PHILIPS LUM11065RU70X2-20 Ultinon Pro7000 SI Car and Truck Signaling Bulb Owner’s Manual
- June 1, 2024
- Philips
Table of Contents
PHILIPS LUM11065RU70X2-20 Ultinon Pro7000 SI Car and Truck Signaling Bulb
Enjoy lasting brightness for a safer drive.
Brighter, elegant signals
For a stylish and safe drive, upgrade to Philips Ultinon Pro7000 LED-RED
[≈W21W] for your rear fog and stop lights. Their intense red color looks great
and increases visibility so you can signal safely and stylishly.
Superior visibility for safer driving
- Signal your intent with brighter exterior lighting
- Instant safety information for other drivers
- Ergonomic design with 360° beam pattern
High-end, stylish signaling
Upgrade your lights, upgrade your style.
Performance made to last
- Enhanced lifetime of up to 5,000 hours
- Aluminum heatsink to dissipate heat more efficiently
Simple plug-and-play replacement
- Easy to install and compatible with most car models
- Constant IC driver ensures electrical compatibility with mos
- Easy to install on your car
Highlights
Powerful brightness
Signaling the intended movement of your vehicle is vital to your safety. To
avoid collisions, other people need to know what youre doing. And when poor
weather reduces visibility, the need for bright and vibrant signaling becomes
even greater. Philips Ultinon Pro7000 LED signaling lights provide powerful
brightness with 15 LEDs for your signals. They will help you to see and be
seen better, warning other drivers of your movements, which is vital for them
to react sooner. The more you see or are seen, the safer your drive will be!
Instant-on technology
Compared to incandescent lamps, Philips Ultinon Pro7000 LEDs light up
instantly to ensure that other drivers can react faster, keeping you safer.
Uniform light distribution
For your turn indicator, reverse, rear fog and stop signals, the Philips
Ultinon Pro7000 LED gives you uniform light distribution. Its 360 angle
ensures that the light is projected where you need it. Not only can you see
more of the road, but other drivers can also see more of you.
Elegant LED light
While the main goal of exterior lighting is to help you see and be seen,
there’s no reason why you shouldn’t look good at the same time. If you’re
wanting to upgrade your style without buying a newer car, replacing your
exterior lighting with Philips Ultinon Pro7000 LED signals is a smart way to
spend your money.
Lifetime of up to 5,000 hours
You want bright, stylish car lights but you dont want to keep replacing failed
lamps. That’s a major weakness of conventional bulbs – the more powerful the
light, the shorter its lifespan. Even at a higher light intensity, LEDs last
much longer. Philips Ultinon Pro7000 LED lights are built to last. Due to
features such as high-end LED technology and advanced heat-management systems,
they last for up to 5,000 hours of operation.
Super-robust lamps with aluminum material
When operating, LEDs generate heat which reduces their brightness and overall
lifespan. Philips Ultinon Pro7000 LED lights feature an aluminum heatsink
which dissipates heat much faster than the plastic material used by low-cost,
inferior-quality bulbs. That makes our lamps more robust and longer-lasting.
Ready, steady, installed!
Enjoy the plug-and-play experience: Philips Ultinon Pro7000 LED lights use the
same standard caps as the conventional lamps on your car, enabling you to
upgrade with no modification needed, so replacement is easy and quick.
Electrical compatibility with most cars and trucks
LED retrofit and conventional bulbs differ from one another in terms of
wattage, composition, and power consumption. Replacing your conventional bulbs
with other LEDs may prove problematic. Thanks to the built-in constant IC
driver, Philips Ultinon Pro7000 bulbs can work within 9-32 volt systems and
are electrically compatible with most cars and trucks. Canbus adapters are
available as accessories for troubleshooting if needed. We sell a complete
solution.
Polarity-free design
Enjoy the plug-and-play experience: the Philips Ultinon Pro7000 comes with
polarity-free design, so you don’t need to worry about the polarity during
installation. It will save you time and make installation easier.
Specifications
Marketing specifications
- Product highlight: Polarity-free, Automotive Grade LED, Powerful brightness, Uniform light distribution
- Expected benefits: Brighter, elegant signals
Product description
- Application: Stop lights and rear fog lights
- Base: Universal wedge base
- Designation: W21W LED red 11065 RU70 12/24V X2
- Homologation ECE: NO
- Range: Ultinon Pro7000 SI
- Technology: LED
- Type: LED-RED [≈W21W]
- Voltage: 12V+24V V
Lifetime
Life time: 5000 hrs
Light characteristics
- Lumens: 115lm(12V) 120lm(24V)
- Color temperature: RED
Electrical characteristics
- Wattage: 2.6W(12V), 3.2W(24V) W
- Voltage: 12V+24V V
Ordering information
- Order entry: 11065RU70X2
- Ordering code: 72669430
Packaging Data
- EAN1: 6974260726694
- EAN3: 6974260726700
- Packaging type: X2
Packed product information
- Length: 7,0 cm cm
- Width: 2,5 cm cm
- Height: 11,5 cm cm
- Pack Quantity: 2 pcs
- MOQ (for professionals): 10 packs
- Gross weight per piece [g]: 40
Outerpack information
- Length: 19,5 cm cm
- Width: 15,5 cm cm
- Height: 8,5 cm cm
- Gross weight [kg]: 0,46
© 2024 Koninklijke Philips N.V.
All Rights reserved.
Specifications are subject to change without notice. Trademarks are the
property of Koninklijke Philips N.V. or their respective owners.
www.philips.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>