A AURA DVSQ8 Mini Video Camera Instruction Manual

June 12, 2024
A AURA

DVSQ8 Mini Video Camera

Camera Key Instruction

  1. on/off key
  2. Mode key
  3. Infrared lights
  4. HD lens
  5. MIC
  6. Sling hole
  7. Mini usb interface
  8. LED indicator
  9. Micro SD card slot
  10. Reset key

Remind

  1. Please insert a micro SD card before use, otherwise open the camera, the red lights&blue lights flashing 5 seconds in the same time, then the camera will shutdown automatically.
  2. Due to the long time transport, the camera battery will in the low power, please charging 2hours or 3hours before use.
  3. Please take it in the full lighting environment to use, and the camera recording video’s best distance is above 50cm.
  4. fter opened the camera if you do no operations,1 minutes after the camera will shutdown automatically.

Product Features

  1. HD 1080P video quality
  2. Import OV9712 HD lens
  3. 2 video formats:1280X720P 1920X1080P
  4. 1.2MP (4032×3024) take photos
  5. 2 motion detection video optional mode:720P and 1080P
  6. High-speed USB2.0 interface
  7. Support micro SD card(max 32G)
  8. Support video output
  9. Built-in rechargeable lithium battery, works time about 100 minutes

Camera Operation Instruction

Charging Ways
This camera built-in rechargeable lithium battery ,please charging before use :
See also
https://www.camapp365.com/camera/how-to-use-the-t186-mini-camera

  1. take the USB cable connect with computer to charge.
  2. take the USB cable connect with power adapter to charge

TIPS

  1. when charging, this camera’s blue lights is lighting, when charging full, the red lights &blue lights is lighting.
  2. when the battery in the low power or the micro SD card is full, this camera’s red lights&blue lights will flashing 5seconds, then camera will shutdown.

3 in 1 USB cable

  1. connect the computer for charge or data transmission.
  2. connect the TV OUT to video output
  3. connect the 5V power adapter

Open the 720P Recording Mode Steps

  1. click the”on/off” key until the blue lights is lighting
  2. click the ”on/off” key 1 times again
  3. when the blue lights flashing 3 times.it’s open a 720P recording mode successful.
    when the camera start recording and the lights is not lighting, the camera every 5 minutes to save a video to the micro SD card.if click the “on/off” key 1 times, the camera will stop recording.and return to the standby mode with the blue lights is lighting.

Open the 1080P Recording Mode Steps

  1. click the”on/off” key until the blue lights is lighting
  2. click the“mode” key 1 times, the red lights&blue lights is lighting
  3. click the ”on/off” key 1 times again, when the red lights&blue lights flashing 3times, it’s open a 1080P recording without flashing successful.

when the camera start recording and the lights is not lighting, the camera every 5 minutes to save a video to the micro SD card.if click the “on/off” key 1 times, the camera will stop recording.and return to the standby mode with blue lights is
lighting.

Open the 1.2MP Take Photos Mode Steps

  1. click the”on/off” key to open the camera to the standby mode
    See also How To Use The T186 Mini Camera
    How To Use The T186 Mini Camera – camapp365.

  2. click the “mode” key 2 times

  3. when the ref lighos mode successful.

when you click the “on/off” key 1 times and red lights flashing 1 timts is lighting,It’s open take photes, it will take a photos, and it will save automatically.

Open the IR Night Vision recording Mode Steps

Open Steps

  1. click the “on/off” key to open the camera to the standby mode
  2. long-time press the “on/off” key about 2 seconds until the red lights flashing 2 times.it’s open IR night vision mode successful, and start IR night vision recording video.

Close Steps

  1. long-time press the “on/off” key about 2 seconds until the red lights flashing 2 times
  2. then the IR night vision recording has be closed.

Open the Motion Detection Recording Mode Steps

Open the 720P Motion Detection Recording Mode

  1. click the“on/off” key to open the camera to the standby mode
  2. long-time press the”mode”key 3 seconds
  3. when the blue lights is lighting and the red lights flflashing 3 times after it’s open the 720P motion detection mode successful.
    If the camera detected a moving that will be recorded and the blue&red lights flashing 3 times in the same time, the camera every 5 minutes to save a video to the micro SD card.if has no moving be detected, it will stop recording to the standby mode.(click  any key 1 times, the camera will exit the motion detection mode )

Open the 1080P Motion Detection Recording Mode

  1. click the”on/off” key until the blue lights is lighting
  2. click the“mode” key 1 times, it’s open a 1080P recording mode and
  3. after the red lights&blue lights is lighting, long-time press the”mode”key 3 seconds
  4. when the blue lights is lighting and the red lights flflashing 3 times,it’s open the 1080P motion detection mode successful.
    If the camera detected a moving that will be recorded and the blue&red lights flashing 3 times in the same time, the camera every 5 minutes to save a video to the micro SD card.if has no moving be detected, it will stop recording to the standby mode.(click  any key 1 times, the camera will exit the motion detection mode )

Open the Charging While Recording Mode

  1. Insert a micro SD card to the camera
  2. take the USB cable connect the camera to charge
  3. then the camera will open 720P recording mode automatically.

TV OUT Mode

  1. open the camera
  2. take the USB ‘s TV cable connect the TV
  3. so you can view the video via the TV display.

Reset Function

When the camera crashes, or invalid keys, or the camera can not be used normally, you can press the reset key to use it.

Shutdown
Long-time press the “on/off”key about 6 seconds, until the red&blue lights went out.

Connect the Computer
When the camera on the standby mode or shutdown, can be used to connect to the computer as a U disk.you can make the file copy, clip, delete, or grid. When the camera connected the computer, if the blue lights means data transmission, if the red lights means  charging.

TIPS:

  1. when the camera connect the computer,30 seconds later, if the computer does not recognize it, please reset it and connect the computer again. 2.recommend using the card reader read video files to the computer to play, it more quickly to view the video.

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals