Ruwora PD8-KBE Dehumidifier User Manual

Dehumidifier
User Manual
Model:PD8-KBE

IMPORTANT SAFETY INSTRUCTIONS

SAVE THESE INSTRUCTIONS / FOR HOUSEHOLD USE ONLY

1. BEFORE FIRST USE:
   To prevent any internal damage, it is very important to keep refrigeration units (like this one) upright throughout their journey. Please leave it standing upright and outside the box for 24 HOURS before plugging it in.
   

2. WARNING:
   To prevent injury to the user or other people and property damage, the following instructions must be followed when using the Dehumidifier.
   Incorrect operation due to ignoring instructions may cause harm, electric shock, fire, or damage.
   1. Do not exceed the rating of the power outlet or connected device.
   2. Do not yank a plugged-in cord directly out of the wall. Press the power off button on the control panel first, then plug out the device.
   3. Do not use it if the power cord is broken or damaged.
   4. Do not modify the power cord length or share the outlet with other appliances.
   5. Do not place a heavy object on the power cord and make sure that the cord is not compressed.
   6. Don’t pull or coil the power cord while operating the dehumidifier.
   7. Do not touch the plug with wet hands to avoid electric shock.
   8. Do not use the dehumidifier near flammable gas, combustibles, or chemical substances, such as gasoline, benzene, thinner, etc. to avoid fire or explosion.
   9. Do not place the dehumidifier near a heat source.
   10. Do not use in areas where chemicals are handled.
   11. Disconnect the power if strange sounds, smells, or smoke comes from the dehumidifier and contact Ruwora Customer Service in order to avoid a hazard, electric shock, fire.
   12. The dehumidifier must be placed on a smooth and stable surface, such as a level, sturdy section of the floor.
   13. Do not use the dehumidifier in small spaces.
   14. Do not take the water tank out while the dehumidifier is working.
   15.The water tank must be emptied when no use or before moving the dehumidifier.
   16. Please don’t disassemble the floating rod in the water tank.
   17. Do not drink or use the water drained from the dehumidifier.
   18. Make sure to turn off and unplug the dehumidifier before cleaning.
   19. Please don’t spray or moisten the dehumidifier with water while cleaning to avoid electric shock.
   20. Do not cover the intake or exhaust openings with cloths or towels.
   21. Since the fan blade in the dehumidifier can rotate at high speed. Never insert your finger, sticks, or other foreign objects into grills or the air outlet. Take special care to warn children of these dangers.
   22. Always insert the filters securely. Make sure to clean the filter once every month.
   28. If water enters the dehumidifier, turn the dehumidifier off, and disconnect the
   power, contact Ruwora Customer Service in order to avoid a hazard.
   24. Do not place flower vases or other water containers on top of the dehumidifier.
   (If they are overturned, the water enters into the dehumidifier may worsen the electrical insulation, which may cause electric shock,leakage current, or fire.)
   25. Please take a periodical inspection if the dehumidifier has operated for a long time.
   26. Don’t use the dehumidifier outdoors. Direct exposure to the sun or rain may cause it to superheated, get an electric shock, or fire.
   27.This dehumidifier can be used by children 8 years or older and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge with supervision or instruction concerning the use of the dehumidifier.
   Cleaning and user maintenance shall not be done by children without supervision.
   28. Do not climb on or sit on the dehumidifier or trample it.
   29.You should never try to take apart or repair the dehumidifier by yourself.
   30. If the dehumidifier is knocked over during use, turn off the dehumidifier and unplug it from the main power supply immediately. Visually inspect the dehumidifier to ensure there is no damage. If you suspect the dehumidifier has been damaged, contact Ruwora Customer Service for repair or replacement.
   31. Wait at least 10 minutes to turn your dehumidifier back on after it has been turned off. This will allow the pressure in the appliance to equalize fully, which can result in the prolonged life of your dehumidifier.

3. ELECTRICAL INFORMATION

4. Be sure the dehumidifier is properly grounded. To minimize shock and fire hazards, proper grounding is important.
   This power cord is equipped with a three-prong grounding plug for protection against shock hazards.

5. Your dehumidifier must be used in a properly grounded wall socket. If your wall socket is not adequately grounded or protected by a time-delay fuse or circuit breaker, have a qualified electrician install the proper socket.

6. Avoid fire hazards or electric shock. Do not use an extension cord or an adapter plug. Do not remove any prong from the/power cord.

7. Do not operate a dehumidifier with a damaged cord or plug, it must be replaced by the Ruwora . Please contact Ruwora Customer Service in order to avoid hazards.

8. In a thunderstorm, the power must be cut off to avoid damage to the dehumidifier due to lightning.

9. Do not run cord under carpeting. Do not cover the cord with throw rugs, runners, or similar coverings. Do not route the cord under furniture or other appliances. Arrange the cord away from the traffic area and where it will not be tripped over.

10. To reduce the risk of fire or electric shock, do not use this dehumidifier with any solid-state speed control device.

PARTS DESCRIPTION

1. FRONT
   

2. BACK
   
   

3. ACCESSORIES
   NOTE: Placed in the water tank of the dehumidifier.
   – Drain Hose ( 1pc ) 3.28ft/39.37 inch length.

– Air Purification Filter (2pc) — capture large particles such as dust, pet hair, and pollen. Usually dehumidifier comes with 1pcs filter, we send another free 1pcs for replacement in future.

CIFICATION

LRA:ZOA
Rated PoweroorFaiscate| 150W| Refrigerant| R134a/3.46oz (989)
Total Input Rated Current (104 ° F,35%RH)| 1| Maximum Allowable Pressure| 2.5MPa
Rated CaPacitYieswatwoRIO| 8 Pints/DaY| Maximum Operating Pressure High| 1.3MPa
Rated Capacityifisw,enam| 25Pints/Day| Maximum**

Pressure Low Operating

| 0.5MPa
IEF(65c,60%RH)| 1.57 L/kWh| |

OPERATION

1. PLACE CORRECTLY
   • This unit may have been tilted or placed upside down during shipping. To ensure this device works properly, please ensure this unit is upright for at least 24 hours before initial use.
   • Close all doors, windows, and other exterior openings of the room to improve the dehumidifying effect.
   • Keep the air outlet grille/intake grille clean and free of obstructions.
   • Avoid placing the unit in direct sunlight
   •  This dehumidifier is designed to operate with a working environment between 41°F (5°C) and 95°F (35°C).
   
   •  Place the dehumidifier on a smooth and level floor strong enough to support the unit with a full tank of water. Otherwise, it will make an abnormal noise or may tip over and spill water.
   •   Do not force casters to move over the carpet, or move the dehumidifier with water in the tank. The dehumidifier may tip over and spill water.
   •  If the dehumidifier gets interference from the household appliances, such as television and radio cassette player, please keep the equipment away from the dehumidifier for over 70cm.
   •   Verify that your dehumidifier sits in an area with at least 18 inches of free space around each of its air vents to allow for proper air circulation.
   

2. CONTROL PANEL
   

1.  Power ON/OFF Button
• Press to turn the dehumidifier ON and OFF.
WARNING:
• Press the power off button on the control panel first, then plug out the device.
Never yank a plugged-in cord directly out of the wall.
•  Wait at least 10 minutes to turn your dehumidifier back on after it has been turned off. This will allow the pressure in the appliance to equalize fully, which can result in the prolonged life of your dehumidifier.
2. Fan Speed Button
• Press to select either High or Low fan speed.
• Set the fan control to High for maximum moisture removal.
• When the humidity has been reduced and quiet operation is preferred, set the fan control to Low.
• The indicator corresponding to the fan speed will light up on the panel.
3. Timer Button
• Press to set the timing of Delay off and Delay on.
• Press the Timer button to change the timing of Delay-off or Delay on by a 1-hour increment up to 24 hours.
•Delay off-while the dehumidifier is in operation, first press the timer button, the timer indicator light will illuminate in the panel. Press the timer button continuously to have the unit power off later by 1-hour increment up to 24 hours.
• Delay on-while the dehumidifier is not on(but plugged in power) first press the timer button, the timer indicator light will illuminate in the main/round display screen. Press the timer button continuously to have the unit power on later by 1-hour
increment up to 24hours.
• If there is no operation within 5 seconds after pressing the timing button, the timer setting will automatically exit.
• In the state of timer setting, press the timing button again will display the current remaining time.
• If you want to cancel timing , please press timer button up to 00 until timer indicator light off, then timing will be canceled successfully. Or pressing the power key to turn off the unit before time finishes counting down, the setting timer will be canceled.
• While the timer run, the timer indicating light illuminates. After setting the timer , the display switch back to show the humidity.
4. Setting
Press setting button to choose dehumidification mode that you want, there are two modes with this dehumidifier, continuous dehumidification mode [ ] and comfort mode [ ]. of course you can setting humidity which to relative humidity 30%, 40%,
50%, 60%, 70%, 80%.

[ CO IContinuous Dehumidification Mode :

1. Press setting button, there is “ ” on LED screen and flash until display switch back to show the real humidity, it means dehumidifier is in continuous dehumidification  mode which will work continuously , you can adjust fan speed according to your needs.
2.  If you want to set humidity, press setting button again until you see“ ”on LED screen, continue to press setting button set humidity 30%, 40%, 50%, 60%, 70%, 80% in 10% increments.
3.  If you have setted the humidity and want to change to another, just press setting button, LED screen will show humidity number that you setted up, continue to press setting button set humidity that you want.

Tips: a) When the environment real humidity is 3% lower than the setted humidity, the compressor will automatically shut down, and the fan will continue until the environment real humidity is 3% higher than the setted humidity, and the compressor will work again. b) When the environment real humidity is lower than 35%, the LED screen will show”LO”, when the environment real humidity is higher than 90%, the LED screen will show”HI”.

[ AL 1Comfort Mode:
Press setting button, there is “ ” On LED screen and flash until LED display switch back to the real environment humidity, it means dehumidifier is in comfort mode.
you can adjust fan speed according to your needs and can not set humidity. The dehumidifier intelligently adjusts the humidity according to the external environment. 1) When environment temperature is higher than 80.6°F (27 C), dehumidifier will set the
humidity to 50% automatically. If the real environment humidity lower than 50%, the machine will not open dehumidification function, but the fan still work used to ventilation.  2) When environment temperature is higher than 68°F (20 C) and lower than 80.6°F (27 C), dehumidifier will set the humidity to 55% automatically. If the real environment humidity lower than 55%, the machine will not open dehumidification function, but the fan still work used to ventilation.
3) When environment temperature is higher than 41°F (5 C)and lower than 68°F (20 C), dehumidifier will set the humidity to 60% automatically. If the real environment humidity lower than 60%, the machine will not open dehumidification function, but the fan still work used to ventilation.
4) When environment temperature is lower than 41°F (5 C), the machine will stop working.
5. Full Water Indicate light:

• If the tank is full, missing or not installed correctly , the FULL Indicator Light become red on the panel as well you will hear three sound “bi…bi…bi” to remind you to empty or replace.

6. Auto Defrost Indicator Light

• Environment temperature drops when dehumidifier run, frost may form on the evaporator coils and prevent the unit form functioning properly.
•  At this time, the evaporator in dehumidifier will start to defrost automatically. In defrost, the Defrost indicator light will illuminate on the main display screen, the dehumidification function will power off, and the fan still run.
• The environment temperature between 41°F(5 C) to 53.6°F (12 C), the unit will start defrost for 10 minutes in every 30 minutes of operation.
• The environment temperature between 53.6°F (12 C) to 60.8°F(16 C), the unit will start defrost for 10 minutes every 45 minutes of operation.

3.How to Use a Dehumidifier Effectively

1.  Make sure that the windows and doors are closed while the dehumidifier is operating.
   

2. By placing the dehumidifier in the center of the room, you allow the air to circulate around the unit. Ideally, you should aim for about 18 inches of space around all sides of the unit.
   

3. If you are operating the dehumidifier in a large room, place it as close to the moisture source as possible.

4.  Don’t place your dehumidifier too close to any furniture. This can further restrict the airflow around the unit.
   

5.  Empty the collected water out of the dehumidifier after every use and before moving it to another room.

6. You can use this dehumidifier to where is very humidity, such as bathroom, basement or you can place it in your cloakroom to dry your clothes.

7.  Note: Do not use this operation when the outdoor temperature is equal to or less than 32°F (0°C), otherwise the water will freeze, causing the water hose to block up and the dehumidifier may be damaged. During the winter if it gets too cold, the water your machine collects could potentially freeze and damage it. So, you may want to consider dehumidifiers that rely on silica or charcoal desiccants.

8. It’s a good idea to vacuum your floors before you switch on your dehumidifier so that it doesn’t spread dust particles. This is particularly important if you already suffer from allergies.

9. You should set your dehumidifier to relative humidity levels of between 30% to 50%. Lower than 30%: Don’t use your dehumidifier. Use a humidifier instead. Remember that very low humidity isn’t healthy either and can increase the chances of viruses spreading around. Higher than 50%: Use your dehumidifier.
   

10.  Wash and dry air filter regularly. The filter cleans the air that flows through the dehumidifier, and when it’s dirty, your dehumidifier’s efficiency takes a hit.

NOTE: THE DEHUMIDIFIER PRODUCING WARM AIR IS NORMAL.

•  This dehumidifier doesn’t have a cooling function only decreases the humidity. So warm air coming from a dehumidifier is normal, it will produce heat during the operation and increase the room temperature to 1 to 5 C but it shouldn’t be too hot.
  This temperature rise may be very distinct in the cabinet or other similar spaces.

• Cause humid air is pulled into the dehumidifier and passes over refrigerated cooling coils, it takes a lot of energy to keep the coils refrigerated and the fan operating.
  This generated heat will constantly radiate out as the unit draws moisture out of the air to lower the humidity.

The 2 Drainage Ways

There are two ways to remove collected water:
1. Manual Drainage – Using The Water Tank
The dehumidifier can’t operate and the FULL Indicator Light flashes a red light on the display screen when the water in the tank is full.
Step 1: Grab both sides of the water tank and remove it from the unit following the arrow from top to bottom. Removing the tank slowly to avoid water leakage when tank is full.

Step 2: Empty the tank by supporting the bottom of the tank with two hands.

Step 3 : After emptying, replace the tank in the dehumidifier following the arrow direction from bottom to top. Confirm the tank is installed in position and the red Indicator light off.

• NOTE:

•  Replace the empty tank back into the unit and once seated correctly, please press power button, the unit will start up again.

•  You should hear a click when the tank is in the correct position.

• Do not remove the float in the tank, otherwise, the sensor will not be able to sense the water level properly, so that the water will overflow from the tank when the tank is full.
  

• Wipe the tank after every use clean with a damp cloth to prevent mildew.

• Be careful not to spill any of the dirty water as you dump it down a sink or outside.

• Do not drink or use the water drained from the dehumidifier.

2. Auto Drainage – Using The Drain Hose
Water can be automatically be emptied into a floor drain by attaching the dehumidifier to a water gravity drain hose (included) which attaches to a nozzle on the middle of the unit.
Step 1: Remove the water tank from the unit, you will see the connection of nozzle.

Step 2 : Thread the drain hose (included) onto the nozzle. Replace the water tank into the unit.

Step 3 : Position the gravity drain hose into the floor drain or other water receptacle. Ensure that the gravity drain hose is directed downwards.

NOTE:

•  Be sure to run the water hose sloping downward to let the water flow out smoothly. If the drain hose is directed upwards or horizontally, water will not exit the drain hose and instead will collect in the drain tank.
• Make sure the connection is tight and there is no leaking.
• Lead the water hose to the floor drain or a suitable drainage facility, the drainage facility should be lower than the drain outlet of the dehumidifier.
•  When the continuous drain feature is not being used, remove the drain hose from the outlet.

CARE & CLEANING

WARNING: Before cleaning, turn the dehumidifier off, then remove the plug with dry hands from the wall outlet to avoid electric shock.
Please face to the front of the unit to move the machine.

1. Clean the Tank
   •  Wipe the tank clean with a damp cloth every use to prevent mildew.
   • Clean the tank with water every two (2) weeks.
   • Do not use a dishwasher to clean the tank as this may warp the plastic.

2. Clean the Pre-Air Filter
   •  Remove the water tank and pull down the filter and clean the filter with clean water at least once every four (4) weeks.
   • Rinse thoroughly and air dry completely.
   • Do not operate the dehumidifier without a filter. Because dirt and lint will clog it and reduce performance.
   

3. Clean Machine Body
   • White Plastic Exterior: Wipe down the plastic areas by using a soft rag dipped in warm, soapy water.
   • Please always place the machine body upright to avoid misoperation and unusual sound.
   • Don’t clean the panel with a wet cloth.
   • Do not spray or douse the dehumidifier with water, and do not use volatile liquids (e.g. gasoline, paint thinner, etc.) to clean the dehumidifier.
   •  Do not use harsh chemicals (e.g. bleach) or abrasive pads.

4.  Storing the Dehumidifier
   When not using the dehumidifier for long time periods.
   •  After turning off the dehumidifier, wait one day before emptying the tank.
   •  Clean the main dehumidifier, tank, and air filter.
   •   Wrap the cord and bundle it with the band.
   •  Cover the dehumidifier with a plastic bag.
   •   Store the dehumidifier upright in a dry, well-ventilated place to avoid direct sunlight.

Energy Star certified it is fit for medium to large rooms, to quickly and effectively absorb moisture without racking up your energy bill.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>