Elefesign WF313812 30 Inch Bathroom Vanity Cabinet Instruction Manual
- June 1, 2024
- Elefesign
Table of Contents
ASSEMBLY INSRTRUCTION
BAUANLEITUNG
WF313812
Before Installation
Important -Please read these instructions fully before starting assembly
Thank you for purchasing this quality product. Be sure to check all packing
materials carefully for small parts, which may have come loose inside the
carton during shipment. Identify and count all items according to the PARTS
LIST and/or HARDWARE LIST shown below. Check you have all the components and
tools listed on the following pages.
- We recommend that you assemble this product with the assistance of another person; this willmake the assembly easier, and will help eliminate damage to the product or injury to persons duringassembly.
- Please do not over tighten screws or bolts until the assembly is completed.
- Keep children and animal away from the work area, small parts could choke if swallowed.
- Please put all parts on a non-abrasive floor before assembly,and follow the assembly steps toassemble your newly purchased product correctly and efficently.
Cam Lock Assembly Instructions
| Insert Cam Bolt into hole as shown in diagram A.
---|---
Make sure not to insert the Cam Bolt:
Too deep as shown in figure Bas this will cause he Cam Lock to be misaligned
and unable to nterlock properly.
Also avoid inserting the Cam Bolt too close to the surface of the hole as
shown in figure C, as this will cause the Cam Lock to be too loose, and not
interlock properly.
Connect the panels together.
Insert the Cam Lock so the side opening fits over the head of the Cam Bolt.
To tighten the Cam Lock, turn it clockwise on half a turn with a flat
screwdriver.
*Do not use an automatic screwdriver as it maybend or break if too much power is imposed. 
Slides Must Be Separated Before Assembly.
After Separated, Set Aside Until Needed for Assembly.
