Sonicmodell Twin Multirole FPV Platform Assembly Instruction Manual
- June 8, 2024
- Sonicmodell
Table of Contents
Sonicmodell Twin Multirole FPV Platform Assembly Instruction Manual
Specifications:
Wingspan: 1200mm (47.24″)
Length: 953mm (37.52″)
Meterail: High Quality EPO
Recommended Optimized Power Combo
Motor: 2212-1100KV 2
Servos: 9g metal gear 6
Prop: 3-blade 84.52
Recommended Battery: 4S 3000-540mAh
Installation
Install the servos for the Ailerons and (optional) Flaps.
All the accessories for that matter are provided with the KIT. In case you
have purchased the DUSK LED System, this is a good time also to install the
wing lights.
Once you’re done, close the motor housing and glue the light protection in
place.
Install the servos for the Elevator and Rudder. You can dry-fit all the
distances placing your Vertical and Horizontal Stabilizer without glue. Once
you’re happy, screw your servos in place and glue the plastic servo protection
like is shown in the picture.
Glue your Vertical and Horizontal Stabilizers in place. Be sure they’re
aligned 90 degrees from each other. This is a good time to install the Tail
light in case you have the DUSK LED System.
Connect your pushrods to the servo horns, checking that every thing is nice
and tight.
Finally, you can attach your wings to the fuselage, and install the rest of
your equipment as you please, along the fuselage or on the main wings: FPV
gear, Battery, Receivers, etc.
BINARY PREMIUM ACCESSORIES (SOLD SEPARATELY)
Optimized Power Combo
DUSK LED Lighting
System
Modular Landing Gear
Plastic Belly Protection
Servo Pack (9g x 2)
3-Blade 8*4.5 Prop x 2
Mapping Camera Bay (camera is not included)
CHECKING YOUR CONTROL SURFACES:
FLAPS: We recommend you to use a 3-position switch for the Flaps. Check your radio MIXES documentation for this matter.
Sonicmodell Twin Multirole FPV Platform Assembly Instruction Manual –
Download [optimized]
Sonicmodell Twin Multirole FPV Platform Assembly Instruction Manual –
Download