ZEBRONICS ZEB Dj Speaker User Manual

ZEBRONICS ZEB Dj Speaker

Thank you

Thank you for purchasing the ZEB-RISER DJ Speaker. Please read the user manual carefully before usage & save it for future reference.

Note

• Avoid the usage of this speaker at the high temperature and high humidity environment.
• Avoid the self-disassembly of the product as it results in the failure of Warranty.

Features

• Dual BT vS.0 I USB x 21 FM I AUX I HDMI {ARC)
• Guitar Input
• Dual 6.3mm MIC Input
• Karaoke & Recording
• Dual Wireless UHF MIC
• Remote Control
• Dual LED Controls
• LED Display
• Dynamic Visualizer
• Bass Boost
• TWS
• Fully Functional Media Control
• A-Z Mic Controls
• Karaoke Maker
• 3D EQ
• 3x DJ BGM Effects
• 12x Music Pitch Control
• 24x MIC Pitch Control
• Powerful 25.4cm Drive
• 21 OW RMS Output

Specifications

Package Content

• DJ Speaker : 1 U
• Remote : 1 U
• Wireless UHF MIC : 2 U
• QR Code Guide : 1 U
• Input Cable : 1 U
• Power Cable : 1 U
• FM Cable : 1 U

Overview of the Top control panel

1. Microphone 1 Volume Adjustment
2. Microphone 1 lnsertJack
3. Microphone 2 Volume Adjustment
4. Microphone 2 lnsertJack
5. Guitar Volume Adjustment
6. Guitar lnsertJack
7. USB2 lnsertJack
8. MIC EQ Select Button
9. REC Button
10. AUX Insert Jack
11. USB1 lnsertJack
12. Stop Button
13. Play Button
14. Backward Button
15. Next Button
16. Play/Pause Button
17. Forward Button
18. Previous Button
19. Display Window
20. Bluetooth Switch Button
21. Function/Mode Switch Button
22. 22.Tone(Bass/ Treble) Button
23. 3D EQ Preset
24. Repeat Button
25. Bass Boost Control
26. EQ Presets
27. Music Voice Volume Adjustment
28. Main Volume Control Rotary Knob
29. Microphone Voice O Button
30. LED Light Control Button
31. Microphone Voice- Button
32. Speaker Light Control Button
33. Standby Button
34. BGM 3 Button
35. TWS Button
36. BGM 2 Button
37. Vocal Button
38. BGM 1 Button
39. Microphone Priority Button
40. Microphone Voice+ Button
41. Microphone Echo Button
42. Microphone Tone Button
43. Microphone Reverb Button
    

Overview of the Rear Panel

1. HDMI ARC Jack
2. AC Power Input
3. FM Antenna
4. Power On/Off Button
   

Remote Control

1. Power ON/ Standby Button
2. Track 1 Numeric Button
3. Track 2 Numeric Button
4. Track 5 Numeric Button
5. Track 6 Numeric Button
6. Track 9 Numeric Button
7. Track 10 Numeric Button
8. Previous Track Button
9. Next Track Button
10. BT Function Button
11. Bass Boost Button
12. Repeat Button
13. Volume+ Button
14. FM Channel- Button
15. Volume- Button
16. Speaker LED Lights Control Button
17. BGM1 Button
18. Treble- Volume Button
19. BGM2 Button
20. Treble+ Volume Button
21. Mute Button
22. Track 4 Numeric Button
23. Track 3 Numeric Button
24. Track 8 Numeric Button
25. Track 7 Numeric Button
26. 3D Button
27. Track 10+ Numeric Button
28. Forward Button
29. Backward Button
30. Mode Switch Button
31. Microphone Priority Button
32. FM Channel+ Button
33. Play & Pause/ Search Button
34. LED Lights Control Button
35. BGM3 Button
36. EQ Switch Button
37. Bass+ Volume Button
38. Bass- Volume Button
    

Prepare the remote control

To insert the remote control batteries:

1.  Open the battery compartment.
2. Insert 2 x AAA batteries with correct polarity(+/-)as indicated. The 2xAAA battery not include in our products, please purchase from Authorized Seller.
3. Close the battery compartment.
   

Please Note

• If you are not going to use the remote for a longtime, remove the batteries.
• Do not use old and new or different type of batteries in combination.
• Batteries contain chemical substances, so they should be disposed of properly.

Turn On

1. Connect the AC power cable and plug to the wall socket;
2. Press the “POWER” button to the “ON” status to power on the speaker.
3. Press the “STANDBY” button on the top panel to turn on the speaker ..

Caution

If you do not use this unit for a while, please switch the “POWER” button to “OFF” status.
and disconnect the AC power cable of this unit.

Play

Basic key play operations

You can control play through following operations.

AUX

| AUX input Connect to external device through Aux-in cable.

USB/B INPUT SV 300mA

| USB1 Input

Connect USB memory devices to play compatible Mp3files.
The Recording function only work with this USB1 inserted if operate REC function.
The maximum supported USB device size is 64 GB.

USB/A INPUT 5V 300mA

| USB2 Input

Connect USB memory devices to play compatible MP3 files.
This USB2 not work for the recording.
The maximum supported USB device size is 64GB.

| Turn GUITAR VOL knob to adjust the sound level of guitar.
| Turn MIC1 VOU MIC2 VOL knob to adjust the sound level of microphone.

GUITAR

| Insert the 6.3 Guitar to the GUITAR input
| Insert the 6.3 wired microphone to the MIC1 / MIC2jack
| Press this MIC TONE button to select the bass and treble of microphone, then turn the main volume knob to increase or decrease the bass and treble level of microphone.
| Press this the MIC EQ button to select the EQ settings of the microphone. MIC EQ settings: (C1) K1V – (C2) MEETING – (C3) INDOOR – (C4) OUTDOOR.
| Press this ECHO button to turn on the microphone echo, then turn the main volume knob to adjust the echo of microphone.
| Press this REVERS button to turn on the microphone reverb, then turn the main volume knob to adjust the reverb of microphone.

Notes:

If not press REVERS button again or not turn MAIN VOL knob again, the machine will exit the REVERS adjust after 25.
2.The indicator light of button center keep flashing in orange if the Reverb function is under working, if not working will keep static.

| Press this button to switch between different light effects. There are total 8 light modes for your selection
| Press the BMG1, BGM2, BGM3 button to select the background sound effect.
| Press this BASS button to turn on/off the “Bass Boost” effect. *Button light will keep flashing in red when turn on the bass boost and will keep static in red when turn off the bass boost.
Note: Bass will turn off when any EQ modes is selected.
| Press this button to pause the music, press again to resume play. In FM mode, press this button to automatically search and save the radio stations.
| MUSIC VOICE : Press this button and button light will keep flashing in red, slide the knob to increase/reduce pitch of any song to match the singer’s comfortable voice range.
| Press this button to next track in USB/BT mode.
Press this button to next station in FM mode.
| Press this button to previous track in USB/BT mode.
Press this button to previous station in FM mode.
| Long Press this button to go backward in the track of BT/USB mode.
| Long Press this button to fast forward in the track of BT/USB mode.
| Press this button to activate the karaoke Maker function.
| Press this button to open the microphone priority when using the microphone.
| Press this REC button to start the recording music and MIC source to a connected USB device when in BT/FM/AUX/USB mode. The display will show “REC” and REC button light will keep flashing in red. Note: Recording function will work only with the USB1 is inserted.
| MIC VOICE(+)

1. Press this VOICE+ button to increase the pitch of the human voice from the microphone.
   Press one time for one level, there are 12 levels can be selected.3.
   When this function working, the button light will keep flashing in blue and after 2 seconds will keep static in blue.

| Press this VOICE O button to recovery the human voice from the microphone.
| Press this 1WS to turn on or off1WS pairing mode. The button light will keep flashing in white once turn on.
Note: 1WS function can work only for the BT2 mode, BT1 won’t work.
| MIC VOICE(-)

1. Press this VOICE – button to reduce the pitch of the human voice from the microphone.
1. Press one time for one level, there are 12 levels can be selected 3.
When this function working, the button light will keep flashing in blue and after 2 seconds will keep static in blue.

| Press this STOP button to exit while recording or playing back the recorded file.
| Press this button to play the content recorded on USB, the button light will keep flashing in green.
|

1. Press this button to switch the spectrum effect of lights on middle of the control panel.
2. There are 12 light modes for your selection. L-01 mode is automatic switching mode, will switch from mode L-01 to mode L-12. Swith to L-OF mode will turn off the lights .

| Press this button to turn on the 3D sound effect, the display will show ON, press again to turn off the effect .
| Press this button and turn the main volume knob to adjust the music Bass or Treble effect.
| Press this button to switch between ROCK, FLAT, CLASSIC, JAZZ, POP EQ modes.
| Press this button repeatedly to repeat single song or repeat all songs in USB function.

The display will show: ONE, ALL, OFF.

| Press this button to switch between BT1 /USB1 /BT2/USB2/ ARC/ AUX/FM modes.
| Press this BT button to switch Bluetooth1 or Bluetooth2 mode.
| Turn the MAIN VOL knob to adjust the music volume.

Play from use

Make sure that the USB storage device containers playable audio in supported MP3 format.

Instruction:

1. Insert the USB device into the “USB1” or “USB2” slot on the top panel.
2. Press “F/MODE” button on the top control panel or “MODE” button on the remote control to switch to USB mode when in another mode.
3. Press or key to select.
4. Press key to play or pause.
5. Long press to go backward or to fast forward in the track.

Listen to radio

Note

• Make sure that you have connected and fully extended the supplied FM antenna cable

Instructions:

1. lnsert the FM Antenna Cable into the FM ANT jack on the rear panel.
2. Press “MODE” button on the top control panel or press “MODE” button on the remote control to switch to FM mode.
3. Press the PLAY/PAUSE button on the top panel or the remote control to search and save the audio stations automatically.
4. 4.Press on the top panel or the on the remote control to select different frequency.
5. Press on the top panel or the CH-/ CH+ on the remote control to select the saved radio stations.
   

Connect with Bluetooth

Instructions:

1. Press “MODE” button on the top control panel or press “MODE” button on the remote control to switch to BT connect mode. “BT1 or BT2” will be displayed on the display screen.
2. 0pen the BT function on your external device and Search for “ZEB-RISER A” or “ZEB-RISER B” and connect.
3. 0nce connected, a small tone will be heard from the speaker.
4. You can use the ion the top panel or the on the remote control to control the tracks of the external device.
   Note: no password needed for connecting.

TWS Function

*Note: TWS function can work only for the BT2 mode, BT1 won’t work.
If you have two ZEB-RISER speakers, you can use them together enjoy stereo sound effect. Instructions:

1. Power on and switch both speakers to BT2 mode, don’t connect.
2. Press the TWS button on both speakers to activate TWS pairing mode, the button light will keep flashing.
3. The TWS will pair automatically and you will hear the tone indicating pairing successfully.
4. The main speaker will display “BLUE” and the second speaker will display “TWS once paired successfully.
5. Turn on your BT audio device and search “ZEB-RISER B” to connect BT, then play music.
6. Press the TWS button to Disable TWS paired mode.

Connect with Line in Instructions

1. Press “MODE” button on the top control panel or press “MODE” button on the remote control to switch to the AUX mode.
2. (LINE) will be displayed on the display screen.
3. Connect the audio source/external device with a supplied AUX-in cable.
4. 0nce connected, turn on your external device’s music.
5. AII playback will be controlled by your external device.

Caution: Please turn off the unit before connecting the AUX cable in order to avoiding unexpected noise.
![Connect with Line in

Instructions](https://manuals.plus/wp-content/uploads/2024/05/ZEBRONICS-ZEB- Dj-Speaker-User-Manual-58.png)

Connect with Wired Microphone/Guitar

Insert 6.3mm wired microphone/guitar to MIC1/MIC2/GUITAR jack.

Turn the MIC1 VOU MIC2 VOU GUITAR VOL knobs to adjust the volume of the microphone/guitar.

Press MIC TONE(bass and treble)/ ECHO/ REVERB/ EQ to adjust the volume or effect of microphone.

Press this MIC PRI to turn on the priority of microphone.

Press the corresponding voice button to adjust the voice effect of microphone.

CUSTOMER SUPPORT

ISO 9001:2015 Certified Company
www.zebronics.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>