PHILIPS ART-571 Oximeter Coastcare Medical Hire Instructions
- June 1, 2024
- Philips
Table of Contents
PHILIPS ART-571 Oximeter Coastcare Medical Hire
Product Information
Specifications:
- Model: ART-571
- Battery Type: AAA
- Measurement: SpO2 and Pulse Rate
- Manufacturer: Telcare, LLC
Product Usage Instructions
Installing the Batteries:
- To remove the back cover compartment, push the white button and follow the direction of the printed arrows.
- Install two AAA batteries into the battery compartment. Match the plus (+) and minus (-) signs in the compartment. If the polarities are not matched, damage to the oximeter may occur.
- Slide the battery door cover horizontally in the direction of the arrow.
Taking a Measurement:
- Press the Power/Function button.
- Place one finger into the rubber hole of the oximeter (it is best to plug the finger thoroughly) before releasing the clamp, with the nail upward.
- The data (SpO2 and Pulse Rate) will appear on the device. Don’t move the finger; be sure to remain motionless during the reading.
- Once the measurement is finished, it will display “Thank you. Remove your finger.” The device will turn off automatically.
- Log into your portal to see your results today.
Contact Information:
Distributed by: Telcare, LLC
Address: 600 West Ridge Road Suite 200 Linwood, PA 19061 Phone:
888-666-4530 (US /EE.UU.) (1)
978-610-4688 (International)
Hours: Monday – Friday, 9AM – 9PM EST
Email: VCM-customercare@philips.com
Website:
www.philips.com/virtualcaremanagement
FAQ:
-
Q: How often should I replace the batteries?
A: It is recommended to replace the batteries when the device shows a low battery indicator or if the device fails to power on. -
Q: Can multiple users use the same device?
A: It is recommended for each user to have their device for accurate measurements and hygiene purposes.
Installing the batteries
If this is your first time using the device:
- To remove the back cover compartment, push the white button and follow the direction of the printed arrows.
- Install two AAA batteries into the battery compartment. Match the plus (+) and minus (-) signs in the compartment. If the polarities are not matched, damage to the oximeter may occur.
- Slide the battery door cover horizontally in the direction of the arrow.
Taking a measurement
- Press the Power/Function button.
- Place one finger into the rubber hole of the oximeter (it is best to plug the finger thoroughly) before releasing the clamp, with the nail upward.
- The data (SpO2 and Pulse Rate) will appear on the device. Don’t move the finger; be sure to remain motionless during the reading.
- Once the measurement is finished, it will display “Thank you”. Remove your finger. The device will turn off automatically.
- Log into your portal to see your results today.
Distributed by: Telcare, LLC600 West Ridge Road Suite 200 Linwood, PA
19061
Phone: 888-666-4530 (US /EE.UU.)(1)
978-610-4688 (International)
Monday – Friday, 9AM – 9PM EST
Email:
VCM-customercare@philips.com
www.philips.com/virtualcaremanagement
The Terms of Service (“Terms”) outline the terms regarding your use of our
products and can be found at
www.philips.com/virtualcaremanagement/terms.
If you do not agree with these Terms, do not register or use any of the
Services.
© 2023 Koninklijke Philips N.V. All rights reserved.