PHILIPS BDP101 Town Guide Performer Instructions
- June 1, 2024
- Philips
Table of Contents
PHILIPS BDP101 Town Guide Performer
BDP101 LED50/830 II DS PCF GR 62P
TOWNGUIDE PERF BOWL, LED module 5000 lm, 830 warm white, Safety class II,
Distribution symmetrical, Polycarbonate bowl/cover frosted, Gray, Post-top for
diameter 62 mm The TownGuide Performer family consists of six recognizable,
yet modern shapes: Flat Cone, Bowl, Classic Cone, Classic T, T and Tzero. Each
luminaire has the option of a clear (PCC), translucent (PCTR) or frosted (PCF)
bowl (except Tzero, which is only available with a clear bowl).
With an extensive range of lumen packages, neutral white or warm white LED light sources, and a range of dedicated optics for lower mounting heights, it’s easy to select the version that best suits the specific requirements of your project. All this is combined with a long life expectancy of 100,000 operating hours. In addition, TownGuide Performer has a variety of control system options that can make this luminaire an integral part of smart energy reduction programs.
This includes LumiStep, DynaDimmer, LineSwitch standalone dim control, and Coded Mains group control, right up to seamless remote connectivity with Interact lighting management software. Installation is easy. Thanks to the bayonet whistle connector with an integrated gland located in the spigot, there’s no need to open the luminaire for installation. The Signify Service tag app offers direct access to all relevant data, ensuring maintenance is easy too. Philips has made every effort to make the Total Cost of Ownership (TCO) of the luminaire as attractive as possible. And as TownGuide Performer is a dedicated LED luminaire, compatible with a variety of control systems, there are significant energy and maintenance cost savings compared with conventional lighting.
Product data
General Information
- Lamp family code LED50 [LED module 5000 lm]
- Light source replaceable Yes
- Number of gear units 1 unit
- Driver included Yes
- Light source engine type LED
TownGuide Performer
- Service tag Yes
- Product family code BDP101 [TOWNGUIDE PERF BOWL]
- Lighting Technology LED
- Value ladder Performance
- Serviceability class Class A, luminaire is equipped with serviceable parts (when applicable): LED board, driver, control units, surge protection device, optics, front cover and mechanical parts
Light Technical
- Upward light output ratio 15
- Luminous Flux 3,000 lm
- Standard tilt angle post top 0°
- Standard tilt angle side entry –
- Luminous Efficacy (rated) (Nom) 73 lm/W
- Correlated Color Temperature (Nom) 3000 K
- Colour rendering index (CRI) 80
- Light source colour 830 warm white
- Optical cover type Polycarbonate bowl/cover frosted
- Luminaire light beam spread 75°
- Optic-type outdoor Distribution symmetrical
Operating and Electrical
- Input Voltage 220-240 V
- Line Frequency 50 to 60 Hz
- Inrush current 45 A
- Inrush time 0.285 ms
- Power Consumption 41 W
- Power Factor (Fraction) 0.96
- Connection Screw connection block 5-pole
- Cable –
- Number of products on MCB of 16 A type B 10
Temperature
Ambient temperature range -40 to +35 °C
Controls and Dimming
- Dimmable No
- Driver/power unit/transformer Power supply unit regulating
- Control interface –
- Constant light output No
Mechanical and Housing
- Housing Material Aluminum
- Reflector material –
- Optic material Acrylate
- Optical cover material Polycarbonate
- Fixation material Steel
- Housing Color Gray
- Mounting device Post-top for diameter 62 mm
- Optical cover shape Hemispherical flat
- Optical cover finish Frosted
- Overall length 570 mm
- Overall width 570 mm
- Overall height 293 mm
- Overall diameter 570 mm
- Effective projected area 0.095 m²
- Dimensions (Height x Width x Depth) 293 x 570 x 570 mm
Approval and Application
- Ingress protection code IP66 [Dust penetration-protected, jetproof]
- Mech. impact protection code IK10 [20 J vandal-resistant]
- Surge Protection (Common/Differential) Luminaire surge protection level until 6 kV
- differential mode and 6 kV common mode
- Sustainability rating Lighting for circularity
- Protection class IEC Safety class II
- CE mark Yes
- Warranty period 5 years
- Flammability mark –
- ENEC mark ENEC mark
- EU RoHS compliant Yes
Initial Performance (IEC Compliant)
- Luminous flux tolerance +/-7%
- Initial chromaticity (0.43, 0.40) SDCM <5
- Power consumption tolerance +/-10%
- Init. Colour Rendering Index Tolerance +/-2
Over Time Performance (IEC Compliant)
- Driver failure rate at 5000 h 0.5 %
- Control gear failure rate at median useful
- life 100000 h 10 %
- Lumen maintenance at median useful life* 100000 h 91
Application Conditions
- Performance ambient temperature Tq 25 °C
- Maximum dim level Not applicable
Product Data
- Order product name BDP101 LED50/830 II DS PCF GR 62P
- Full product name BDP101 LED50/830 II DS PCF GR 62P
- Full product code 871829190606300
- Order code 910925866275
- Material Nr. (12NC) 910925866275
- Net Weight (Piece) 6.730 kg
- EAN/UPC – Product/Case 8718291906063
- Numerator – Packs per outer box 1
- EAN/UPC – Case 8718291906063
2024 Signify Holding All rights reserved. Signify does not give any representation or warranty as to the accuracy or completeness of the information included herein and shall not be liable for any action in reliance thereon. The information presented in this document is not intended as any commercial offer and does not form part of any quotation or contract unless otherwise agreed by Signify. Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V.