an Email address and the account’s password. -
Compose and sending Email
To compose and send an Email:
- Touch the create icon to compose a new Email.
- Enter Email address (es) for intended recipient(s).
- Touch Attach file to attach a file.
- Touch Add Cc/Bcc to add copy or blind copy this Email to other contacts.
- After completing the Email, Touch send icon to send the Email. Touch folder icon to check the account status. For each Email account there are five default folders, i.e., Inbox, Drafts, Outbox, Send and Trash folders. To view sent Emails, open Sent folder and tap refresh icon.
FM Radio
Please plug in the compatible earphone to the device and then turn on the
radio. The earphone cable can be used as FM Antenna. Please adjust appropriate
volume when listening to the radio. Continue to use higher volume is harmful
for your ear.
Photos
Both pictures and videos taken by camera or stored in SD card can be scanned
through this function.
Google Play
Download thousands of apps on Google Play.
Appendix
Appendix 1: Troubleshooting
If you find exceptions when operating the mobile phone, restore the factory
settings and then refer to the following table to solve the problem. If the
problem persists, contact the distributor or service provider.
Fault | Cause | Solution |
---|
SIM card error
| The SIM card is damaged.| Contact your network service provider
The SIM card is not in position.|
Check the SIM card
The metal face of the SIM card is polluted.| Clean the SIM card with a clean cloth
Poor received signal quality
|
Signals are obstructed. For instance, radio waves cannot be effectively transmitted nearby a high building or in a basement.
|
Move to a place where signals can be effectively transmitted
Line congestions occur when you use the mobile phone in high-traffic hours|
Avoid using the mobile phone in high-traffic hours
The mobile
phone cannot be
|
The battery energy is exhausted.
|
Charge the battery
SPECIFIC ABSORPTION RATE (SAR) CERTIFICATION INFORMATION
This device meets international guidelines for exposure to radio waves This
device has been tested and found to comply with the Specific Absorption Rate
(SAR) RF exposure requirements set by international agencies. Google, Chrome,
Gmail, Google Play and other marks are trademarks of Google LLC.
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference.
- This device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
NOTE:
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
SAR Information Statement
Your wireless phone is a radio transmitter and receiver. It is designed and
manufactured not to exceed the emission limits for exposure to radiofrequency
(RF) energy set by the Federal Communications Commission of the U.S.
Government. These limits are part of comprehensive guidelines and establish
permitted levels of RF energy for the general population. The guidelines are
based on standards that were developed by independent scientific organizations
through periodic and thorough evaluations of scientific studies. The standards
include a substantial safety margin designed to assure the safety of all
persons, regardless of age and health. The exposure standard for wireless
mobile phones employs a unit of measurement known as the Specific Absorption
Rate or SAR. The SAR limit set by the FCC is 1.6 W/kg. Tests for SAR are
conducted with the phone transmitting at its highest certified power level in
all tested frequency bands. Although the SAR is determined at the highest
certified power level, the actual SAR level of the phone while operating can
be well below the maximum value. This is because the phone is designed to
operate at multiple power levels so as to use only the power required to reach
the network. In general, the closer you are to a wireless base station
antenna, the lower the power output. Before a phone model is available for
sale to the public, it must be tested and certified to the FCC that it does
not exceed the limit established by the government adopted a requirement for
safe exposure. The tests are performed in positions and locations (e.g., at
the ear and worn on the body) as required by the FCC for each model. The
highest SAR value for this model phone when tested for use at the ear is
1.369W/Kg and when worn on the body, as described in this user guide, is
0.602W/Kg(Body-worn measurements differ among phone models, depending upon
available accessories and FCC requirements). The maximum scaled SAR in hotspot
mode is 0.602W/Kg. While there may be differences between the SAR levels of
various phones and at various positions, they all meet the government
requirement for safe exposure. The FCC has granted an Equipment Authorization
for this model phone with all reported SAR levels evaluated as in compliance
with the FCC exposure guidelines. SAR information on this model phone is on
file with the FCC and can be found under the Display Grant section of
http://www.fcc.gov/oet/fccid after searching on
FCC ID: 2ABOSSKYELITEH5 Additional information on Specific Absorption Rates
(SAR) can be found on the Cellular Telecommunications Industry Association
(CTIA) website at http://www.wow-com.com. In the United States and Canada,
the SAR limit for mobile phones used by the public is 1.6 watts/kg (W/kg)
averaged over one gram of tissue. The standard incorporates a substantial
margin of safety to give additional protection for the public and to account
for any variations in measurements.
Body-worn Operation
This device was tested for typical body-worn operations. To comply with RF
exposure requirements, a minimum separation distance of 10mm must be
maintained between the user’s body and the handset, including the antenna.
Third-party belt-clips, holsters, and similar accessories used by this device
should not contain any metallic components. Body-worn accessories that do not
meet these requirements may not comply with RF exposure requirements and
should be avoided. Use only the supplied or an approved antenna.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>