PORT GUARD Deadbolt Lock Installation Guide
- October 30, 2023
- PORT
Table of Contents
GUARD Deadbolt Lock
Installation Guide
WHAT’S INCLUDED
| Bolt and strike | Exterior Assembly | Interior Assembly | Screws |
|---|---|---|---|
** What you’ll need
Phillips head Screwdriver
Note:** No drill needed
PRODUCT OVERVIEW
EXPLOSIVE VIEW
Adjust the backset of latch (if needed)
A Hold the bolt in front of the door hole, with the latch face flush against
door edge. B If the bolt holes are centered in the door hole, no adjustment is
required. Proceed to step 2. If the bolt holes are NOT centered, adjust latch.
See “bolt Adjustment.” C Latch adjustment t (only if needed) Install
Bolt
Install
front panel
Connect wire connector
Note: Cable goes below
deadbolt,The wire connectors can only be connected in one way.
Install back panel
Install batteries and battery cover
Adjust
lock direction
Note : If Left handle open door :
Choose 46# 123456# 1
If right handle open door: Choose :46#123456#2 After choose ,input 123456# to
check if lock unlock properly.
Insert the key and test the installation
Port Security System LLC
For any technical questions or support call us on: 800 – 219 – 2366
or email us on
Authority@portsmartlock.com
Visit us at: www.portsmartlock.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>