Juniper NETWORKS AP24 Access Point Installation Guide

Juniper NETWORKS AP24 Access Point

Product Information

• The Mist AP24 is a hardware device that functions as an access point for wireless networks. It is equipped with three IEEE 802.11ax radios, which support 2×2 MIMO with two spatial streams in multi-user (MU) or single-user (SU) mode. The AP24 can operate simultaneously in the 6GHz band, 5GHz band, and 2.4GHz band, or two bands and a dedicated tri-band scan radio.
• The AP24 features several I/O ports, including a reset button, USB 2.0 support interface, and an Ethernet port (Eth0+PoE) that supports 100/1000/2500/5000BASE-T RJ45 with 802.3at/802.3bt PoE PD capabilities.
• For installation, the AP24 can be wall-mounted using screws with a 1/4in. (6.3mm) diameter head and a length of at least 2 in. (50.8mm). The AP24 box includes an APBR-U set screw and an eyehook for this purpose. Additionally, the AP24 can be mounted on a threaded rod adapter that is compatible with rod sizes of 1/2-13, 5/8-11, or M16-2.
• Technical specifications of the AP24 include power options of 802.3at/802.3bt PoE, dimensions of 185mm x 185mm x 39mm (7.28in x 7.28in x 1.54in), and an operating weight. The device operates within a specified temperature range and humidity level and has a maximum operating altitude. It complies with safety standards such as FCC Part 15 Class B and UL 62368-1, among others. The AP24 also features a multi-color status LED indicator.
• The AP24 family of Access Points comes with a limited lifetime warranty.

Product Usage Instructions

1. Choose the appropriate location for the AP24 installation, ensuring it is within range of the desired wireless network coverage.
2. If wall-mounting, use screws with a 1/4in. (6.3mm) diameter head and a length of at least 2 in. (50.8mm). Attach the APBR-U set screw and eyehook included in the AP24 box to securely mount the device.
3. If using a threaded rod adapter, ensure the rod size is compatible with the APBR-ADP-T58 (5/8-inch), APBR-ADP-M16 (16mm), or APBR-ADP-T12 (1/2-inch) adapters. Attach the adapter to the threaded rod and secure it in place.

Note: For detailed configuration and management of the AP24, refer to the full user manual provided with the device.

AP24 Hardware Installation Guide

Overview

The Mist AP24 contains three IEEE 802.11ax radios that deliver 2×2 MIMO with two spatial streams when operating in multi-user (MU) or single-user (SU) mode. The AP24 is capable of operating simultaneously in the 6GHz band, 5GHz band, and 2.4GHz band or two bands and a dedicated tri-band scan radio.

I/O ports

802.3at/802.3bt PoE PD

AP24 Mounting

• In a wall mount installation, please use screws that have a 1/4in. (6.3mm) diameter head with a length at least 2 in. (50.8mm).
• APBR-U that is in the AP24 box includes a set screw and an eyehook.

Mounting to a 9/16 inch or 15/16 inch T-bar

1. Step1. Mount APBR-U to the t-bar
2. Step2. Rotate APBR-U to lock to the t-bar
3. Step3. Slide the AP with shoulder screws on the APBR-U until the lock is engaged

US single gang, 3.5 or 4 inch round junction box

1. Step 1 Mount APBR-U to the box using two screws and the #1 holes. Make sure Ethernet cable extends thru the bracket.
2. Step 2 Slide the AP with shoulder screws on the APBR-U until the lock is engaged

US double gang junction box

1. Step 1 Mount APBR-U to the box using two screws and the #2 holes. Make sure Ethernet cable extends thru the bracket.
2. Step 2 Slide the AP with shoulder screws on the APBR-U until the lock is engaged

US 4 inch square junction box

1. Step 1 Mount APBR-U to the box using two screws and the #3 holes. Make sure Ethernet cable extends thru the bracket.
2. Step 2 Slide the AP with shoulder screws on the APBR-U until the lock is engaged

EU junction box

1. Step 1 Mount APBR-U to the box using two screws and the #4 holes. Make sure Ethernet cable extends thru the bracket.
2. Step 2 Slide the AP with shoulder screws on the APBR-U until the lock is engaged

Recessed 15/16 inch T-bar

1. Step 1 Mount the APBR-ADP-RT15 to the t-bar
2. Step 2 Mount the APBR-U to the APBR-ADP-RT15. Rotate the APBR-U to lock to the APBR- ADP-RT15
3. Step 3 Slide the AP with shoulder screws on the APBR-U until the lock is engaged

Recessed 9/16 inch T-bar or channel rail

1. Step 1 Mount the APBR-ADP-CR9 to the t-bar
2. Step 2 Mount the APBR-U to the APBR-ADP-CR9. Rotate the APBR-U to lock to the APBR ADP-CR9
3. Step 3 Slide the AP with shoulder screws on the APBR-U unti the lock is engaged
   

1.5 inch T-bar

1. Step 1 Mount the APBR-ADP-WS15 to the t-bar
2. Step 2 Mount the APBR-U to the APBR-ADP-WS15. Rotate the APBR-U to lock to the APBR-ADP-WS15
3. Step 3 Slide the AP with shoulder screws on the APBR-U until the lock is engaged

Threaded rod adapter (1/2″, 5/8″, or M16)

1. Step 1 Install the APBR-ADP-T12 to the APBR-U. Rotate to lock.
2. Step 2 Secure the APBR-ADP-T12 to the APBR-U with the provided screw
3. Step 3 Install the bracket assembly to the 1/2″ threaded rod and secure with the provided lock washer and nut.
4. Step 4 Slide the AP with shoulder screws on the APBR-U until the lock is engaged

The same instructions work for the APBR-ADP-T58 or APBR-ADP-M16

The threaded rod adapter attaches to a rod that is either 1/2″-13, 5/8”-11, or M16-2.

Technical Specifications

• 2.4GHz or 6GHz – 2×2:2SS 802.11ax MU-MIMO & SU-MIMO
• 5GHz – 2×2:2SS 802.11ax MU-MIMO & SU-MIMO
• 2GHz 2×2:2SS 802.11ax MU-MIMO & SU-MIMO or 1×1: 1SS
• 802.11ax 2.4GHz/5GHz/6GHz scan
• 2.4GHz BLE with Omni Antenna

Maximum PHY rate| Total maximum PHY rate – 4200 Mbps 6GHz – 2400 Mbps

• 5GHz – 1200 Mbps
• 2.4GHz – 600 Mbps

Indicators| Multi-color status LED
Safety standards|

• UL 62368-1
• CAN/CSA-C22.2 No. 62368-1-14
• UL 2043
• ICES-003:2020 Issue 7, Class B (Canada)

Suitable for use in environmental air space in accordance with Section 300-22(C) of the National Electrical Code, and Sections 2-128, 12-010(3), and 12-100 of the Canadian Electrical Code, Part 1, CSA C22.1.

Warranty Information

The AP24 family of Access Points comes with a limited lifetime warranty.

Ordering Information:
Access Points

Mounting brackets

APBR-U| Universal AP Bracket for T-Rail and Drywall mounting for Indoor Access Points
---|---
APBR-ADP-T58| Adapter for 5/8-inch threaded rod bracket
APBR-ADP-M16| Adapter for 16mm threaded rod bracket
APBR-ADP-T12| Adapter for 1/2-inch threaded rod bracket
APBR-ADP-CR9| Adapter for channel rail and recessed 9/16” t-rail
APBR-ADP-RT15| Adapter for recessed 15/16″ t-rail
APBR-ADP-WS15| Adapter for recessed 1.5″ t-rail

Power Supply options
802.3at or 802.3bt PoE power

Regulatory Compliance Information

• This product and all interconnected equipment must be installed indoors within the same building, including the associated LAN connections as defined by the 802.3at Standard.
• Operations in the 5.15GHz – 5.35GHz band are restricted to indoor usage only.
• If you need further assistance with purchasing the power source, please contact Juniper Networks, Inc.

FCC Requirement for Operation in the United States of

• America:
  • FCC Part 15.247, 15.407, 15.107, and 15.109

FCC Guideline for Human Exposure

• This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance between the radiator & your body; AP24 – 20cm
• This device complies with Part 15 of the FCC Rules.

Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

• This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:
  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

FCC Caution

• Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.
• This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
• For operation within 5.15 ~ 5.25GHz / 5.47 ~5.725GHz / 5.925 ~ 7.125GHz frequency range, it is restricted to indoor environment.
• The 5.925 ~ 7.125GHz operation of this device is prohibited on oil platforms, cars, trains, boats, and aircraft, except that operation of this device is permitted in large aircraft while flying above 10,000 feet.
• Operation of transmitters in the 5.925-7.125 GHz band is prohibited for control of or Communications with unmanned aircraft systems.

Industry Canada

• This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s license-exempt RSS(s). Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

IC Caution

1. The device for operation in the band 5150-5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems;
2. The maximum antenna gain permitted for devices in the bands 5250-5350 MHz and 5470-5725 MHz shall be such that the equipment still complies with the e.i.r.p. limit;
3. The maximum antenna gain permitted for devices in the band 5725-5850 MHz shall be such that the equipment still complies with the e.i.r.p. limits specified for point-to-point and non-point-to-point operation as appropriate; and
4. Operation shall be limited to indoor use only.
5. Operation on oil platforms, cars, trains, boats and aircraft shall be prohibited except for on large aircraft flying above 10,000 ft.

Radiation Exposure Statement:
This equipment complies with IC RSS-102 radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm (AP24) between the radiator & your body.

AP24 Hardware Installation Guide
Juniper Networks (C) Copyright 2022-2023. All Rights Reserved

References

• Support - Mist

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>