Gude DS 160-2 Delta Sanding Machine Instructions
- June 3, 2024
- Gude
Table of Contents
Gude DS 160-2 Delta Sanding Machine
Please read the instructions carefully before starting the machine.
DELIVERY RANGE
Starting-up the machine
Press carefully the fuzzy side of the sanding disc against the packaging pad,as firmly as possible.
Operation
START
STOP
Accessory
Cleaning / Maintenance
Technical Data
| Delta sander | DS 160-2 |
|---|---|
| Art. No | 58136 |
| Service connection | 230 V ~ 50 Hz |
| Rated input | 160 W |
| No-load speed | 11500 min-1 |
| Orbital travel diameter | 0,8 mm |
| Dimensions of grinding plate | 140 x 100 mm |
| Weight | 1,0 kg |
| Noise details | |
| Sound pressure level LpA | 73,6 dB(A) |
| Sound power level LWA | 84,6 dB(A) |
Measured according to EN 60745; Uncertainty K = 3 dB (A)
Wear ear protectors!
Vibration details|
Vibration total values (triaxial vector sum) deter- mined according to EN
60745:
Vibration emission value ah| 3,298 m/s²
Uncertainty K = 1,5 m/s2
WARNING: The vibration emission level will vary because of the ways in
which a power tool can be used and may increase above the level given in this
information sheet. The vibration emission level may be used to compare one
tool with another.It may be used for a preliminary assessment of exposure. An
accurate estimate of the vibratory load should also take into account the
times when the tool is shut down or when it is running but not actually in
use. This may significantly reduce the vibratory load over the total working
period. Identify additional safety measures to protect the operator from the
effects of vibration such as: maintaining the tool and the accessories, keep
the hands warm, and organization of work patterns. Read and understand the
operating instructions before using the appliance. Familiarise with the
control elements and how to use the appliance properly. Abide by all the
safety measures stated in the service manual. Act responsibly toward third
parties. The operator is responsible for accidents or risks to third parties.
Persons over 16 years of age can only work on the appliance. An exception
includes youngsters trained in order to reach knowledge under the supervision
of the trainer during occupational education. In case of any doubts about
connection and operation refer please to our customer center
Specified Conditions Of Use
The sander can be used for sanding wood, plastics and metal. This machine is
suitable only for dry sanding. Do not use this product in any other way as
stated for normal use. Not observing general regulations in force and
instructions from this manual does not make the manufacturer liable for
damages.
Emergency procedure
Conduct a first-aid procedure adequate to the injury and summon qualified
medical attendance as quickly as possible. Protect the injured person from
further harm and calm them down. If you seek help, state the following pieces
of information:
- Accident site,
- Accident type,
- A number of injured persons,
- Injury type(s)
Symbols
- WARNING / Caution!
- Read the operating instructions to reduce the risk of injury.
- Wear eye protective goggles ! Wear ear protectors!
- Wear a suitable dust protection mask.
- Wear gloves
- Unplug the machine before any work on it.
- Class II tool.
- CE marking
- Any damaged or disposed electric or electronic devices must be delivered to appropriate collection centers.
WARNING Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference.
Sander safety warnings
Wear ear protectors. Exposure to noise can cause hearing loss. Use protective equipment. Always wear safety glasseswhen working with the machine. The use of protective clothing is recommended, such as dust mask, protective gloves, sturdy non-slip footwear and ear defenders. The dust produced when using this tool may be harmful to health. Do not inhale the dust. Use a dust absorption system and wear a suitable dust protection mask. Remove deposited dust thoroughly, e.g. with a vacuum cleaner. Do not machine any materials that present a danger to health (e.g. asbestos).
Mains Connection
Operation is only allowed with a safety switch against stray current (RCD max. stray current of 30mA). Connect only to single-phase AC system voltage as indicated on the rating plate. It is also possible toconnect to sockets without an earthing contact as the design conforms to safety class II. Only plug-in when the machine is switched off. Do not let any metal parts reach the airing slots – danger of short circuit!
Maintenance
Unplug the machine before any work on it. Repairs and works specified in these Instructions may only be performed by qualified authorized staff. Use only original accessories and original spare parts. Keep the device, in particular the air vents, clean at all times. Never spray water on the device’s body! Do not clean the plastics with solvents, or flammable or toxic fluids. For cleaning, use a damp cloth only. Caution! If the power cord of the appliance gets damaged, it must be replaced by the manufacturer or its customer service or a similarly qualified person to avoid danger. Only a regularly maintained and treated appliance can serve as a satisfactory aid. Insufficient maintenance and care can lead to unforeseen accidents and injuries. If necessary, a list of spare parts can be found at www.guede.com.
Translation of the EC-Declaration of Conformity
We, hereby declare the conception and construction of the below-mentioned
appliances correspond – at the type of construction being launched – to the
appropriate basic safety and hygienic requirements of EC Directives. In case
of any change to the appliance not discussed with us the Declaration expires.
GÜDE GmbH & Co. KG
Birkichstrasse 6
74549 Wolpertshausen
Deutschland
Tel.: +49-(0)7904/700-0
Fax.: +49-(0)7904/700-250
eMail:info@guede.com