COREDY V1.0 B1 Bluetooth Tracker Installation Guide
- June 1, 2024
- coredy
Table of Contents
COREDY V1.0 B1 Bluetooth Tracker
Indication Guide
- Remove the protective insulation film from Item Finder before use.
- When the item finder is removed from the Find My app and not paired for 3 minutes, it automatically switches to Power Off.
- Version 1.0
Function Button & Buzzing Sound Indication
| Item Finder’s Status | Function Button | Buzzing Sound |
|---|---|---|
| Power On | Press once | Chord tones |
Melody
Ready to Connect| Press twice continuously| One (1) sound
Beep
“Play Sound” to locate| –| Thirteen (13) sounds
Beep…Beep…Beep…Beep…
Beep…Beep…Beep…Beep…
Beep…Beep…Beep…Beep…
Beep…
Remove| –| Chord tones
Melody
Reset| Press five times continuously.
(Short press 4 times rapidly,
then long press for the 5th
time until you hear a chord
tone melody emitted.)| Chord tones
Melody
Power Off| Press and hold for 3 seconds| Two (2) sounds
Beep…Beep…
FAQ
How do I activate my Item Finder?
Remove the protective insulation film and press the function button once to power it on.
What happens if the Item Finder is not paired for 3 minutes?
If the Item Finder is removed from the Find My app and not paired for 3 minutes, it will automatically switch to Power Off.
How can I locate the Item Finder using sound?
To locate the Item Finder, it will emit thirteen (13) beeping sounds.
How do I reset the Item Finder?
To reset the Item Finder, press the function button five times continuously. Short press four times rapidly, then long press for the 5th time until you hear a chord tone melody emitted.
How do I turn off the Item Finder?
Press and hold the function button for 3 seconds to power off the Item Finder.
- Remove the protective insulation film from Item Finder before use.
- When the item finder is removed from the Find
- My app and not paired for 3 minutes, it automatically switches to Power Off.
Function Button & Buzzing Sound Indication
| Item Finder’s Status | Function Button | Buzzing Sound |
|---|---|---|
| Power On | Press once | **** |
| Ready to Connect | Press twice continuously | **** |
| “Play Sound” to locate | **** |
–
| –
| Thirteen (13) sounds| Beep…Beep…Beep…Beep…
Beep…Beep…Beep…Beep…
Beep…Beep…Beep…Beep… Beep…
| **
Remove| –| –| Chord tones| Melody| **
Reset| Press five times continuously (Short press 4 times rapidly, then long
press for the 5th time until you hear a chord tone melody emitted.)|
| Chord tones| Melody|
Power Off| Press and hold for 3 seconds| | Two (2) sounds| Beep…Beep…|