ADAInstruments Wheel 100 Measuring Wheel User Manual
- June 1, 2024
- ADAInstruments
Table of Contents
ADAInstruments Wheel 100 Measuring Wheel User Manual
DESCRIPTION
ADVANTAGES
- Stable and convenient handle
- Large wheel allows to measure distances on rough surfaces (ground, road-metal)
- Foldable handle for easy and convenient carriage
- Pointer indicates start position
- Kickstand allows to place the tool if necessary
APPLICATION
Measuring wheel WHEEL 100 is your irreplaceable helper in:
- marking the road
- measurement and calculation of square
- measurement of the length of passed distance for estimating of expendable materials
- measurement of perimeters of buildings and fences
PREPARATION FOR OPERATION
Before starting to work, extend telescoping handle and carefully raise the handle clamp (see pic.) the handle is fixed. Zero counter readings. Measuring wheel is ready to operation.
WARRANTY
This product is warranted by the manufacturer to the original purchaser to be
free from defects in material and workmanship under normal use for a period of
two (2) years from the date of purchase. During the warranty period, and upon
proof of purchase, the product will be repaired or replaced (with the same or
similar model at manufactures option), without charge for either parts of
labour. In case of a defect please contact the dealer where you originally
purchased this product. The warranty will not apply to this product if it has
been misused, abused or altered. Withiut limiting the foregoing, leakage of
the battery, bending or dropping the unit are presumed to be defects resulting
from misuse or abuse.
EXCEPTIONS FROM RESPONSIBILITY
The user of this product is expected to follow the instructions given in
operators’ manual.
Although all instruments left our warehouse in perfect condition and
adjustment the user is expected to carry out periodic checks of the product’s
accuracy and general performance.
The manufacturer, or its representatives, assumes no responsibility of results
of a faulty or intentional usage or misuse including any direct, indirect,
consequential damage, and loss of profits.
The manufacturer, or its representatives, assumes no responsibility for
consequential damage, and loss of profits by any disaster (earthquake, storm,
flood …), fire, accident, or an act of a third party and/or a usage in other
than usual conditions.
The manufacturer, or its representatives, assumes no responsibility for any
damage, and loss of profits due to a change of data, loss of data and
interruption of business etc., caused by using the product or an unusable
product.
The manufacturer, or its representatives, assumes no responsibility for any
damage, and loss of profits caused by usage other thsn explained in the users’
manual.
The manufacturer, or its representatives, assumes no responsibility for damage
caused by wrong movement or action due to connecting with other products.
WARRANTY DOESN’T EXTEND TO FOLLOWING CASES:
- If the standard or serial product number will be changed, erased, removed or will be unreadable.
- Periodic maintenance, repair or changing parts as a result of their normal runout.
- All adaptations and modifications with the purpose of improvement and expansion of normal sphere of product application, mentioned in the service instruction, without tentative written agreement of the expert provider.
- Service by anyone other than an authorized service center.
- Damage to products or parts caused by misuse, including, without limitation, misapplication or negligence of the terms of service instruction.
- Power supply units, chargers, accessories, wearing parts.
- Products, damaged from mishandling, faulty adjustment, maintenance with low-quality and non-standard materials, presence of any liquids and foreign objects inside the product.
- Acts of God and/or actions of third persons.
- In case of unwarranted repair till the end of warranty period because of damages during the operation of the product, it’s transportation and storing, warranty doesn’t resume.
WARRANTY CARD
Name and model of the product
Serial number____ date of sale
Name of commercial organization stamp of commercial
organization
Warranty period for the instrument exploitation is 24 months after the date of
original retail purchase. It extends to the equipment, imported on the RF
territory by official importer.
During this warranty period the owner of the product has the right for the
free repair of his instrument in case of manufacturing defects.
Warranty is valid only with the original warranty card, fully and clear filled
(stamp or mark of the seller is obligatory).
Technical examination of instruments for fault identification which is under
the warranty, is made only in the authorized service center.
In no event shall manufacturer be liable before the client for direct or
consequential damages, loss of profit or any other damage which occur in the
result of the instrument outage.
The product is received in the state of operability, without any visible
damages, in full completeness. It is tested in my presence. I have no
complaints to the product quality. I am familiar with the conditions of
warranty service and I agree.
purchaser signature,_____
Before operating you should read service instruction!
Certificate of acceptance and sale
name and model of the instrument____ No
Corresponds to designation of standard and technical
requirements
Data of issue____
Stamp of quality control department
Price
Sold Date of sale__ name of commercial establishment 