Gemline Adak Water Resistant 20W Outdoor Bluetooth Speaker Instruction Manual
- June 6, 2024
- Gemline
Table of Contents
Gemline Adak Water Resistant 20W Outdoor Bluetooth Speaker
Overview
Product structure:
- Power LED indicator
- Power switch
- PREVIOUS/VOL-
- Multi-function button(MFB)
- NEXT/VOL+
- Mode switching
- LED indicator
- Micro SD card slot
- Type-C charging interface
- AUX in
Operation
Power ON/OFF
1. Long press the power switch for 2 seconds to turn on, the LED status
indicator flashes blue and the power LED indicator lights up white.
2. Long press the power switch for 2 seconds to turn off, the LED status
indicator goes off.
Bluetooth Operation
- Please ensure that the Bluetooth function has been turned on in the settings of your Bluetooth enabled device.
- Turn the speaker on, the indicator light will flash to detect Bluetooth enabled devices near you and will enter pairing mode. The indicator light will go off if no Bluetooth devices are detected within 10 minutes.
- ”GEMLINE SPKR” will appear on the Bluetooth device list, select “GEMLINE SPKR” to establish pairing. If instructed to enter a PIN code, please enter ‘0000’.
- When you want to play audio from another Bluetooth device, disconnect the speaker from the original device and follow steps 1-3 to re-pair the speaker with a new Bluetooth enabled device.
Answer incoming calls
Press the MFB button to answer incoming calls.
Tip : Since some mobile phones default to answer calls via their own
receiver, please refer to the instructions of your phone and set on your
phone.
End the call
Press the MFB button once to end the current call.
Refuse incoming calls
Long press the MFB button for 2s to reject when there comes a call.
Last number redial
Dual press the MFB button to redial the last calling number.
Mode switching
Short press M to select mode. (Bluetooth/Micro SD card/AUX in)
Bluetooth disconnection
Long press the MFB button for 2 seconds to cut off the Bluetooth connection.
TWS connection
1. Long press the M button for 2 seconds to cut off the speakers TWS
connection.
2. Long press the M button for 5 seconds to erase the pairing record. (The
speaker will automatically shut down when the pairing record erased
successfully.)
Micro SD card mode
Insert a micro SD card, the speaker will automatically recognize (with a voice
prompt) and automatically broadcasts MP3 format music in it. (The Max storage
of the micro SD card is 32GB).
AUX mode
Connecting your music player/phone to the speaker via the provided dual 3.5mm
audio cable, then the speaker will automatically recognize.
Music playing
1. Short press the MFB to pause/play;
2. Long press the “-”for PREV;
3. Long press the “+”for NEXT.
4. Short press the“-”for VOL－;
5. Short press the“+”for VOL＋.
True Wireless Stereo (TWS) Fit for two GEMLINE SPKR speakers
You can connect two GEMLINE SPKR speakers as a pair for stronger stereo and
surrounding effect.
1. Make sure the Bluetooth function is OFF on your Bluetooth player;
2. Turn on two speakers;
3. Long press M button on either speaker for 2 seconds, then there comes up a
melody which means the two speakers are now in TWS pairing status. Until LED
of the right channel speaker lights up steady blue and the LED of the left
channel speaker flashes, the TWS connection is successful.
4. Then active the Bluetooth of your phone and search for “GEMLINE SPKR”.
Click manually to connect. The two speaker LED turns to be steady blue if the
connection is successful.
5. The function of TWS must be matched before connecting to the mobile
devices. Otherwise, the function of TWS cannot be matched after connecting to
mobile devices.
6. The two speakers can automatically achieve TWS re-connection for the
future use.
7. Long press the M for 5s after power on can reset and restart the speak.
8. In TWS connection, only the left channel speaker has hands-free call
function.
Charging
1. As product has built-in non-removable and rechargeable battery, please use
the provided micro USB cable to charge.
2. Charging voltage and current is 5V/2.4A, PLS charge the speaker with the
input power below 5V/2.4A.
3. Please choose the charger that is certified by the regular manufacturer.
4. The battery performance may decrease as repeating charging and using the
speaker. It’s a normal phenomenon for all rechargeable batteries.
5. Charge if the power LED indicator lights up red, and it goes off upon
charging finished.
WARNING:
1. Do not disassemble, repair, or modify the speaker.
2. Do not place product in or near fire to avoid danger, as it uses a lithium
battery.
3. Avoid storage at extreme temperatures, this can shorten the battery life
and may affect the speaker.
4. Keep the speaker dry and do not store the speaker in damp areas to avoid
damage to the speaker.
5. Avoid dropping the speaker as it may damage the speaker.
KIND REMINDER
1. To prolong the speaker’s life span and to avoid hearing damage, please do
not listen to music under high volume for long periods of time.
2. When an error occurs with the speaker, please turn off the speaker and
restart it to troubleshoot.
3. When the speaker’s power is low, the Bluetooth range may be affected.
Please charge the speaker to avoid disruptions during use.
Specification
- Model: Adak Bluetooth® 20W Speaker IP7 Bluetooth version: Bluetooth® V5.0
- Profiles supported: A2DP、AVRCP、HFP、HSP Wireless working range: 18M (without obstacles) Battery: 3600mAh
- Input voltage: DC5V/2.4A
- Peak power: 25W
- Frequency Response: 115Hz-15kHz
- SNR:≥80DB
- Product size: 186x50x62mm
- IPX7 waterproof
Packing list
- Bluetooth® Speaker
- USB Charging Cable
- Audio Cable
- User Manual
- Gift Box
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>