THINKWARE H1RU Smart Audio Instruction Manual

THINKWARE H1RU Smart Audio

Specifications:

• Name: Smart Audio
• Model: H1RU R0.0.9
• Display: 12.3″ TFT LCD
• Operating System: Android OS
• Connectivity: Bluetooth, USB, Wi-Fi, GPS
• Features: Touchscreen, CarPlay, Android Auto, Rear View Camera support
• Audio Output: S-AUDIO output with 4 x 25W power output
• Certifications: FCC, CE, ANATEL, SUBTEL
• Languages: English, French, Italian, German, Spanish, Dutch, Russian, Turkish, Portuguese, Chinese
• Operational Voltage: 12V
• Operating Temperature: -20 to 70 degrees Celsius
• Storage Temperature: -30 to 80 degrees Celsius
• Relative Humidity: Up to 90%

Product Usage Instructions

1. Power On/Off:
   To power on the device, press and hold the power button until the screen lights up. To power off, press and hold the power button again and follow the on-screen prompts.

2. Connectivity:
   Connect your smartphone via Bluetooth or USB for phone calls, music streaming, and CarPlay/Android Auto functionality.

3. Audio Settings:
   Adjust the volume using the VOL+ and VOL- buttons. Mute or unmute audio by pressing the MUTE button. Change audio modes using the MODE button.

4. Navigation:
   Utilize the GPS function for navigation. Set destinations and follow on-screen directions.

5. Rear View Camera:
   To view the rear camera feed, engage the reverse gear. The display will automatically switch to show the rearview.

6. Radio:
   Access FM/AM radio stations by selecting the RADIO function. Use the SEEK UP/DOWN buttons to scan for available stations.

Product Overview

• Production type : LCD integrated type
• LCD : 12.3″ (1920 x 720) TFT LCD
• Silver Box: 1 DIN
• Touch type: Touchscreen
• Radio: AM/FM/RDS
• Function : USB(USB 2.0) 1CH, Bluetooth 4.2 , WI-FI, GPS
• AMP Type: Internal 4CH AMP
• RVC: HDEX (LVDS)
• Phone Connectivity: CarPlay (Wired/wireless), Android Auto(Wired)
• KEY: Full Touch KEY
• Accessory: S/Wheel Remote Control, Antenna (Radio), MIC (OdB)
• RVC: Rear View Camera

Product function composition diagram

HW (Hardware) Design Specification: Vehicle Interface Linkage- Connector

Additionally

ST_REMOCON IN : ADC Input

Product Design Specifications

HW Design Specifications

HW Design Specification: Product System Block Diagram

HW Design Specifications: Main components

Software Design Specifications: Several representative GUl drafts

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part tested and found for a Class B digital 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following hit can he measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment

RF warning for Mobile devices:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.

FAQ

Q: How do I update the device software?
A: Check the manufacturer’s website for software updates. Download the latest firmware onto a USB drive and follow the instructions to update the device.

Q: Can I customize the audio settings?
A: Yes, you can adjust the audio equalizer settings in the device’s menu to customize your listening experience.

Q: Is it possible to connect multiple devices simultaneously?
A: The device supports Bluetooth connectivity for multiple devices but can only connect to one device at a time for calls or music streaming.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>