Dardoo GS82 Racing Simulator Stand Instruction Manual
- June 17, 2024
- Dardoo
Table of Contents
Dardoo GS82 Racing Simulator Stand
Product Information
The GS82 Racing Simulator Stand is a high-quality stand designed to enhance your racing simulation experience. It is made from durable aluminum alloy and comes with various accessories to ensure stability and adjustability.
Specifications
- Length(8-4040C): 800mm
- Aluminum alloy corner: 6.0mm
- Distance between two fixed brackets: 338mm
Product Usage Instructions
Assembly Processes
To assemble the GS82 Racing Simulator Stand, follow these steps:
Step 1: Attach Spring Nuts
There are different quantities of spring nuts required for different slots.
Follow the instructions below:
- For the first slot, embed 2 M8 spring nuts.
- For the second slot, also embed 2 M8 spring nuts.
- For the third slot, embed 4 M8 spring nuts.
Step 2: Connect Aluminum Alloy Corners
Connect the aluminum alloy corners to the spring nuts embedded in the slots.
There should be a total of 8 M8 shims used for this step.
Step 3: Attach Straight Connectors
Attach the 4 straight connectors to complete the frame structure. Ensure that
the distance between two fixed brackets is 338mm.
Accessories Explanation
Assembly Processes
- Assembly fixing bracket with 8 pieces of the bolt(M8×16 ) 、8 pieces of the shim (M8) 、12 pieces of the Spring nut (M8) and 4 pieces of Aluminum alloy corner
- Connect the monitor bracket to your racing wheel stand with 16 pieces of the Tightening bolt(M8×10 ) 、4 pieces of the Straight Connector
- Assembling the monitor bracket with 4 pieces of Spring nut(M8)、 4 pieces of Bolt (M8×16) and 4 pieces of Shim (M8)
FAQ
What is the length of the GS82 Racing Simulator Stand?
The length of the stand is 800mm.
How thick is the aluminum alloy corner?
The aluminum alloy corner has a thickness of 6.0mm.
What is the distance between two fixed brackets?
The distance between two fixed brackets is 338mm.