SENXIN SX6 Wireless Microphone User Manual
- June 1, 2024
- SENXIN
Table of Contents
SENXIN SX6 Wireless Microphone
Specifications
- Compliance: Part 15 of FCC Rules
- Interference Conditions: Must not cause harmful interference; Must accept any received interference
- RF Exposure: Meets general requirements for portable exposure without restriction
Product Usage Instructions
General Guidelines
Before using the device, carefully read and understand the user manual
provided. Follow all instructions to ensure proper operation and compliance
with regulations.
Setting Up the Device
- Unbox the device and check for any physical damage.
- Ensure the device is charged or connected to a power source as per the user manual.
- Power on the device following the specified method.
Operating the Device
- Follow user manual instructions for specific functions and features.
- Avoid using the device in a manner that may cause interference to other equipment.
- If experiencing any issues, refer to the troubleshooting section inthe user manual or contact customer support.
Introduction
- Thanks for choosing our product.
- This product is a smart wireless microphone that provides professional-grade recording output. Plug and play, no app required. Multiple uses: It can be used in online live broadcast, video Vlog shooting, program interview, recording, video teaching and other occasions.
- This product consists of three parts: a charging box, microphone transmitting end, and receiving end. (as shown in the figure below, some models have no charging box, subject to the real object)
ID Diagram
- On-off key
- Microphone clip
- Windproof net
- Connection, noise reduction/acoustic indicator
- Mute indicator light
- Reverberation indicator light
- Power indicator light
- Microphone TYPE-C charging port
- Charging contact
- Mobile phone interface
- Receiver indicator light
- Power display screen
- Charging case indicator light
- Charging box TYPE-C Charging port
How to use
- Step 1: Connect the receiver to the phone with the port.
- Step 2: Press the switch key of the microphone, the indicator light turns green, and then power is turned on.
- Step 3 : The indicator light of the receiver keeps always on, then open the phone camera, live App or other Apps, and then to use the microphone to receive sound.
Special Note
- For the use of port: there is no battery in the receiver, and no need to recharge during live. If the phone is low power during Live, it can be recharged directly through a Type-C port.
- Do not use fast-charging chargers
About Ul
Microphone Transmitter
Receiver
Packing List
Content of packing
- Microphone transmitter
- Lightning receiver
- Charging box
- Charging cable
- User manual
FCC Statement
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, under part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used by the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
- this device may not cause harmful interference,
- this device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
The device has been evaluated to meet general RF exposure requirements. The
device can be used be in portable exposure without restriction.
FAQ
- Q: What should I do if the device is not powering on?
- A: Check if the device is properly charged or connected to a power source. If the issue persists, refer to the troubleshooting steps in the user manual.
- Q: Can I use the device in areas with high RF exposure?
- A: The device is designed to meet general RF exposure requirements for portable use without restrictions. However, avoid prolonged exposure in high RF environments.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>