SONDONWEAR L81B Smart Watch Instruction Manual
- August 9, 2024
- SONDONWEAR
Table of Contents
SONDONWEAR L81B Smart Watch
- Please read this manual before using this product
-
Open the package and take out the watch
-
Long press the Circular encoder to turn the smartwatch on
Watch the client download and connect -
Scan the QR code with your phone to open FitCloudPro on your phone to set up your device
Scan the QR code above to download the client
-
Down load “FitCloud Pro” APP It can be downloaded and installed on the mobile phone by scanning the QR code on the manual, scanning the built-in QR code of the watch, or directly searching “FitCloudPro” in the stores.
-
Connect the Watch
-
Scan code connection: After Bluetooth is enabled on the mobile phone, enter the APP {Note: If the APP cannot be opened, please open the positioning and then open the APP) and click Device-> Add Device-> click Scan code binding (scan the QR code on the watch).
-
Manual connection: After Bluetooth is enabled on the mobile phone, enter the APP {Note: If the APP cannot be opened, Click Device->
Add Device-> Click Search Device (find the device with the corresponding Bluetooth name and MAC address in “Settings”-> “System”-> “System Information” in the sliding control center of the watch)-> click Connect. -
Connect Bluetooth for calls: When the watch is in the initial state, Bluetooth for calls is enabled by default.
-
Mobile Android system: After the watch is successfully connected to the APP, the mobile terminal will prompt the watch to request Bluetooth pairing- click pairing- Talk Bluetooth connection success, you can dial and talk after the connection is successful.
-
Mobile iOS system: After the watch is successfully connected to the APP, the Bluetooth will automatically connect to the mobile phone. After the connection is successful, you can dial and talk. {Note: In the initial state of the watch, the media audio is turned off by default. Media audio opening method: Slide down from the main interface of the watch face {Control Center) – Click the phone icon – there are two options (call audio/media audio) – click the media audio, and the watch can play mobile music after opening.
Charging and Activation
The magnetic charger and the magnetic suction hole on the back of the watch aligned fit, until the watch screen appears charging prompt, when the watch prompts low power, please charge in time, the device is an all-in-one machine, the back shell and battery can not be removed.
Watch operation instruction
Dial page
Long press the screen and enter the dial to select the page. You can switch
the dial on the left or right. (Note: The system presets 6 tables and pages,
and the last dial is “customized”. This dial will change with the download
settings of the dial market and custom dial on the APP side)
Menu page
Press the Circular encoder on the dial page to enter the menu page. After
entering the menu page, press the Circular encoder to switch the menu style
twice in a row.
Function page
Click on the application icon to enter the corresponding function on the menu
page, return to the right, and press the Circular encoder to return to the
main table pages alone.
Buttons and touch controls
Watch Function Introduction
Alarm
After the watch is connected to the APP, you can set a single alarm clock, a
cycle alarm clock, and up to 5 alarm clocks in the APP terminal.
Stopwatch
Click the Start button to time the start, click the pause button to time the
pause, and click the reset button to time zero. A maximum of 99 pieces of data
can be saved.
Breath training
In breathing exercises, there is a choice between 1 minute and 2 minutes. The
user taps the corresponding time for breathing training. After clicking Start,
follow the icon in the breathing exercise to zoom in and inhale, zoom out, and
exhale.
Blood pressure
When entering the blood pressure measurement interface, the green light at the
bottom will start the test and there will be a vibration reminder when the
measurement is completed within 30 to 60 seconds.
Female
After the watch is connected to the APP, women’s health alerts can be enabled
on the APP to view women’s health alerts on the watch.
Heart rate
When entering the heart rate measurement interface, the bottom of the green
light starts to measure. When the measurement is completed in about 40
seconds, there will be a vibration reminder. If you prompt,” Please wear a
watch correctly”, you need to wear a watch.
Blood oxygen
When entering the blood oxygen measurement interface, the red light at the
bottom will start the test and there will be a vibration reminder when the
measurement is completed within 30~60 seconds.
Movement
Sport mode options: walking, running, riding, climbing, badminton, football,
basketball, etc., click the icon to start the exercise.
Weather
When the watch is connected to the APP, the weather interface will display
real-time weather temperature and weather type.
Messages
After the watch is connected to the APP, open the push of relevant
information in the APP terminal, and the watch terminal can receive the
corresponding message push and save the latest 15 messages at most.
Set up the
The setting function, contains screen display (switch dial, bright screen
duration, brightness adjustment, turning wrist, and bright screen), language,
vibration strength, menu style, battery, password, time settings, two -two-
dimensional code, and system.
Music
When the watch is connected to the APP, you can control the pause and start of
the mobile music player, adjust the volume, and switch songs.
Sedentary reminder
You can open it in the APP[Device > Sedentary Reminder]. After opening it, you
can set the start time, end time, and do not disturb time.
Sleep
Display the sleep monitoring status of the day, the data is updated daily, and
the data can be saved simultaneously when connecting the APP. Sleeping the
sleep interface can display the sleep data generated for nearly seven days.
Timer
Click the timer function, start to timing, click the pause button to timely
stop, and click the reset button to count the time to zero.
Movement data
The number of steps, distance, and calories recorded on the day are displayed,
and the target number of steps, distance, and calories can be set in the APP.
Drink time
You can open it in the App[Settings > Water Reminder], and set the start time,
end time, and reminder interval after opening.
Looking for a mobile phone
After the watch is connected to the APP, click to find the phone, the phone
will ring and the watch will show that the search is successful. If the watch
and the APP are not connected, the watch side will prompt to show bluetooth
disconnect.
The control center
Function introduction: screen brightness adjustment, do not disturb mode, menu
style, audio Bluetooth, settings, system information, find mobile phone, music
playback.
Bluetooth phone
Dialing interface After connecting to a mobile phone, you can quickly search
for contacts based on the address book and recent call list, or dial directly.
(Audio Bluetooth connection required)
Q&A
-
The watch cannot start
Please hold down the power button for more than 6 seconds or the battery may be low. Please charge it in time. -
Bluetooth is not connected or cannot be connected
-
Please try to restart the watch and re-link.
-
Please try to restart Bluetooth and connect again.
-
Don’t connect your phone to other Bluetooth devices at the same time.
-
Watch measuring heart-rate/blood pressure/blood oxygen/error
-
Generally for measurement, the watch sensor and the human body are caused by poor contact.
-
Please pay attention to full contact between the sensor and the wrist during measurement.
-
For people with darker skin color and hairy arms, please enable enhanced measurement in the App[Device > Enhanced measurement].
-
Sleep data is not accurate enough
-
Sleep monitoring simulates people’s self-perceived state of falling asleep and waking up, which needs to be worn correctly.
-
If you wear it too late or when you fall asleep, errors may occur.
-
Sleep data is not monitored during the day, and the default sleep monitoring is from 9:30 PM to 12:00 noon the next day.
For more frequently asked questions, please check the App[My FAQ]
Bluetooth data transmission
When connected to a mobile phone, the watch synchronizes some data, including weather, notifications, sports, and health data, with the phone via Bluetooth. When the connection is disconnected or Bluetooth is turned off, the data will not be synchronized.
Note
- Do not charge in a humid environment with water
- please regularly use a clean flannelette to clean the magnetic suction charging hole on the back of the watch, to ensure that the magnetic suction charging hole and magnetic charger fit, to ensure normal charging
- This product is not equipped with a power adapter, to ensure the safety of the family and property, when charging, you can use the computer USB interface or choose a power adapter whose output is not more than SV IA. Please buy the power adapter through the regular channel, and avoid using the bottom quality and fake power adapter to avoid bursting or fire.
Matters needing attention
- The measurement results of this product are only for industrial examination and are not used for any medical use or basis. Please follow the doctor’s guidance and do not use the measurement results for self-diagnosis and treatment.
- this product’s waterproof grade is IP67, and can not be used for deep diving and a long time in the water. In addition, this product does not put hot water, because the steam will affect the watch.
- The Company reserves the right to modify the contents of this manual without prior notice. Some functions are different in the corresponding software version. This is normal.
FCC STATEMENT
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, under Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used by the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>