tecnoeka MKFA 711 S Seven Tray Gn 1 1 Combi Oven Owner’s Manual
- June 14, 2024
- tecnoeka
Table of Contents
**tecnoeka MKFA 711 S Seven Tray Gn 1 1 Combi Oven Owner’s Manual
**
FEATURES
- (7) GN 1/1 (hotel/12”x20”) tray capacity with 2 21/32” pitch
- (7) Half-size (13”x18”) tray capacity (on grids)
- Water/Drain Installation kit INCLUDED
- (7) GN 1/1 stainless-steel grids INCLUDED
- Temperature range 86o F to 518o F
- (2) Bi-directional auto-reversing fans
- AISI 304 stainless-steel cooking chamber
- Right-hinged (left-opening) door
- Door rests at 60°, 90°, 120°, 180°
- Stackable with MKFA 711 or MKFA 511 oven
- Adjustable feet
- Extended warranty options available
Conforms to the following standards:
- Standard safety UL 197
- CSA C 22.2 No. 109:2017
- Sanitation NSF / ANSI 4-2020
DIMENSIONS: NET
| Width | 28.74 in | 31 in |
|---|---|---|
| Depth | 33.84 in | 36 in |
| Height | 35.20 in | 41 in |
| Weight | 197.5 lb | 249 lb |
UTILITY CONNECTIONS
All utility connections should be within three feet of the centerline of the back of the oven when installed. Water supply: 1/2” cold-water supply (max 86oF) with supplied 1/2” NPT, 3/4” NPT or 3/4” GH/NHR connection.
Water pressure: Max supply pressure before regulator: 125 psi. Pressure at oven water inlet: 15-30 psi (install kit contains one 30psi regulator).
Drain size should be a minimum of 1” diameter into either a cup or floor drain with an 1” air gap
ELECTRICAL
Power: 15.8-18.2kW
Frequency: 60 Hz
Voltage (V) : AC 208/240v 3-phase
L1: 43 amps
L2: 42 amps
L3: 42 amps
Cable: NOT SUPPLIED
Plug: NOT SUPPLIED
Breaker size: 60A (recommended)
WATER QUALITY SPECIFICATIONS
| Free Chlorine: | < 0.1 | ppm |
|---|---|---|
| Hardness: | 30-70 | ppm |
| Chloride: | < 30 | ppm |
| Total Dissolved Solids: | 50-125 | ppm |
| Silica: | < 12 | ppm |
| pH: | 7.0 – 8.5 | |
| Chloramine | < 0.1 | ppm |
| Alkalinity | < 150 | ppm |
AVAILABLE OPTIONS AND ACCESSORIES
Table – standard height for GN1/1 ovens: MKTS 11
Floor stand for stacked GN1/1 ovens: MKT 11 D
4” Mounting/stacking kit for GN1/1 ovens: MKSA 11
GN1/1 Mounting kit w/ lateral supports : MKSST 511
Set of four (2 with brake) casters: MKKR
GN1/1 stainless-steel grid : KG9GX
Spray kit with support and tube : EKKD
DIMENSIONS
Oven must be installed a minimum of 19.7” (500 mm) from any significant source of heat and/or grease (for example: fryers, burners, kettles, open flames, etc.)
Other surfaces must maintain a minimum of 3.94” (100mm) clearance.
Tecnoeka is not responsible for damage to the oven caused by any external heat source.
Tecnoeka, Inc.
3385 Denver Drive
Denver, North Carolina 28037
Tecnoeka, Inc.
3385 Denver Drive
Denver, North Carolina 28037
Web Site:www.tecnoeka.com
E-mail:info.usa@tecnoeka.com
Toll Free: 888-626-EKA1 (3521)