Port Designs P13-20C FineDEE Charging Trolley User Manual
- October 30, 2023
- Port Designs
Table of Contents
Port Designs P13-20C FineDEE Charging Trolley
Introduction
Congratulations on your purchase FineDEE charging trolley.
Please read this User Manual, as it contains information about the wonderful
features of this Charging Trolley as well as some tips to make more enjoyable.
Important
Read this user manual carefully before you use the appliance. Save it for
future reference.
Danger
Make sure the AC power section (plug/socket) does not get wet.
General
The appliance is applied to AC input voltage range: 100~120VAC.
Specification
Charge
- Put the charging trolley on flat surface near an AC socket. Ensure the ventilation system not be covered.
- 0pen the charging trolley.
- Put laptops into the inner compartments of trolley, connect POU and laptops with the laptop chargers.
- lnsert the power cord plug into the external connector of charging trolley and connect the other end with AC socket.
- Press “I” to turn on the power and charge laptop.
Cleaning
- Always unplug the charging trolley before you clean it.
- Clean surface with a soft dry cloth.
Storage
Store charging trolley in the conditions of temperature -13- 122 and relative humidity 20-90% RH non-condensing.
Move and Transportation
- Press “O” to turn off the power
- Unplug the AC power cord and store it well.
- Disconnect the AC adapters with laptops.
- Close the charging trolley and lock latches.
Environment
Do not throw away the appliance as the normal household waste, but hand them in at an official collection point for recycling. By doing this, you help to preserve the environment.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>